Микроскоп OLYMPUS IX2-ARCEVA. Инструкция на английском языке

INSTRUCTIONS
IX2-ARCEVA
ARC ILLUMINATION TIRF SET
This instruction manual is for the Olympus Arc Illumination TIRF Set. To ensure the safety, obtain
optimum performance and to familiarize yourself fully with the use of this system, we recommend that
you study this manual thoroughly before operating the system.
As this system employs an arc light source (mercury burner or xenon burner), take special care for safety
and please also read the instruction manual for the light source.
Retain this instruction manual in an easily accessible place near the work desk for future reference.
A X 7 3 8 7

Printed on 100% recycled paper with soy ink.

2
3
1
5
4
4-1
4-2
1
2
ASSEMBLY
CONTROLS
OPERATION
Preparation
NOMENCLATURE
CONTENTS
Adjusting the Slit
Centering the Burner
TROUBLESHOOTING GUIDE
Total Reflection Fluorescence Observation
instruction manuals are available, refer to their instruction manuals.
IMPORTANT — Be sure to read this section for safe use of the equipment. —
....................................................................................................................
1-4
5
6-7
14
15
..............................................................................................................................................................................................................  12-13
8-11
12-14
Correct assembly and adjustments are critical for the system to manifest its full performance. If you are going to assemble
the system by yourself, please read chapter 3, “ASSEMBLY” (pages. 8 to 11). For the assemblies of the modules for which
IX2-ARCEVA