Шлицевые ножницы по металлу MAKITA JS1601. Инструкция на русском языке

GB  Metal Shear/ Straight Metal Shear   INSTRUCTION MANUAL
Ножиці для різання металу /
UA                                     ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
Прямі ножиці для різання металу
PL  Nozyce do blachy                   INSTRUKCJA OBSLUGI
RO  Foarfece pentru metal / Foarfece drept pentru metal MANUAL DE INSTRUCTIUNI
DE  Blechschere                        BEDIENUNGSANLEITUNG
HU  Lemezvago ollo / lemezvago ollo egyenes vagashoz   HASZNALATI KEZIKONYV
SK  Kovove noznice / Rovne kovove noznice  NAVOD NA OBSLUHU
CZ  Nuzky na plech / prime nuzky na plech  NAVOD K OBSLUZE
JS1000
JS1601
1

1
1
2
3
4                2
1                                       5
1               011064   2               011061  3                011062
1
1
4               011063  5                011060   6               011065
7               011066
2

ENGLISH (Original instructions)
Explanation of general view
1-1. Switch lever        3-2. Center blade        4-1. Hex wrench
2-1. Hex wrench          3-3. Side blade          5-1. Pin
2-2. Screw               3-4. Hex socket head bolt
3-1. Thickness gauge     3-5. Hex wrench
SPECIFICATIONS
Model                      JS1000            JS1601
Steel up to 400 N/mm   2  1.0 mm (20 ga.)   1.6 mm (16 ga.)
Steel up to 600 N/mm   2  0.7 mm (23 ga.)   1.2 mm (18 ga.)
Max. cutting capacities
Steel up to 800 N/mm   2  0.5 mm (26 ga.)   0.8 mm (21 ga.)
Aluminum up to 200 N/mm   2  2.5 mm (12 ga.)   2.5 mm (12 ga.)
Min. cutting radius           30 mm             250 mm
-1
Strokes per minute (min )                 4,500
Overall length               322 mm            320 mm
Net weight                            1.4 kg
Safety class                           /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE037-1
Intended use                           WARNING:
The tool is intended for cutting sheet steel and stainless   •   The vibration emission during actual use of  the
sheet steel.                             power tool  can  differ from the declared emission
ENF002-1   value depending on the ways in which the tool is
Power supply                             used.
The tool should be connected only to a power supply of   •   Be sure to identify safety measures to protect the
the same voltage as indicated on the nameplate, and can   operator that  are  based on an  estimation  of
only be operated on single-phase AC supply. They are   exposure in the actual conditions of use (taking
double-insulated in accordance with European Standard   account of all parts of the operating cycle such as
and can, therefore, also be used from sockets without   the times when the tool is switched off and when it
earth wire.                              is running idle in addition to the trigger time).
ENG104-2
Noise                                                              ENH101-14
The typical A-weighted noise level determined according   For European countries only
to EN60745:                          EC Declaration of Conformity
Sound pressure level (L pA) : 77 dB(A)   We  Makita  Corporation  as  the  responsible
Uncertainty (K) : 3 dB(A)         manufacturer declare that the following  Makita
The noise level under working may exceed 80 dB (A).   machine(s):
Wear ear protection.
ENG218-2   Designation of Machine:
Vibration                            Metal Shear, Straight Metal Shear
The vibration total value (tri-axial vector sum) determined   Model No./ Type: JS1000, JS1601
according to EN60745:                are of series production and
Work mode : cutting sheet metal   Conforms to the following European Directives:
Vibration emission (a h) : 9.5 m/s 2   2006/42/EC
Uncertainty (K) : 1.5 m/s 2       And are manufactured in accordance with the following
ENG901-1   standards or standardised documents:
•   The declared vibration emission value has been   EN60745
measured in accordance with the standard  test   The technical documentation is kept by our authorised
method and may be used for comparing one tool   representative in Europe who is:
with another.                         Makita International Europe Ltd,
•   The declared vibration emission value may also be   Michigan, Drive, Tongwell,
used in a preliminary assessment of exposure.   Milton Keynes, MK15 8JD, England
3