Динамик НЧ MOREL Titanium Former Woofer TIW 638FT. Инструкция на английском языке

NEW
INSERT PICTURE
TiW 638Ft
Titanium Advanced Woofer
O 6", O 3" voice coil, 8?
SPECIFICATIONS
General Data                                                   FEATURES
Overall Dimensions           DxH  160mm (6.3") x 69mm (2.71")  * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN)  P   150W                         * Double Magnet Ferrite system
Transient Power 10ms              1000W                        * Titanium coil bobbin
Sensitivity 2.83V/1M              86dB                         * 3" Large Hexatech™ Aluminum voice coil
Frequency Response                See graph                    * High power handling
Cone Material                     Damped Polymer Composite     * High Xmax, Low Qts, Low Fs, High QMS
Net Weight                   Kg   1.2 Kg
Electrical Data                                                Unit Dimentions
Nominal Impedance            Z    8?
DC Resistance                Re   5.40?
Voice Coil Inductance @ 1KHz  LBM 0.63 mH
Voice Coil and Magnet Parameters
Voice Coil Diameter          DIA  75 mm (3")
Voice Coil Height                 14.5 mm (0.62")
HE Magnetic Gap Height       HE   6 mm (0.20")
Max. Linear Excursion        X    ± 4.25mm
Voice Coil bobbin                 Titanium
Hexatech™ Aluminumexatech™ Aluminum
Voice Coil Wireoice Coil Wire
V                                 H
Number Of Layers                  2
Magnet System Type                Double Magnet Ferrite
B Flux Density               B    0.66 T
BL Product                   BXL  7.3 N.A
T-S Parameters                    Small Signal     1 V
Suspension Compliance        Cms 0.998 mm/N   1.308 mm/N       A - Overall diameter           160mm
Mechanical Q Factor          Qms 3.96         4.63             B - Cut out diameter           140mm
Electrical Q Factor          Qes  0.47        0.50             C - Flange thickness               6mm
Total Q Factor               Qts  0.42        0.45             D - Overall height              69mm
Mechanical Resistance        Rms 1.005 ?m     0.743 ?m         E - Basket + magnet depth       63mm
Moving Mass                  Mms 15.5 gr                       F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)    VAS  19.7 Lt.    25.8 Lt.         G - 6 Mounting holes, at 60? interval,
Resonant Frequency           Fs   40 Hz       35 Hz                  inner hole diameter     O 4.2mm
Effective Piston Area        SD   119 cm ?
0?
30?
45?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.