Перфоратор MAKITA HR2475. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Combination Hammer
Marteau combine
Martillo combinado
HR2475
010154
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
1

ENGLISH
SPECIFICATIONS
Model                               HR2475
Concrete                   25 mm  (1")
Core bit                 54 mm (2-1/8")
Capacities
Steel                    13 mm  (1/2")
Wood                     32 mm  (1-1/4")
No load speed (RPM)                   0 - 1,100/min.
Blows per minute                       0 - 4,500
Overall length                     429 mm (16-7/8")
Net weight                         3.0 kg ( 6.6 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
GEA008-1   7.   Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
General Power Tool Safety                Keep cord away from heat, oil, sharp edges or
Warnings                                 moving parts. Damaged or  entangled  cords
WARNING Read all safety  warnings and all   increase the risk of electric shock.
instructions. Failure  to  follow the warnings and   8.   When operating a power tool outdoors, use an
instructions may result in  electric shock,  fire and/or   extension cord suitable for outdoor use. Use of
serious injury.                          a cord suitable for outdoor use reduces the risk of
electric shock.
Save all warnings and                 9.   If operating a power tool in a damp location is
instructions for future reference.       unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
The  term "power  tool" in  the warnings refers  to your   GFCI reduces the risk of electric shock.
mains-operated (corded) power tool or battery-operated   Personal Safety
(cordless) power tool.                10.  Stay alert, watch what you are doing and use
Work area safety                         common sense when operating a power tool.
1.   Keep work area clean and well lit. Cluttered or   Do not use a power tool while you are tired or
dark areas invite accidents.         under the  influence of drugs, alcohol or
2.   Do not operate power tools  in explosive   medication.  A  moment of inattention while
atmospheres, such as  in the presence of   operating power tools may result  in  serious
flammable liquids, gases or dust. Power tools   personal injury.
create sparks which may ignite the dust or fumes.   11.  Use personal protective equipment.  Always
3.   Keep children and bystanders away  while   wear eye protection. Protective equipment such
operating a power tool. Distractions can cause   as dust mask, non-skid safety shoes, hard hat, or
you to lose control.                 hearing protection used for appropriate conditions
Electrical Safety                        will reduce personal injuries.
4.   Power tool plugs must match the outlet. Never   12.  Prevent unintentional starting. Ensure the
modify the plug in any  way. Do not use any   switch is in the off-position before connecting
adapter plugs with earthed (grounded) power   to power source and/or battery pack, picking
tools. Unmodified plugs and matching outlets will   up or carrying the tool. . Carrying  power tools
reduce risk of electric shock.       with your finger on the switch or energising power
5.   Avoid body contact with earthed or grounded   tools that have the switch on invites accidents.
surfaces such as pipes, radiators, ranges and   13.  Remove any adjusting key or  wrench before
refrigerators.  There is an increased risk of   turning the power tool on. A wrench or a key left
electric shock if your body is earthed or grounded.   attached to a rotating part of the power tool may
6.   Do not expose  power tools to rain or  wet   result in personal injury.
conditions. Water  entering a  power tool  will   14.  Do not overreach. Keep proper footing and
increase the risk of electric shock.   balance at all times. This enables better control
2

of the power tool in unexpected situations.   or binding of moving parts, breakage of parts
15.  Dress properly. Do not wear loose clothing or   and any  other condition that  may  affect the
jewellery. Keep your hair, clothing, and gloves   power tool’s operation. If damaged, have the
away from moving parts. Loose clothes,   power tool repaired before use. Many accidents
jewellery or long hair  can  be  caught in moving   are caused by poorly maintained power tools.
parts.                            22.  Keep cutting tools  sharp and clean. Properly
16.  If devices are provided for the connection of   maintained cutting tools with sharp cutting edges
dust extraction and collection facilities,   are less likely to bind and are easier to control.
ensure these are connected and properly used.   23.  Use the power tool, accessories and tool bits
Use  of dust collection can reduce  dust-related   etc. in  accordance  with these instructions,
hazards.                             taking  into account the  working  conditions
Power tool use and care                  and the work to be performed. Use of the power
17.  Do not force the power tool. Use the correct   tool for operations different from  those  intended
power tool for  your application. The  correct   could result in a hazardous situation.
power tool will do the job better and safer at the   SERVICE
rate for which it was designed.   24.  Have your power tool serviced by a qualified
18.  Do not use the power tool if the switch does   repair person using only identical replacement
not turn it on and off. Any power tool that cannot   parts. This will ensure that the safety of the power
be controlled  with the switch  is dangerous  and   tool is maintained.
must be repaired.                 25.  Follow  instruction  for  lubricating  and
19.  Disconnect the plug from the power source   changing accessories.
and/or the battery  pack  from the  power tool   26.  Keep handles dry, clean and free from oil and
before making any adjustments, changing   grease.
accessories, or  storing power  tools. Such   USE PROPER  EXTENSION CORD.  Make sure your
preventive safety measures reduce  the risk of   extension  cord is  in good condition.  When using an
starting the power tool accidentally.   extension cord,  be  sure  to use one  heavy enough to
20.  Store idle power tools out of the  reach of   carry the current your product will draw. An undersized
children and do not allow persons unfamiliar   cord will cause a drop in line voltage resulting in loss of
with the power  tool or these instructions to   power and overheating. Table 1 shows the correct size
operate the power  tool.  Power tools are   to use depending on cord length and nameplate ampere
dangerous in the hands of untrained users.   rating.  If in doubt, use  the next heavier gage. The
21.  Maintain power tools. Check for misalignment   smaller the gage number, the heavier the cord.
Table 1: Minimum gage for cord
Volts        Total length of cord in feet
Ampere Rating
120 V   25 ft.   50 ft.  100 ft.  150 ft.
More Than    Not More Than                    AWG
0              6                  18       16      16       14
6             10                  18       16      14       12
10             12                  16       16      14       12
12             16                  14       12    Not Recommended
000173
GEB007-6   1.   Wear ear  protectors. Exposure  to noise  can
cause hearing loss.
ROTARY HAMMER SAFETY                  2.   Use auxiliary handle(s), if  supplied  with the
WARNINGS                                 tool. Loss of control can cause personal injury.
DO NOT let comfort or familiarity  with product   3.   Hold power tool by insulated gripping
(gained from repeated use) replace strict adherence   surfaces, when performing an operation where
to safety rules for the subject product. If you use this   the cutting accessory may contact hidden
tool unsafely or incorrectly, you can suffer serious   wiring or  its own  cord. Cutting accessory
personal injury.                         contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
3