Микроскоп OLYMPUS BX61WI. Инструкция на английском языке

INSTRUCTIONS
BX61WI
FIXED-STAGE MOTORIZED
UPRIGHT MICROSCOPE
This instruction manual is for the Olympus Fixed-Stage Motorized Upright Microscope Model BX61WI.
To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this
microscope, we recommend that you study this manual thoroughly before operating the microscope.
Retain this instruction manual in an easily accessible place near the work desk for future reference.
A X 6 1 1 8

This device complies with the requirements of directive 98/79/EC concerning in vitro diag-
nostic medical devices. CE marking means the conformity to the directive.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

BX61WI
CONTENTS
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to
assemble the microscope yourself, please read Chapter 9, “ASSEMBLY” (pages 42 to 49) carefully. For the modules
provided with instruction manuals, also read the assembly procedures in their instruction manuals.
IMPORTANT  — Be sure to read this section for safe use of the equipment. —         1-3
1     MODULE NOMENCLATURE                                                            4
2     CONTROLS                                                                    5-11
3     TRANSMITTED LIGHT BRIGHTFIELD OBSERVATION PROCEDURE                       12, 13
4     USING THE CONTROLS                                                        14-23
4-1  Microscope Frame .................................................................................................................................................................. 14, 15
1  Voltage Indication             2 Transmitted/Reflected Light Switch
3  Light Preset Switch            4 Using the Filter Turret
4-2  Focusing Block............................................................................................................................................................................. 15, 16
1  Replacing the Focus Adjustment Knob  2 F/C Button
3  Objective Up/Down Buttons      4 Objective Escape/Return Button
5  Using the Frost Filter Insertion/Removal Lever
4-3  Stage (IX-SVL2) ..............................................................................................................................................................................  17, 18
1  Placing the Specimen           2 Moving the Specimen
3  Setting the Grounding          4 Adjusting the X-Axis/Y-Axis Knob Rotation Tension
5  Using the Light Shielding Sheet  6 Lowering the Stage Height
4-4  Revolving Nosepiece ....................................................................................................................................................................  18
1  Switching the Objectives
4-5  Observation Tube .................................................................................................................................................................... 19, 20
1  Adjusting the Interpupillary Distance  2 Adjusting the Diopter
3  Using the Eye Shades           4 Using Eyepiece Micrometer Disks
5  Selecting the Light Path of Trinocular Tube
4-6  Condenser ........................................................................................................................................................................................  21 ,22
1  Centering the Condenser        2 Oblique Illumination (WI-OBCD)
4-7  Water Immersion Objectives.............................................................................................................................................. 23
1  Using Water Immersion Objectives (Water Immersion Cap)