Динамик НЧ MOREL Titanium Former Woofer TIW 638ND. Инструкция на английском языке

NEW
INSERT PICTURE
TiW 638Nd
6" BASSMID. 8  ohm
Titanium coil bobbin
SPECIFICATIONS
General Data                                                  FEATURES
Overall Dimensions       DxH  160mm (6.3") x 69mm (2.71")     * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN)  P  150W                         * Hybrid™ Neodymium/Ferrite magnet system
Transient Power 10ms          1000W                           * Titanium coil bobbin
Sensitivity 2.83V/1M          87dB                            * 3" Large Hexatech™ Aluminum voice coil
Frequency Response            See graph                       * High power handling
Cone Material                 Injected Damped Polymer Composite  * High Xmax, Low Qts, Low Fs, High QMS
Net Weight               Kg   1.2 Kg
Electrical Data                                               Unit Dimentions
Nominal Impedance        Z    8?
DC Resistance            Re   5.40?
Voice Coil Inductance @ 1KHz  LBM 0.53 mH
Voice Coil and Magnet Parameters
Voice Coil Diameter      DIA  75 mm (3")
Voice Coil Height             15.5 mm (0.62")
HE Magnetic Gap Height   HE   5 mm (0.20")
Max. Linear Excursion    X    ± 5.25mm
Voice Coil bobbin             Titanium
Hexatech™ Aluminum
Voice Coil Wire
Voice Coil Wire               Hexatech™ Aluminum
Number Of Layers              2
Magnet System Type            Hybrid™ Neodymium/Ferrite
B Flux Density           B    0.81 T
BL Product               BXL  7.70 T.m
T-S Parameters                  Small Signal      1 V
Suspension Compliance    Cms 0.78 mm/N       1.07 mm/N        A - Overall diameter           160mm
Mechanical Q Factor      Qms 4.70            3.40             B - Cut out diameter           140mm
Electrical Q Factor      Qes  0.44           0.39             C - Flange thickness               6mm
Total Q Factor           Qts  0.4            0.35             D - Overall height              69mm
Mechanical Resistance    Rms 0.993?m         1.205?m          E - Basket + magnet depth       63mm
Moving Mass              Mms 17.0 gr         17.0 gr          F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)  VAS  15.5 Lt.     21 Lt.           G - 6 Mounting holes, at 60? interval,
Resonant Frequency       Fs   43 Hz          36 Hz                  inner hole diameter     O 4.2mm
Effective Piston Area    SD   119 cm ?       119 cm ?
0?
30?
45?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.