Директ бокс ALTO Di1. Инструкция на английском языке

User's Manual
DI1                                              DIRECT BOX
www.altoproaudio.com
Version 2.4 September 2005
English

SAFETY RELATED SYMBOLS                  result in damage to the product and
possibly the user.
Unplug the product before electrical storms
CAUTION
occur and when unused for long periods of
RISK OF ELECTRIC SHOCK
DO NOT OPEN
time to reduce the risk of electric shock or
fire.
This symbol, wherever used, alerts
you to the presence of un-insulated
External Connection
and dangerous voltages within the
Always use proper ready-made insulated
product enclosure. These are voltages
mains cabling (power cord). Failure to do
that may be sufficient to constitute the
so could result in shock/death or fire. If
risk of electric shock or death.
in doubt, seek advice, from a registered
This symbol, wherever used, alerts  electrician.
you to important operating and ma-
Do not Remove any Covers
intenance instructions. Please read.
Protective Ground Terminal        Within the product are areas where high
AC mains (Alternating Current)    voltages may present. To reduce the risk
Hazardous Live Terminal           of electric shock do not remove any
covers unless the AC mains power cord
ON: Denotes the product is turned on.  is removed.
OFF:Denotes the product is turned off.  Covers should be removed by qualified
service personnel only.
WARNING                               No user serviceable parts inside.
Describes precautions that should be
observed to prevent the possibility of  Fuse
death or injury to the user.          To prevent fire and damage to the
product, use only the recommended
CAUTION                               fuse type as indicated in this manual.
Describes precautions that should be  Do not short-circuit the fuse holder.
observed to prevent damage to the     Before replacing the fuse, make sure
product.                              that the product is OFF and disconnected
from the AC outlet.
Disposing of this product should
not be placed in municipal waste  Protective Ground
and should be separate collection.  Before turning the product ON, make sure
that it is connected to Ground. This is to
prevent the risk of electric shock.
WARNING
Never cut internal or external Ground wires.
Power Supply
Likewise, never remove Ground wiring
Ensure that the mains source voltage  from the Protective Ground Terminal.
(AC outlet) matches the voltage rating
of the product. Failure to do so could
1 1

Operating Conditions                 Servicing
Always install in accordance with the  Refer all servicing to qualified service
manufacturer's instructions.         personnel only.
To avoid the risk of electric shock and  Do not perform any servicing other than
damage, do not subject this product to  those instructions contained within the
any liquid/rain or moisture. Do not use this  User's Manual.
product when in close proximity to water.
Do not install this product near any direct
heat source.
Do not block areas of ventilation. Failure
to do so could result in fire.
Keep product away from naked flames.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions
Follow all instructions
Keep these instructions. Do not discard.
Heed all warnings.
Only use attachments/accessories
specified by the manufacturer.
Power Cord and Plug
Do not tamper with the power cord or plug.
These are designed for your safety.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek
advice from a qualified electrician.
Protect the power cord and plug from any
physical stress to avoid risk of electric shock.
Do not place heavy objects on the power
cord. This could cause electric shock or fire.
Cleaning
When required, either blow off dust from
the product or use a dry cloth.
Do not use any solvents such as Benzol
or Alcohol.
For safety, keep product clean and free
from dust.
2