Динамик НЧ MOREL Titanium Former Woofer TIW 634FT. Инструкция на английском языке

NEW
INSERT PICTURE
TiW 634Ft
Titanium Advanced Woofer
O 6", O 3" voicecoil, 4?
SPECIFICATIONS
General Data                                               FEATURES
Overall Dimensions         DxH   160mm (6.3") x 69mm (2.71")  * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN)  P  150W                      * Double magnet Ferrite system
Transient Power 10ms             1000W                     * Titanium coil bobbin
Sensitivity 2.83V/1M             88dB                      * 3" Large Hexatech™ Aluminum voice coil
Frequency Response               See graph                 * High power handling
Cone Material                    Damped Polymer Composite  * High Xmax, Low Qts, Low Fs, High QMS
Net Weight                 Kg    1.2 Kg
Electrical Data                                            Unit Dimentions
Nominal Impedance          Z     4?
DC Resistance              Re    3.6 ?
Voice Coil Inductance @ 1KHz  LBM  0.45 mH
Voice Coil and Magnet Parameters
Voice Coil Diameter        DIA   75 mm (3")
Voice Coil Height                14.5 mm (0.62")
HE Magnetic Gap Height     HE    6 mm (0.20")
Max. Linear Excursion      X     ± 4.25mm
Voice Coil bobbin                Titanium
Voice Coil Wire                  Hexatech™ Aluminum
Number Of Layersumber Of Layers
N                                2 2
Magnet System Type               Double Magnet Ferrite
B Flux Density             B     0.66 T
BL Product                 BXL   5.6 N.A
T-S Parameters                  Small Signal    1 V
Suspension Compliance      Cms   0.998 mm/N 1.273 mm/N     A - Overall diameter            160mm
Mechanical Q Factor        Qms   4.30      4.50            B - Cut out diameter            140mm
Electrical Q Factor        Qes   0.43      0.43            C - Flange thickness                6mm
Total Q Factor             Qts   0.39      0.39            D - Overall height               69mm
Mechanical Resistance      Rms   0.923 ?m  0.803 ?m        E - Basket + magnet depth        63mm
Moving Mass                Mms   15.7 gr                   F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)  VAS   19.7 Lt.  26 Lt.          G - 6 Mounting holes, at 60? interval,
Resonant Frequency         Fs    40 Hz     34 Hz                 inner hole diameter      O 4.2mm
Effective Piston Area      SD    119 cm ?
0?
30?
45?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.