На сайте 124107 инструкций общим размером 502.41 Гб , которые состоят из 6273535 страниц
Руководство пользователя RYOBI ROS300 (3001144). Основные функции, характеристики и условия эксплуатации изложены на 10 страницах документа в pdf формате.
Доступно к просмотру 10 страниц. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
ORIGINAL INSTRUCTIONS Random Orbital Sander ROS300
Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modi? cations.
Safety serious personal injury. GENERAL POWER TOOL SAFETY WARNINGS ¦ Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING mask, non-skid safety shoes, hard hat, or hearing Read all safety warnings and all instructions. Failure protection used for appropriate conditions will reduce to follow the warnings and instructions may result in personal injuries. electric shock, ? re and/or serious injury. ¦ Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying Save all warnings and instructions for future reference. the tool. Carrying power tools with your finger on the The term “power tool’’ in the warnings refers to your switch or energising power tools that have the switch mains-operated (corded) power tool or battery-operated on invites accidents. (cordless) power tool. ¦ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to WORK AREA SAFETY a rotating part of the power tool may result in personal ¦ Keep work area clean and well lit. Cluttered or dark injury. areas invite accidents. ¦ Do not overreach. Keep proper footing and balance ¦ Do not operate power tools in explosive at all times. This enables better control of the power atmospheres, such as in the presence of flammable tool in unexpected situations. liquids, gases, or dust. Power tools create sparks ¦ Dress properly. Do not wear loose clothing or which may ignite the dust or fumes. jewellery. Keep your hair, clothing and gloves away ¦ Keep children and bystanders away while operating from moving parts. Loose clothes, jewellery or long a power tool. Distractions can cause you to lose hair can be caught in moving parts. control. ¦ If devices are provided for the connection of dust ELECTRICAL SAFETY extraction and collection facilities, ensure these are connected and properly used. Use of dust collection ¦ Power tool plugs must match the outlet. Never can reduce dust-related hazards. modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools. POWER TOOL USE AND CARE Unmodified plugs and matching outlets will reduce risk ¦ Do not force the power tool. Use the correct power of electric shock. tool for your application. The correct power tool will ¦ Avoid body contact with earthed or grounded do the job better and safer at the rate for which it was surfaces such as pipes, radiators, ranges and designed. refrigerators. There is an increased risk of electric ¦ Do not use the power tool if the switch does not turn shock if your body is earthed or grounded. it on and off. Any power tool that cannot be controlled ¦ Do not expose power tools to rain or wet conditions. with the switch is dangerous and must be repaired. Water entering a power tool will increase the risk of ¦ Disconnect the plug from the power source and/or electric shock. the battery pack from the power tool before making ¦ Do not abuse the cord. Never use the cord for any adjustments, changing accessories, or storing carrying, pulling or unplugging the power tool. power tools. Such preventive safety measures reduce Keep cord away from heat, oil, sharp edges or the risk of starting the power tool accidentally. moving parts. Damaged or entangled cords increase ¦ Store idle power tools out of the reach of children the risk of electric shock. and do not allow persons unfamiliar with the power ¦ When operating a power tool outdoors, use an tool or these instructions to operate the power tool. extension cord suitable for outdoor use. Use of a Power tools are dangerous in the hands of untrained cord suitable for outdoor use reduces the risk of electric users. shock. ¦ Maintain power tools. Check for misalignment or ¦ If operating power tools in a damp location is binding of moving parts, breakage of parts and unavoidable, use a residual current device (RCD) any other condition that may affect the power tools protected supply. Use of an RCD reduces the risk of operation. If damaged, have the power tool repaired electric shock. before use. Many accidents are caused by poorly maintained power tools. PERSONAL SAFETY ¦ Keep cutting tools sharp and clean. Properly ¦ Stay alert, watch what you are doing and use maintained cutting tools with sharp cutting edges are common sense when operating a power tool. Do less likely to bind and are easier to control. not use a power tool while you are tired or under the ¦ Use the power tool, accessories and tool bits etc., influence of drugs, alcohol or medication. A moment in accordance with these instructions and in the of inattention while operating power tools may result in 1