MD-рекордер TASCAM MD-CD1 MKIII. Инструкция на английском языке

»                               MD-CD1 Quick Start Guide
Selecting the remote control                   Dubbing from CD to MD
master
The great advantage of the MD-CD1 is that you can
At the top of the remote control unit, there is a  make dubbing from CD to MD easily.
CD/MD switch used to select the deck to be     Here's how to make dubbing.
controlled by the shared keys on the upper portion of
the remote control unit.                       Preparations
The selected deck is called "remote control master".
Load the CD to be used as the dubbing source into
the CD deck, then insert a recordable MiniDisc into
the MD deck.
CD/MD switch
To dub the entire CD
While the CD deck is stopped, press the
Shared keys
DUBBING key on either the front panel or the
remote control.
Dubbing starts.
DUBBING Key
Selecting the display master
You can select the display master using the CD or
MD key.
The display represents the information of the display
master deck. The CD or MD indicator lights up to
show the selection.
CD key and    MD key and
CD indicator  MD indicator
DUBBING Key
NOTE
By default, recording is performed in the standard
stereo recording mode while dubbling speed is 4x
speed. You can change the recording mode or
dubbing speed via the menu mode.
1

To dub a selected track on the CD
1 Select the desired track by using the skip keys
or numeric keys, and start playback by
pressing the PLAY key or enter the playback
standby by pressing the READY key.
NOTE                                               INPUT SEL Key
The selected CD track number is shown on the
top left of the display while the display master is
set to CD.
Track number
The current selection is shown on the right of the
display.
Input source
2 Press the DUBBING key on either the front
panel or the remote control.
When the track is finished dubbing, both decks
will stop.
Input monitoring
Recording an external source                   Press the RECORD key on either the front panel or
the remote control.
The MD-CD1 can not only dub from CD to MD, it  The MD deck will enter recording standby mode, the
also allows MD recording from external sound   READY and RECORD indicators will light up.
sources.                                       The MD input signal can be monitored through
headphones or a connected audio system.
Preparations
• Connect an external sound source to the      Monitoring
appropriate connector(s) (ANALOG INPUT or
By   connecting    your   monitor   system
DIGITAL (OPTICAL) INPUT on the rear panel
(amplifier/speakers) to the COMMON  OUTPUT
of the unit).
connectors, you can monitor either of the CD and
• Insert a recordable MiniDisc to the deck.
MD decks.
• Make sure that the deck is in stop mode.
NOTE
Input source selection                         If you wish to monitor the CD and MD decks
independently, use the CD OUTPUT and MD
Use the INPUT SEL key on the front panel or the  OUTPUT connectors.
remote control to select the input source between
ANALOG and OPTICAL.
2

Recording level adjustment                      Menu
If neccessary, adjust the recording level while
The various settings and editing operations possible
monitoring the input and viewing the meters on the
with the MD-CD1 are performed through menu
display.
items shown on the display. Among the many menu
Use the "REC VOLUME?" option on the VOL
setting items, some may be made directly using the
FUNC sub-menu of the MD menu to adjust the
keys on the remote control.
level.
If ANALOG is selected as the input source, you may
Menu configuration
also use the front panel INPUT controls (L and R)to
set the level independently for each channel.  There are CD menu and MD menu. Each menu
consists of some sub-menus as shown below. Each
INPUT controls  sub-menu has some items.
CD menu
CD PLAY sub-menu for CD playback
CD VOL FUNC sub-menu for volume functions
SERIAL sub-menu for RS-232C settings
SYSTEM sub-menu for the unit
MD menu
MD PLAY sub-menu for MD playback
Starting recording
MD VOL FUNC sub-menu for recording level
In the recording standby mode, press the PLAY key,  REC sub-menu for MD recording
and recording will start.                        EDIT sub-menu for MD editing functions
To stop recording, press the STOP key.           TITLE sub-menu for MD title editing functions
After pressing the STOP key, "UTOC Writing" will
be shown on the display as the User Table Of
Menu operation
Contents is written on the disc.
To pause recording, press the READY key.       Here's how to make menu setting using the front
panel controls.
Advanced recording functions                   1 Press the CD MENU key or the MD MENU
To enter a track number manually                 key to call up the desired menu.
During recording, press the RECORD key at the
point where you wish to begin a new track.                 CD MENU key  MD MENU key
CD indicator         MD indicator
To enter track numbers automatically
Use the "AUTO TRACK" key to select "-XXdB" (a
track number is added when a silent part is detected
in the source) or "D-D" (track numbers are added in
accordance with the digital source track numbers).
To fade-in or fade-out recording                 NOTE
In recording standby mode, press the FADER key to  In Menu mode, the CD or MD indicators flash to
fade-in recording.                               indicate which menu is called up.
During recording, press the FADER key to fade-out
the sound.
3