Аккумуляторный шуруповерт ударный MAKITA DHP459RFE. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Cordless Hammer Driver Drill
Perceuse Percussion-Visseuse sans
Fil
Rotomartillo Atornillador
Inalambrico
DHP459
012789
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.   1

ENGLISH (Original instructions)
SPECIFICATIONS
Model                               DHP459
Concrete                   13 mm  (1/2")
Steel                    13 mm  (1/2")
Capacities         Wood                     38 mm  (1-1/2")
Wood screw            6 mm x 75 mm (1/4" x 2-15/16")
Machine screw                M6 (1/4")
High (2)                 0 - 1,500 /min
No load speed (RPM)
Low (1)                   0 - 400 /min
High (2)                  0 - 22,500
Blows per minute
Low (1)                    0 - 6,000
Overall length                     192 mm (7-9/16")
Rated voltage                         D.C. 18 V
Battery cartridge          BL1815 / BL1815N   BL1830 / BL1840
Net weight                1.5kg (3.3 lbs)   1.7 kg (3.8 lbs)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2   5.   Avoid body contact with earthed or grounded
General Power Tool Safety                surfaces such as pipes, radiators, ranges and
refrigerators.  There is an increased risk of
Warnings                                 electric shock if your body is earthed or grounded.
WARNING Read all safety  warnings and all   6.   Do not expose  power tools to rain or  wet
instructions. Failure  to  follow the warnings and   conditions. Water  entering a  power tool  will
instructions may result in  electric shock,  fire and/or   increase the risk of electric shock.
serious injury.                       7.   Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Save all warnings and                    Keep cord away from heat, oil, sharp edges or
instructions for future reference.       moving parts. Damaged or entangled  cords
increase the risk of electric shock.
The  term "power  tool" in  the warnings refers  to your   8.   When operating a power tool outdoors, use an
mains-operated (corded) power tool or battery-operated   extension cord suitable for outdoor use. Use of
(cordless) power tool.                   a cord suitable for outdoor use reduces the risk of
Work area safety                         electric shock.
1.   Keep work area clean and well lit. Cluttered or   9.   If operating a power tool in a damp location is
dark areas invite accidents.         unavoidable, use a ground fault circuit
2.   Do not operate power tools  in explosive   interrupter (GFCI) protected supply. Use of an
atmospheres, such as  in the presence of   GFCI reduces the risk of electric shock.
flammable liquids, gases or dust. Power tools   Personal Safety
create sparks which may ignite the dust or fumes.   10.  Stay alert, watch what you are doing and use
3.   Keep children and bystanders away  while   common sense when operating a power tool. Do
operating a power tool. Distractions can cause   not use a power tool while you are tired or under
you to lose control.                 the influence of drugs, alcohol or medication. A
Electrical Safety                        moment of inattention while operating power tools
4.   Power tool plugs must match the outlet. Never   may result in serious personal injury.
modify the plug in any  way. Do not use any   11.  Use personal protective equipment.  Always
adapter plugs with earthed (grounded) power   wear eye protection. Protective equipment such
tools. Unmodified plugs and matching outlets will   as dust mask, non-skid safety shoes, hard hat, or
reduce risk of electric shock.       hearing protection used for appropriate conditions
will reduce personal injuries.
2

12.  Prevent unintentional starting. Ensure the   and the work to be performed. Use of the power
switch is in the off-position before connecting   tool for operations different from  those  intended
to power source and/or battery pack, picking   could result in a hazardous situation.
up or carrying the tool. Carrying power tools with   Battery tool use and care
your finger on the switch or energising power tools   24.  Recharge  only with  the charger  specified  by
that have the switch on invites accidents.   the manufacturer. A charger that is suitable for
13.  Remove any adjusting key or  wrench before   one type of battery pack may create a risk of fire
turning the power tool on. A wrench or a key left   when used with another battery pack.
attached to a rotating part of the power tool may   25.  Use power tools only  with specifically
result in personal injury.           designated battery  packs. Use of any other
14.  Do not overreach. Keep proper footing and   battery packs may create a risk of injury and fire.
balance at all times. This enables better control   26.  When battery pack is not in use, keep it away
of the power tool in unexpected situations.   from other metal objects,  like paper clips,
15.  Dress properly. Do not wear loose clothing or   coins, keys, nails, screws or other small metal
jewellery. Keep your hair, clothing, and gloves   objects, that can make a connection from one
away from moving parts. Loose  clothes,   terminal to another. Shorting  the battery
jewellery or long hair  can  be  caught in moving   terminals together may cause burns or a fire.
parts.                            27.  Under abusive  conditions, liquid may be
16.  If devices are provided for the connection of   ejected from the battery; avoid  contact.  If
dust extraction and collection facilities,   contact accidentally occurs, flush with water.
ensure these are connected and properly used.   If liquid contacts eyes, additionally seek
Use  of dust collection can reduce  dust-related   medical help. Liquid ejected from the battery may
hazards.                             cause irritation or burns.
Power tool use and care              Service
17.  Do not force the power tool. Use the correct   28.  Have your power tool serviced by a qualified
power tool  for  your application. The  correct   repair person using only identical replacement
power tool will do the job better and safer at the   parts. This will ensure that the safety of the power
rate for which it was designed.      tool is maintained.
18.  Do not use the power tool if the switch does   29.  Follow  instruction  for  lubricating  and
not turn it on and off. Any power tool that cannot   changing accessories.
be controlled  with the switch  is dangerous  and   30.  Keep handles dry, clean and free from oil and
must be repaired.                    grease.
19.  Disconnect the plug from the power source                      GEB056-5
and/or the  battery  pack  from the  power tool   CORDLESS HAMMER DRIVER
before making any adjustments, changing
accessories, or  storing power tools. Such   DRILL SAFETY WARNINGS
preventive safety measures reduce  the risk of   1.   Wear ear protectors  when  impact drilling.
starting the power tool accidentally.   Exposure to noise can cause hearing loss.
20.  Store idle power tools out of the  reach of   2.   Use auxiliary handle(s), if  supplied  with the
children and do not allow persons unfamiliar   tool. Loss of control can cause personal injury.
with the power  tool or these instructions to   3.   Hold power tool by insulated gripping
operate the power tool.  Power tools are   surfaces,  when performing an operation
dangerous in the hands of untrained users.   where the cutting accessory may  contact
21.  Maintain power tools. Check for misalignment   hidden wiring. Cutting accessory contacting a
or binding of moving parts, breakage of parts   "live" wire may make exposed metal parts of the
and any  other condition that  may  affect the   power tool "live" and could give the operator an
power tool’s operation. If damaged, have the   electric shock.
power tool repaired before use. Many accidents   4.   Hold power tool by insulated gripping
are caused by poorly maintained power tools.   surfaces,  when performing an operation
22.  Keep cutting tools  sharp and  clean. Properly   where the fastener may contact hidden wiring.
maintained cutting tools with sharp cutting edges   Fasteners contacting a  "live" wire may make
are less likely to bind and are easier to control.   exposed metal parts of the power tool "live" and
23.  Use the power tool, accessories and tool bits   could give the operator an electric shock.
etc. in  accordance  with these instructions,
taking  into account the  working  conditions
3