Динамик НЧ MOREL Titanium Former Woofer TIW 634ND. Инструкция на английском языке

NEW
INSERT PICTURE
TiW 634Nd
6" BASSMID. 4  ohm
Titanium coil bobbin
SPECIFICATIONS
General Data                                                 FEATURES
Overall Dimensions       DxH 160mm (6.3") x 69mm (2.71")     * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN) P  150W                         * Hybrid™ Neodymium/Ferrite magnet system
Transient Power 10ms         1000W                           * Titanium coil bobbin
Sensitivity 2.83V / 1M       88dB                            * 3" Large Hexatech™ Aluminum voice coil
Frequency Response           See graph                       * High power handling
Cone Material                Injected Damped Polymer Composite  * High Xmax, Low Qts, Low Fs, High QMS
Net Weight               Kg  1.2 Kg
Electrical Data                                              Unit Dimentions
Nominal Impedance        Z   4?
DC Resistance            Re  3.7?
Voice Coil Inductance @ 1KHz LBM 0.41 mH
Voice Coil and Magnet Parameters
Voice Coil Diameter      DIA 75mm (3")
Voice Coil Height            16 mm (0.62")
HE Magnetic Gap Height   HE  5 mm (0.20")
Max. Linear Excursion    X   ± 5.5mm
Voice Coil bobbin            Titanium
Hexatech™ Aluminumexatech™ Aluminum
V
Voice Coil Wireoice Coil Wire  H
Number Of Layers             2
Magnet System Type           Hybrid™ Neodymium/Ferrite
B Flux Density           B   0.81 T
BL Product               BXL 6.52 T.m
T-S Parameters                 Small Signal      1 V
Suspension Compliance    Cms 0.81 mm/N      1.29 mm/N        A - Overall diameter           160mm
Mechanical Q Factor      Qms 5.33           3.40             B - Cut out diameter           140mm
Electrical Q Factor      Qes 0.39           0.31             C - Flange thickness               6mm
Total Q Factor           Qts 0.36           0.29             D - Overall height              69mm
Mechanical Resistance    Rms 0.925 ?m       1.052 ?m         E - Basket + magnet depth       63mm
Moving Mass              Mms 17.8 gr        17.8 gr          F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)  VAS 16.5 Lt      25.50 Lt         G - 6 Mounting holes, at 60? interval,
Resonant Frequency       Fs  40.5 Hz        34 Hz                  inner hole diameter     O 4.2mm
Effective Piston Area    SD  119 cm ?       119 cm ?
0?
30?
45?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.