Угловая аккумуляторная дрель-шуруповерт MAKITA DA330DWE. Инструкция на русском языке

INSTRUCTION MANUAL
Cordless Angle Drill
ENGLISH (Original instructions)
DA330D
DA331D
013258
IMPORTANT: Read Before Using.   1

ENGLISH (Original instructions)
SPECIFICATIONS
Model                      DA330D            DA331D
Steel            10 mm             10 mm
Capacities
Wood              12 mm             12 mm
-1
No load speed (min )           0 - 800           0 - 800
Overall length               298 mm            310 mm
Net weight                  1.1 kg             1.1 kg
Rated voltage               D.C. 10.8 V       D.C. 10.8 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4                              ENG900-1
Symbols                              Vibration
The following show the symbols used for the equipment.   The vibration  total value  (tri-axial vector  sum)
determined according to EN60745:
Be sure that you understand their meaning before use.
?  Read instruction manual.      Work mode: drilling into metal
2
Vibration emission (a h,D) : 2.5 m/s  or less
Cd   ?  Only for EU countries         Uncertainty (K) : 1.5 m/s 2
Ni-MH
Li-ion  Do not dispose of electric equipment or                  ENG901-1
battery pack together with household   •   The declared vibration emission value has been
waste material!                measured in accordance with the standard  test
In observance of  European Directive   method and may be used for comparing one tool
2002/96/EC on  waste electric and   with another.
electronic equipment, 2006/66/EC  on   •   The declared vibration emission value may also be
batteries and accumulators and waste   used in a preliminary assessment of exposure.
batteries and accumulators  and  their
implementation in accordance with   WARNING:
national  laws, electric equipment and   •   The vibration emission during actual use of  the
battery pack that have reached the end   power tool  can  differ from the declared emission
of their life must be collected separately   value depending on the ways in which the tool is
and  returned to an  environmentally   used.
compatible recycling facility.   •   Be sure to identify safety measures to protect the
ENE032-1   operator that  are  based on an  estimation  of
Intended use                             exposure in the actual conditions of use (taking
The tool is intended  for drilling in  wood, metal and   account of all parts of the operating cycle such as
plastic.                                 the times when the tool is switched off and when it
ENG905-1   is running idle in addition to the trigger time).
Noise
The typical  A-weighted noise level determined                     ENH101-16
according to EN60745:                For European countries only
Sound pressure level (L pA) : 70 dB(A) or less   EC Declaration of Conformity
Uncertainty (K) : 3 dB(A)         We  Makita  Corporation  as  the  responsible
The noise level under working may exceed 80 dB(A)   manufacturer declare that the following  Makita
machine(s):
Wear ear protection       Designation of Machine:
Cordless Angle Drill
Model No./ Type: DA330D, DA331D
are of series production and
Conforms to the following European Directives:
2006/42/EC
2

And are manufactured in accordance with the following   6.   Do not expose  power tools to rain or  wet
standards or standardised documents:     conditions. Water  entering a  power tool  will
EN60745                               increase the risk of electric shock.
The technical documentation is kept by:     7.   Do not abuse the cord. Never use the cord for
Makita International Europe Ltd.      carrying, pulling or unplugging the power tool.
Technical Department,                 Keep cord away from heat, oil, sharp edges or
Michigan Drive, Tongwell,             moving parts. Damaged or entangled cords
Milton Keynes, Bucks MK15 8JD, England   increase the risk of electric shock.
8.   When operating a power tool outdoors, use an
8.5.2012                   extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9.   If operating a power tool in a damp location is
000230
Tomoyasu Kato                unavoidable, use a ground fault circuit
Director                  interrupter (GFCI) protected supply. Use of an
Makita Corporation            GFCI reduces the risk of electric shock.
3-11-8, Sumiyoshi-cho,     Personal safety
Anjo, Aichi, 446-8502, JAPAN   10.  Stay alert, watch what you are doing and use
common sense when operating a power tool.
GEA006-2   Do not use a power tool while you are tired or
under the  influence of drugs, alcohol or
General Power Tool Safety                medication.  A  moment of inattention while
Warnings                                 operating power tools may result  in  serious
personal injury.
WARNING Read all safety  warnings and all   11.  Use personal protective equipment.  Always
instructions. Failure  to  follow the warnings and   wear eye protection. Protective equipment such
instructions may result in  electric shock,  fire and/or   as dust mask, non-skid safety shoes, hard hat, or
serious injury.
hearing protection used for appropriate conditions
Save all warnings and                    will reduce personal injuries.
instructions for future reference.    12.  Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
The  term "power  tool" in  the warnings refers  to your   to power source and/or battery pack, picking
mains-operated (corded) power tool or battery-operated   up or  carrying the tool. Carrying power tools
(cordless) power tool.                   with your finger on the switch or energising power
Work area safety                         tools that have the switch on invites accidents.
1.   Keep work area clean and well lit. Cluttered or   13.  Remove any adjusting key or  wrench before
dark areas invite accidents.         turning the power tool on. A wrench or a key
2.   Do not operate power tools  in explosive   left attached to a rotating part of  the  power tool
atmospheres, such as  in the presence of   may result in personal injury.
flammable liquids, gases or dust. Power tools   14.  Do not overreach. Keep proper footing and
create sparks which may ignite the dust or fumes.   balance at all times. This enables better control
3.   Keep children and bystanders away  while   of the power tool in unexpected situations.
operating a power tool. Distractions can cause   15.  Dress properly. Do not wear loose clothing or
you to lose control.                 jewellery. Keep your hair, clothing, and gloves
Electrical safety                        away from moving parts. Loose  clothes,
4.   Power tool plugs must match the outlet. Never   jewellery or long hair  can  be  caught in moving
modify the plug in any  way. Do not use any   parts.
adapter plugs with earthed (grounded) power   16.  If devices are provided for the connection of
tools. Unmodified plugs and matching outlets will   dust extraction and collection facilities,
reduce risk of electric shock.       ensure  these are connected and properly
5.   Avoid body contact with earthed or grounded   used. Use of dust collection  can  reduce dust-
surfaces such as pipes, radiators, ranges and   related hazards.
refrigerators.  There is an increased risk of
electric shock if your body is earthed or grounded.
3