Генератор тумана CHAUVET-DJ Hurricane Haze 2D. Инструкция на русском языке

Quick Reference Guide

Hurricane™ Haze 2D QRG                                                 EN
About This    The Hurricane™ Haze 2D Quick Reference Guide (QRG) has basic product
Guide   information such as mounting, menu options, and DMX values. Download
the User Manual from www.chauvetlighting.com for more details.
Disclaimer   The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important information about installation, use,
Safety Notes
and maintenance.
•  This product is not intended for permanent installation.
•  ONLY connect this product to a grounded and protected circuit.
•  Always disconnect from power before cleaning or replacing the fuse.
•  Make sure the power cord is not crimped or damaged.
•  Never disconnect this product from power by pulling on the cord.
•  DO NOT touch this product when it is operating because it may be hot.
•  Always disconnect this product from the power source before cleaning it
or replacing the fuse.
•  Do not touch the output nozzle on this product. It is very hot during
operation and it may remain hot for several hours after turning the unit
off.
•  Depending on the amount of fog/haze generated, all fog machines may
set off smoke detectors.
•  The voltage of the outlet to which you are connecting this product must
be within the range stated on the decal or rear panel of the product.
•  Always mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
•  Be sure that no ventilation slots on the unit’s housing are blocked.
•  Replace the fuse with the same type and rating.
•  ONLY use the mounting bracket to carry this product.
•  The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
•  In the event of a serious operating problem, stop using immediately.
•  DO NOT open this product. It contains no user-serviceable parts.
•  Do not use for space heating purposes.
Contact   Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit  www.chauvetlighting.com  for
contact information.
What Is   •  Hurricane™ Haze 2D       •  Warranty Card
Included   •  Power Cord               •  Quick Reference Guide
•  Wired Remote
2

EN                                                Hurricane™ Haze 2D QRG
To Begin    Unpack your Hurricane™ Haze 2D and make sure you have received all
parts in good condition. If the box or contents appear damaged, notify the
carrier immediately, not CHAUVET®.
Product    The Hurricane™ Haze 2D is a water-based haze machine with continuous
Description    output and a digital display to set DMX and standalone functions with ease.
It features adjustable blower output speeds and nozzle to get the haze where
you need it. An included wired, timer remote stores conveniently in the
fixture.
DMX
LED Display   In/Out   Mounting Bracket
Bracket
Fluid Level      Adjustment
Knob
Indicator
Product Overview
Remote Out
Power In
Fuse Holder
Back Panel View    Access
Panel         Side View
FCQ (Fog Cleaner Quart) was specifically developed by CHAUVET®
to clean your Hurricane™ Haze 2D. Make sure you use FCQ regularly
to increase the life of your product.
AC Power     This product has a fixed voltage power supply and it can work with an
input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the
specific model.
Fuse Replacement  1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
3