Аккумуляторная отвертка MAKITA DF010DSE. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
In-line Cordless Driver Drill
Visseuse-perceuse sans fil
rectiligne
Destornillador-taladro en serie a
bateria
DF010D
008706
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre securite, priere de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR REFERENCE ULTERIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
1

ENGLISH
SPECIFICATIONS
Model                               DF010D
Steel                    5 mm (1/5")
Wood                      6 mm (1/4")
Capacities
Wood screw           o3.8 mm x 45 mm (5/32" x 1-3/4")
Machine screw               M5 (3/16")
High (2)                   650/min.
No load speed (RPM)
Low (1)                    200/min.
Straight type              279 mm (11")
Overall length
Pistol type               224 mm (8-7/8")
Net weight                         0.55 kg (1.21lbs)
Rated voltage                        D.C. 7.2 V
Standard battery cartridge               BL7010
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
GEA002-3   Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or  entangled  cords
GENERAL SAFETY RULES                     increase the risk of electric shock.
WARNING! Read all instructions. Failure to follow all   8.   When operating a power tool outdoors, use an
instructions listed below may result in electric shock, fire   extension cord suitable for outdoor use. Use of
and/or serious injury. The term "power tool" in all of the   a cord suitable for outdoor use reduces the risk of
warnings listed below refers to your mains-operated   electric shock.
(corded) power tool or battery-operated (cordless) power   Personal Safety
tool.                                 9.   Stay alert, watch what you are doing and use
common sense when operating a power tool.
SAVE THESE INSTRUCTIONS.                 Do not use a power tool while you are tired or
Work area safety                         under the  influence of drugs, alcohol or
1.   Keep work area clean and well lit. Cluttered and   medication.  A  moment of inattention while
dark areas invite accidents.         operating power tools may result  in  serious
2.   Do not operate power tools  in explosive   personal injury.
atmospheres, such as  in the presence of   10.  Use safety equipment.  Always  wear eye
flammable liquids, gases or dust. Power tools   protection. Safety equipment such as dust mask,
create sparks which may ignite the dust or fumes.   non-skid  safety shoes, hard hat,  or hearing
3.   Keep children and bystanders away  while   protection  used  for appropriate conditions will
operating a power tool. Distractions can cause   reduce personal injuries.
you to lose control.              11.  Avoid accidental starting. Ensure the switch is
Electrical Safety                        in the off-position before plugging in. Carrying
4.   Power tool plugs must match the outlet. Never   power tools with  your finger on the switch or
modify the plug in any  way. Do not use any   plugging in power tools that have the switch on
adapter plugs with earthed (grounded) power   invites accidents.
tools. Unmodified plugs and matching outlets will   12.  Remove any adjusting key or  wrench before
reduce risk of electric shock.       turning the power tool on. A wrench or a key left
5.   Avoid body contact with earthed or grounded   attached to a rotating part of the power tool may
surfaces such as pipes, radiators, ranges and   result in personal injury.
refrigerators.  There is an increased risk of   13.  Do not overreach. Keep proper footing and
electric shock if your body is earthed or grounded.   balance at all times. This enables better control
6.   Do not expose  power tools to rain or  wet   of the power tool in unexpected situations.
conditions. Water  entering a  power tool  will   14.  Dress properly. Do not wear loose clothing or
increase the risk of electric shock.   jewellery. Keep your hair, clothing, and gloves
7.   Do not abuse the cord. Never use the cord for   away from moving parts. Loose clothes,
carrying, pulling or unplugging the power tool.   jewellery or long hair  can  be  caught in moving
2

parts.                            26.  When battery pack is not in use, keep it away
15.  If devices are provided for the connection of   from other metal objects like paper clips, coins,
dust extraction and collection facilities,   keys, nails, screws, or other  small metal
ensure these are connected and properly used.   objects that can make a connection from one
Use of  these devices  can reduce  dust-related   terminal to another. Shorting the battery
hazards.                             terminals together may cause burns or a fire.
Power tool use and care               27.  Under abusive  conditions, liquid may be
16.  Do not force the power tool. Use the correct   ejected from the battery, avoid contact. If
power tool for  your application. The  correct   contact accidentally occurs, flush with water. If
power tool will do the job better and safer at the   liquid contacts eyes, additionally seek medical
rate for which it was designed.      help. Liquid ejected from the battery may cause
17.  Do not use the power tool if the switch does   irritation or burns.
not turn it on and off. Any power tool that cannot   SERVICE
be controlled  with the switch  is dangerous  and   28.  Have your power tool serviced by a qualified
must be repaired.                    repair person using only identical replacement
18.  Disconnect the plug from the power source   parts. This will ensure that the safety of the power
and/or the battery  pack  from the  power tool   tool is maintained.
before making any adjustments, changing   29.  Follow  instruction  for  lubricating  and
accessories, or  storing power  tools. Such   changing accessories.
preventive safety measures reduce  the risk of   30.  Keep handles dry, clean and free from oil and
starting the power tool accidentally.   grease.
19.  Store idle power tools out of the  reach of                    GEB001-3
children and do not allow persons unfamiliar
with the power  tool or these instructions to   SPECIFIC SAFETY RULES
operate the power  tool.  Power tools are   DO NOT let comfort or familiarity  with product
dangerous in the hands of untrained users.   (gained from repeated use) replace strict adherence
20.  Maintain power tools. Check for misalignment   to drill safety rules. If  you use this power tool
or binding of moving parts, breakage of parts   unsafely or incorrectly,  you can suffer serious
and any  other condition that  may  affect the   personal injury.
power tools operation. If damaged, have the   1.   Wear ear protetors  with impact drills.
power tool repaired before use. Many accidents   Exposure to noise can cause hearing loss.
are caused by poorly maintained power tools.   2.   Use auxiliary handle(s), if  supplied  with the
21.  Keep cutting tools  sharp and clean. Properly   tool. Loss of control can cause personal injury.
maintained cutting tools with sharp cutting edges   3.   Hold power tool by insulated gripping
are less likely to bind and are easier to control.   surfaces when performing an operation where
22.  Use the power tool, accessories and tool bits   the cutting accessory  may contact hidden
etc. in accordance with these instructions and   wiring or  its own  cord. Cutting accessory
in the manner intended for the particular type   contacting   a    "live" wire may make exposed
of power tool, taking into account the working   metal parts of the power tool "live" and could give
conditions and the work to be performed. Use   the operator an electric shock.
of the power tool  for operations different from   4.   Always be sure you have a firm footing.
those intended could result in a hazardous   Be sure no one is below when using the tool in
situation.                           high locations.
Battery tool use and care             5.   Hold the tool firmly.
23.  Ensure the switch is in the off position before   6.   Keep hands away from rotating parts.
inserting battery pack. Inserting the battery pack   7.   Do not leave the tool running. Operate the tool
into power tools  that have the  switch on invites   only when hand-held.
accidents.                        8.   Do not touch the drill bit or the  workpiece
24.  Recharge only  with the  charger specified by   immediately after operation; they may be
the manufacturer. A charger that is suitable for   extremely hot and could burn your skin.
one type of battery pack may create a risk of fire   9.   Some material contains chemicals which may
when used with another battery pack.   be toxic. Take caution to prevent dust
25.  Use power tools only  with specifically   inhalation and skin contact. Follow  material
designated battery  packs. Use of any other   supplier safety data.
battery packs may create a risk of injury and fire.
3