Динамик НЧ MOREL Titanium Former Woofer TICW 634ND. Инструкция на английском языке

NEW
INSERT PICTURE
TiCW 634Nd
6" BASSMID. 4 ohm
Coppersleeve Neolin   Motor
TM
Titanium coil bobbin
SPECIFICATIONS
General Data                                                  FEATURES
Overall Dimensions         DxH  160mm (6.3") x 69mm (2.71")   * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN)  P  150W                         * Hybrid™ Neodymium/Ferrite magnet system
Transient Power 10ms            1000W                         * Titanium coil bobbin
Sensitivity 2.83V / 1M          88dB                          * 3" Large Hexatech™ Aluminum voice coil
Frequency Response              See graph                     * Coppersleeve Neolin   Motor
TM
Cone Material                   injected Damped Polymer Composite  * High power handling
Net Weight                 Kg   1.10 Kg                       * High Xmax, Low Qts, Low Fs, High QMS
Electrical Data                                               Unit Dimentions
Nominal Impedance          Z    4?
DC Resistance              Re   3.7?
Voice Coil Inductance @ 1KHz  LBM  0.29 mH
Voice Coil and Magnet Parameters
Voice Coil Diameter        DIA  75 mm (3")
Voice Coil Height               16 mm (0.62")
HE Magnetic Gap Height     HE   5 mm (0.20")
Max. Linear Excursion      X    ± 5.5mm
Voice Coil bobbin               Titanium
Voice Coil Wire                 Hexatech™ Aluminum
Voice Coil Wire
Hexatech™ Aluminum
Number Of Layers                2
Magnet System Type              Hybrid™ Neodymium/Ferrite
B Flux Density             B    0.78 T
BL Product                 BXL  6.6 T.m
T-S Parameters                   Small Signal      1 V
Suspension Compliance      Cms  0.988 mm/N     1.302 mm/N     A - Overall diameter           160mm
Mechanical Q Factor        Qms  4.98           3.4            B - Cut out diameter           140mm
Electrical Q Factor        Qes  0.37           0.31           C - Flange thickness               6mm
Total Q Factor             Qts  0.35           0.29           D - Overall height              69mm
Mechanical Resistance      Rms  0.904?m        1.052 ?m       E - Basket + magnet depth       63mm
Moving Mass                Mms  17.7 gr        17.7 gr        F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)  VAS  17.3 Lt        25.50 Lt       G - 6 Mounting holes, at 60? interval,
Resonant Frequency         Fs   40 Hz          34 Hz                inner hole diameter     O 4.2mm
Effective Piston Area      SD   119 cm ?       119 cm ?
0?
30?
45?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.