Конвертер M-AUDIO CO3. Инструкция на английском языке

CO3 Manual
version: CO3-111201
Table of Contents
Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Panel Description   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Front Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Back Panel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Basic Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installation and Setup   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Advanced Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SCMS Modes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SCMS "Pass-Thru" Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SCMS "None" Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
SCMS "Original" Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
SCMS "1st Generation" Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Input Source Modes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Coaxial or TOSlink (optical) S/PDIF Input Modes   . . . . . . . . . . . . . . . .7
AES/EBU Input Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Mode Summary   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Limited Lifetime Warranty   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Introduction
Thank you for purchasing the CO3™ Digital Audio Format Converter from
M Audio.  The CO3™ converts between AES/EBU, S/PDIF Optical, and
Coaxial S/PDIF digital formats.  A precision instrument, the CO3 does more
than just convert an unbalanced signal to balanced and vice versa.  The CO3
gives you several options to manage the copy protection bits present in
S/PDIF signals as well as creating the SCMS (Serial Copy Management
System) bits required when converting AES/EBU to S/PDIF.  Feel confident
in the integrity of your digital format conversions with your CO3™       from
M Audio.
Features
• Converts between 3 digital audio formats: AES/EBU, Coaxial S/PDIF, and
TOSlink optical.
• Converts to ALL 3 outputs simultaneously while allowing original signal
to pass through.
• Front panel SCMS button selects between copy protection modes: no copy
protection, pass-thru, force "original", and force "1st generation."
• Built-in jitter correction.
• All 3 digital audio input and output ports on rear panel, allowing for easy
hook-up.
• One-third rack sized chassis.  9v DC wall wart power adapter.
Panel Description
Front Panel
Coaxial  Optical  AES/EBU Converter    TM
Original
S/PDIF              Pass-Thru
Source Valid
TOSlink  AES/EBU        None   1st Gen
SOURCE     SCMS          POWER    ?
AUDIO  T
?     ?
?        ? ?
Back Panel
IN              OUT
9 VDC  TOSlink  S/PDIF  AES/EBU  TOSlink  S/PDIF  AES/EBU
?
?                ?
2

Front Panel
1.  Source selection LEDs.  These LEDs indicate which one of the three input
jacks is selected as the source of incoming digital audio.  Only one of the
LEDs is lit at a time.
2.  Source selection button.  This pushbutton selects one of the three input
jacks to be the source of incoming digital audio.  Repeatedly pressing this
button will cycle through the three available selections.
3.  Source Valid LED.  This LED indicates the state of the currently selected
source input.  When lit, the LED indicates the input data is recognizable
and has valid format.  When not lit, the LED indicates invalid or no data
at the selected input.
4.  SCMS Mode Select button. Repeatedly pressing this button will cycle
through the four SCMS mode selections.  Some SCMS modes may not be
available, depending on which input format is currently selected as the
source.
5.  SCMS Mode selection LEDs. These LEDs indicate which one of the four
of the SCMS modes is selected. Only one of the LEDs is lit at a time.
6.  Power button.  Pressing this button to the "in" position will turn the CO3
on.  Pressing and releasing to the "out" position will turn the CO3 off.
Back Panel
1. 9V DC input jack.  The CO3’s power adapter plugs in here.
2. Digital Audio Input jacks.  These jacks accept three different formats of
digital audio data input.  Whichever jack is selected as the CO3’s source
will be converted to one or more of the available output formats.
3.  Digital Audio Output jacks.  These jacks output converted data from the
CO3, in the three  formats supported by the CO3.
Basic Operation
The CO3 Digital Audio Format Converter has three digital audio inputs:
1.  Optical S/PDIF, labeled "TOSlink," is input via the TOSlink connector.
This is the default setting when the CO3 powers up.
2.  Coaxial S/PDIF, labeled "S/PDIF," is input via the RCA jack.
3.  AES/EBU, labeled "AES/EBU," is input via the female XLR jack.
Only one of the inputs to the CO3 is active at any time and the user selects
this input, called the "Source" input, from the front panel.  Once selected as
the source, the input is constantly analyzed by the CO3 to determine if its
digital audio stream is present and has a valid format.  The status of this
input is displayed by the CO3’s "Source Valid" LED.
3