Перфоратор MAKITA HR4501C. Инструкция на русском языке

ENGLISH
INSTRUCTION MANUAL
Rotary Hammer
HR4501C
HR4510C
HR4511C
008364
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

ENGLISH
SPECIFICATIONS
Model                  HR4501C      HR4510C     HR4511C
Carbide-tipped bit            45 mm
Capacities
Core bit                   125 mm
-1
No load speed (min )                    130 - 280
Blows per minute                      1,250 - 2,750
Overall length                        458 mm
Net weight               7.8 kg       8.3 kg      8.4 kg
Safety class                           /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END201-2
Symbols                              SAVE THESE INSTRUCTIONS.
The following show the symbols used for the equipment.   Work area safety
Be sure that you understand their meaning before use.   1.   Keep work area clean and well lit. Cluttered and
?  Read instruction manual.      dark areas invite accidents.
2.   Do not operate power tools  in explosive
? DOUBLE INSULATION              atmospheres, such as  in the presence of
flammable liquids, gases or dust. Power tools
?  Only for EU countries         create sparks which may ignite the dust or fumes.
Do not dispose of electric  equipment   3.   Keep children and bystanders away  while
together with household waste material!   operating a power tool. Distractions can cause
In observance of  European Directive   you to lose control.
2002/96/EC on  waste electric and   Electrical Safety
electronic  equipment  and  its  4.   Power tool plugs must match the outlet. Never
implementation in accordance with   modify the plug in any  way. Do not use any
national law, electric  equipment that   adapter plugs with earthed (grounded) power
have reached the end of their life must   tools. Unmodified plugs and matching outlets will
be collected separately and returned to   reduce risk of electric shock.
an   environmentally  compatible  5.   Avoid body contact with earthed or grounded
recycling facility.            surfaces such as pipes, radiators, ranges and
ENE044-1   refrigerators.  There is an increased risk of
Intended use                             electric shock if your body is earthed or grounded.
The tool is intended for hammer drilling in brick, concrete   6.   Do not expose  power tools to rain or  wet
and stone as well as for chiselling work.   conditions. Water  entering a  power tool  will
ENF002-1
Power supply                             increase the risk of electric shock.
The tool should be connected only to a power supply of   7.   Do not abuse the cord. Never use the cord for
the  same voltage  as indicated on the nameplate,  and   carrying, pulling or unplugging the power tool.
can only be operated on single-phase AC supply. They   Keep cord away from heat, oil, sharp edges or
are double-insulated in accordance with European   moving parts. Damaged or  entangled  cords
Standard and can, therefore, also be used from sockets   increase the risk of electric shock.
without earth wire.                   8.   When operating a power tool outdoors, use an
GEA001-3   extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
GENERAL SAFETY RULES                     electric shock.
WARNING! Read all instructions. Failure to follow all   Personal Safety
instructions listed below may result in electric shock, fire   9.   Stay alert, watch what you are doing and use
and/or serious injury. The term "power tool" in all of the   common sense when operating a power tool.
warnings listed below refers to your mains-operated   Do not use a power tool while you are tired or
(corded) power tool or battery-operated (cordless) power   under the  influence of drugs, alcohol or
tool.                                    medication.  A  moment of inattention while
2

operating power tools may result  in  serious   21.  Keep cutting tools  sharp and clean. Properly
personal injury.                     maintained cutting tools with sharp cutting edges
10.  Use safety equipment.  Always  wear eye   are less likely to bind and are easier to control.
protection. Safety equipment such as dust mask,   22.  Use the power tool, accessories and tool bits
non-skid  safety shoes, hard hat,  or hearing   etc. in accordance with these instructions and
protection  used  for appropriate conditions will   in the manner intended for the particular type
reduce personal injuries.            of power tool, taking into account the working
11.  Avoid accidental starting. Ensure the switch is   conditions and the work to be performed. Use
in the off-position before plugging in. Carrying   of the power tool  for operations different from
power tools with  your finger on the switch or   those intended could result in a hazardous
plugging in power tools that have the switch on   situation.
invites accidents.               SERVICE
12.  Remove any adjusting key or  wrench before   23.  Have your power tool serviced by a qualified
turning the power tool on. A wrench or a key left   repair person using only identical replacement
attached to a rotating part of the power tool may   parts. This will ensure that the safety of the power
result in personal injury.           tool is maintained.
13.  Do not overreach. Keep proper footing and   24.  Follow  instruction  for  lubricating  and
balance at all times. This enables better control   changing accessories.
of the power tool in unexpected situations.   25.  Keep handles dry, clean and free from oil and
14.  Dress properly. Do not wear loose clothing or   grease.
jewellery. Keep your hair, clothing, and gloves                 GEB007-2
away from moving parts. Loose clothes,
jewellery or long hair  can  be  caught in moving   SPECIFIC SAFETY RULES
parts.                           DO NOT let comfort or familiarity  with product
15.  If devices are provided for the connection of   (gained from repeated use) replace strict adherence
dust extraction and collection facilities,   to rotary hammer safety rules. If  you use this tool
ensure these are connected and properly used.   unsafely or incorrectly,  you can suffer serious
Use of  these devices  can reduce  dust-related   personal injury.
hazards.                          1.   Wear ear  protectors. Exposure  to noise  can
Power tool use and care                  cause hearing loss.
16.  Do not force the power tool. Use the correct   2.   Use auxiliary handles  supplied  with the tool.
power tool for  your application. The  correct   Loss of control can cause personal injury.
power tool will do the job better and safer at the   3.   Hold power tools by insulated gripping
rate for which it was designed.      surfaces when performing an operation where
17.  Do not use the power tool if the switch does   the cutting tool may contact hidden wiring or
not turn it on and off. Any power tool that cannot   its own cord. Contact with a "live" wire will make
be controlled  with the switch  is dangerous  and   exposed metal parts of the tool "live" and shock
must be repaired.                    the operator.
18.  Disconnect the plug from the power source   4.   Wear a hard hat (safety helmet), safety glasses
and/or the battery  pack  from the  power tool   and/or face shield.  Ordinary eye or sun
before making any adjustments, changing   glasses are NOT safety  glasses.  It is also
accessories, or  storing power  tools. Such   highly recommended that  you  wear a dust
preventive safety measures reduce  the risk of   mask and thickly padded gloves.
starting the power tool accidentally.   5.   Be sure the bit  is secured in place before
19.  Store idle power tools out of the  reach of   operation.
children and do not allow persons unfamiliar   6.   Under normal operation, the tool is designed
with the power  tool or these instructions to   to produce vibration. The screws  can come
operate the power  tool.  Power tools are   loose easily, causing a breakdown or accident.
dangerous in the hands of untrained users.   Check tightness  of screws carefully before
20.  Maintain power tools. Check for misalignment   operation.
or binding of moving parts, breakage of parts   7.   In cold weather or when the tool has not been
and any  other condition that  may  affect the   used for a long time, let the tool warm up for a
power tools operation. If damaged, have the   while by operating it under no load. This will
power tool repaired before use. Many accidents   loosen up  the  lubrication. Without proper
are caused by poorly maintained power tools.   warm-up, hammering operation is difficult.
3