Перфоратор MAKITA HR3200C. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Rotary Hammer
Marteau rotatif
Martillo Rotatorio
HR3200C
HR3210C
HR3210FCT
008536
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre securite, priere de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR REFERENCE ULTERIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
1

ENGLISH
SPECIFICATIONS
Model                   HR3200C      HR3210C   HR3210FCT
Tungsten-carbide tipped bit   32 mm (1-1/4")
Concrete
Core bit                 90 mm (3-1/2")
Capacities
Steel                         13 mm  (1/2")
Wood                         32 mm  (1-1/4")
-1
No load speed (min )                    315 - 630
Blows per minute                      1,650 - 3,300
Overall length                398 mm (15-5/8")   424 mm (16-3/4")
Net weight              4.4 kg (9.7lbs)   4.8 kg (10.6lbs)   5.0 kg (11.0lbs)
Safety class                           /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
ENE044-1   5.   Avoid body contact with earthed or grounded
Intended use                             surfaces such as pipes, radiators, ranges and
The tool is intended for hammer drilling in brick, concrete   refrigerators.  There is an increased risk of
and stone as well as for chiselling work.   electric shock if your body is earthed or grounded.
ENF002-1
Power supply                          6.   Do not expose  power tools to rain or  wet
The tool should be connected only to a power supply of   conditions. Water  entering a  power tool  will
the  same voltage  as indicated on the nameplate,  and   increase the risk of electric shock.
can only be operated on single-phase AC supply. They   7.   Do not abuse the cord. Never use the cord for
are double-insulated in accordance with European   carrying, pulling or unplugging the power tool.
Standard and can, therefore, also be used from sockets   Keep cord away from heat, oil, sharp edges or
without earth wire.                      moving parts. Damaged or  entangled  cords
GEA004-1   increase the risk of electric shock.
8.   When operating a power tool outdoors, use an
GENERAL SAFETY RULES                     extension cord suitable for outdoor use. Use of
WARNING! Read all instructions. Failure to follow all   a cord suitable for outdoor use reduces the risk of
instructions listed below may result in electric shock, fire   electric shock.
and/or serious injury. The term "power tool" in all of the   Personal Safety
warnings listed below refers to your mains-operated   9.   Stay alert, watch what you are doing and use
(corded) power tool or battery-operated (cordless) power   common sense when operating a power tool.
tool.                                    Do not use a power tool while you are tired or
under the  influence of drugs, alcohol or
SAVE THESE INSTRUCTIONS.                 medication.  A  moment of inattention while
Work area safety                         operating power tools may result  in  serious
1.   Keep work area clean and well lit. Cluttered and   personal injury.
dark areas invite accidents.      10.  Use safety equipment.  Always  wear eye
2.   Do not operate power tools  in explosive   protection. Safety equipment such as dust mask,
atmospheres, such as  in the presence of   non-skid  safety shoes, hard hat,  or hearing
flammable liquids, gases or dust. Power tools   protection  used  for appropriate conditions will
create sparks which may ignite the dust or fumes.   reduce personal injuries.
3.   Keep children and bystanders away  while   11.  Avoid accidental starting. Ensure the switch is
operating a power tool. Distractions can cause   in the off-position before plugging in. Carrying
you to lose control.                 power tools with  your finger on the switch or
Electrical Safety                        plugging in power tools that have the switch on
4.   Power tool plugs must match the outlet. Never   invites accidents.
modify the plug in any  way. Do not use any   12.  Remove any adjusting key or  wrench before
adapter plugs with earthed (grounded) power   turning the power tool on. A wrench or a key left
tools. Unmodified plugs and matching outlets will   attached to a rotating part of the power tool may
reduce risk of electric shock.       result in personal injury.
2

13.  Do not overreach. Keep proper footing and   or binding of moving parts, breakage of parts
balance at all times. This enables better control   and any  other condition that  may  affect the
of the power tool in unexpected situations.   power tools operation. If damaged, have the
14.  Dress properly. Do not wear loose clothing or   power tool repaired before use. Many accidents
jewellery. Keep your hair, clothing, and gloves   are caused by poorly maintained power tools.
away from moving parts. Loose clothes,   21.  Keep cutting tools  sharp and clean. Properly
jewellery or long hair  can  be  caught in moving   maintained cutting tools with sharp cutting edges
parts.                               are less likely to bind and are easier to control.
15.  If devices are provided for the connection of   22.  Use the power tool, accessories and tool bits
dust extraction and collection facilities,   etc. in accordance with these instructions and
ensure these are connected and properly used.   in the manner intended for the particular type
Use of  these devices  can reduce  dust-related   of power tool, taking into account the working
hazards.                             conditions and the work to be performed. Use
Power tool use and care                  of the power tool  for operations different from
16.  Do not force the power tool. Use the correct   those intended could result in a hazardous
power tool for  your application. The  correct   situation.
power tool will do the job better and safer at the   SERVICE
rate for which it was designed.   23.  Have your power tool serviced by a qualified
17.  Do not use the power tool if the switch does   repair person using only identical replacement
not turn it on and off. Any power tool that cannot   parts. This will ensure that the safety of the power
be controlled  with the switch  is dangerous  and   tool is maintained.
must be repaired.                 24.  Follow  instruction  for  lubricating  and
18.  Disconnect the plug from the power source   changing accessories.
and/or the battery  pack  from the  power tool   25.  Keep handles dry, clean and free from oil and
before making any adjustments, changing   grease.
accessories, or  storing power  tools. Such   USE PROPER  EXTENSION CORD.  Make sure your
preventive safety measures reduce  the risk of   extension  cord is  in good condition.  When using an
starting the power tool accidentally.   extension cord,  be  sure  to use one  heavy enough to
19.  Store idle power tools out of the  reach of   carry the current your product will draw. An undersized
children and do not allow persons unfamiliar   cord will cause a drop in line voltage resulting in loss of
with the power  tool or these instructions to   power and overheating. Table 1 shows the correct size
operate the power  tool.  Power tools are   to use depending on cord length and nameplate ampere
dangerous in the hands of untrained users.   rating.  If in doubt, use  the next heavier gage. The
20.  Maintain power tools. Check for misalignment   smaller the gage number, the heavier the cord.
Table 1: Minimum gage for cord
Volts        Total length of cord in feet
Ampere Rating
120 V   25 ft.   50 ft.  100 ft.  150 ft.
More Than    Not More Than                    AWG
0              6                  18       16      16       14
6             10                  18       16      14       12
10             12                  16       16      14       12
12             16                  14       12    Not Recommended
000173
GEB007-2   1.   Wear ear  protectors. Exposure  to noise  can
cause hearing loss.
SPECIFIC SAFETY RULES                 2.   Use auxiliary handles  supplied  with the tool.
DO NOT let comfort or familiarity  with product   Loss of control can cause personal injury.
(gained from repeated use) replace strict adherence   3.   Hold power tools by insulated gripping
to rotary hammer safety rules. If  you use this tool   surfaces when performing an operation where
unsafely or incorrectly,  you can suffer serious   the cutting tool may contact hidden wiring or
personal injury.                         its own cord. Contact with a "live" wire will make
3