Пила циркулярная MAKITA 5477 NB. Инструкция на русском языке

INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Hypoid Saw
Scie hypoide
Sierra Circular
5477NB
009223
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre securite, priere de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR REFERENCE ULTERIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
1

ENGLISH
SPECIFICATIONS
Model                               5477NB
Blade diameter                      185 mm (7-1/4")
at 90°                   60 mm (2-3/8")
Max. Cutting depth   at 45°                   44 mm (1-3/4")
at 50°                   40 mm (1-9/16")
No load speed (RPM)                    4,500/min.
Overall length                      442 mm (17-3/8")
Net weight                         6.3 kg (13.9 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
GEA008-1   7.   Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
General Power Tool Safety                Keep cord away from heat, oil, sharp edges or
Warnings                                 moving parts. Damaged or  entangled  cords
WARNING Read all safety  warnings and all   increase the risk of electric shock.
instructions. Failure  to  follow the warnings and   8.   When operating a power tool outdoors, use an
instructions may result in  electric shock,  fire and/or   extension cord suitable for outdoor use. Use of
serious injury.                          a cord suitable for outdoor use reduces the risk of
electric shock.
Save all warnings and                 9.   If operating a power tool in a damp location is
instructions for future reference.       unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
The  term "power  tool" in  the warnings refers  to your   GFCI reduces the risk of electric shock.
mains-operated (corded) power tool or battery-operated   Personal Safety
(cordless) power tool.                10.  Stay alert, watch what you are doing and use
Work area safety                         common sense when operating a power tool.
1.   Keep work area clean and well lit. Cluttered or   Do not use a power tool while you are tired or
dark areas invite accidents.         under the  influence of drugs, alcohol or
2.   Do not operate power tools  in explosive   medication.  A  moment of inattention while
atmospheres, such as  in the presence of   operating power tools may result  in  serious
flammable liquids, gases or dust. Power tools   personal injury.
create sparks which may ignite the dust or fumes.   11.  Use personal protective equipment.  Always
3.   Keep children and bystanders away  while   wear eye protection. Protective equipment such
operating a power tool. Distractions can cause   as dust mask, non-skid safety shoes, hard hat, or
you to lose control.                 hearing protection used for appropriate conditions
Electrical Safety                        will reduce personal injuries.
4.   Power tool plugs must match the outlet. Never   12.  Prevent unintentional starting. Ensure the
modify the plug in any  way. Do not use any   switch is in the off-position before connecting
adapter plugs with earthed (grounded) power   to power source and/or battery pack, picking
tools. Unmodified plugs and matching outlets will   up or carrying the tool. . Carrying  power tools
reduce risk of electric shock.       with your finger on the switch or energising power
5.   Avoid body contact with earthed or grounded   tools that have the switch on invites accidents.
surfaces such as pipes, radiators, ranges and   13.  Remove any adjusting key or  wrench before
refrigerators.  There is an increased risk of   turning the power tool on. A wrench or a key left
electric shock if your body is earthed or grounded.   attached to a rotating part of the power tool may
6.   Do not expose  power tools to rain or  wet   result in personal injury.
conditions. Water  entering a  power tool  will   14.  Do not overreach. Keep proper footing and
increase the risk of electric shock.   balance at all times. This enables better control
of the power tool in unexpected situations.
2

15.  Dress properly. Do not wear loose clothing or   21.  Maintain power tools. Check for misalignment
jewellery. Keep your hair, clothing, and gloves   or binding of moving parts, breakage of parts
away from moving parts. Loose clothes,   and any  other condition that  may  affect the
jewellery or long hair  can  be  caught in moving   power tool’s operation. If damaged, have the
parts.                               power tool repaired before use. Many accidents
16.  If devices are provided for the connection of   are caused by poorly maintained power tools.
dust extraction and collection facilities,   22.  Keep cutting tools  sharp and clean. Properly
ensure these are connected and properly used.   maintained cutting tools with sharp cutting edges
Use  of dust collection can reduce  dust-related   are less likely to bind and are easier to control.
hazards.                          23.  Use the power tool, accessories and tool bits
Power tool use and care                  etc. in  accordance  with these instructions,
17.  Do not force the power tool. Use the correct   taking  into account the  working  conditions
power tool for  your application. The  correct   and the work to be performed. Use of the power
power tool will do the job better and safer at the   tool for operations different from  those  intended
rate for which it was designed.      could result in a hazardous situation.
18.  Do not use the power tool if the switch does   SERVICE
not turn it on and off. Any power tool that cannot   24.  Have your power tool serviced by a qualified
be controlled  with the switch  is dangerous  and   repair person using only identical replacement
must be repaired.                    parts. This will ensure that the safety of the power
19.  Disconnect the plug from the power source   tool is maintained.
and/or the battery  pack  from the  power tool   25.  Follow  instruction  for  lubricating  and
before making any adjustments, changing   changing accessories.
accessories, or  storing power  tools. Such   26.  Keep handles dry, clean and free from oil and
preventive safety measures reduce  the risk of   grease.
starting the power tool accidentally.   USE PROPER  EXTENSION CORD.  Make sure your
20.  Store idle power tools out of the  reach of   extension  cord is  in good condition.  When using an
children and do not allow persons unfamiliar   extension cord,  be  sure  to use one  heavy enough to
with the power  tool or these instructions to   carry the current your product will draw. An undersized
operate the power  tool.  Power tools are   cord will cause a drop in line voltage resulting in loss of
dangerous in the hands of untrained users.   power and overheating. Table 1 shows the correct size
to use depending on cord length and nameplate ampere
rating.  If in doubt, use  the next heavier gage. The
smaller the gage number, the heavier the cord.
Table 1: Minimum gage for cord
Volts        Total length of cord in feet
Ampere Rating
120 V   25 ft.   50 ft.  100 ft.  150 ft.
More Than    Not More Than                    AWG
0              6                  18       16      16       14
6             10                  18       16      14       12
10             12                  16       16      14       12
12             16                  14       12    Not Recommended
000173
GEB013-2     DANGER:
1.   Keep hands away from cutting area and the
SPECIFIC SAFETY RULES                    blade. Keep  your second hand on auxiliary
DO NOT let comfort or familiarity  with product   handle, or motor housing. If both  hands  are
(gained from repeated use) replace strict adherence   holding the saw, they cannot be cut by the blade.
to circular saw  safety rules. If  you  use this  tool   2.   Do not reach underneath the workpiece. The
unsafely or incorrectly,  you can suffer serious   guard cannot protect you from the blade below the
personal injury.                         workpiece.
3