Дрель-шуруповерт RYOBI RCD1802M. Инструкция на русском языке

original instructions
Compact Drill Driver
RCD1802

Important!
It is essential that you read the instructions in this manual before operating
this machine.
Subject to technical modifications.

Safety
moment of inattention while operating power tools
GENERAL POWER TOOL SAFETY WARNINGS
may result in serious personal injury.
b.  Use  personal protective equipment.  Always
WARNING                    wear eye protection. Protective equipment such
Read all safety warnings and all instructions. Failure   as dust mask, non-skid safety shoes, hard hat or
to follow the warnings and instructions may result in   hearing protection used for appropriate conditions
electric shock, fire and/or serious injury.  will reduce personal injuries.
c.  Prevent  unintentional starting. Ensure the
switch is in the off-position before connecting
Save all warnings and instructions for future reference.  to power source and/or battery pack, picking up
The  term  “power tool’’ in the  warnings refers  to  your   or carrying the tool. Carrying power tools with your
mains-operated  (corded) power tool or battery-operated   finger on the switch or energising power tools that
(cordless) power tool.                     have the switch on invites accidents.
1. WORK AREA SAFETY                      d.  Remove any adjusting  key or wrench  before
turning the power tool on. A wrench or a key left
a.  Keep work area clean and well  lit. Cluttered or   attached to a rotating  part of the power tool may
dark areas invite accidents.           result in personal injury.
b.  Do  not  operate power  tools  in  explosive   e.  Do not overreach. Keep proper footing  and
atmospheres, such as in the presence  of   balance at all times. This enables better control of
flammable liquids,  gases or dust. Power tools   the power tool in unexpected situations.
create sparks which may ignite the dust or fumes.
c.  Keep children  and  bystanders away while   f.  Dress  properly. Do not wear loose clothing  or
jewellery.  Keep your hair,  clothing  and  gloves
operating a power tool. Distractions can cause   away from moving parts. Loose clothes, jewellery
you to lose control.                   or long hair can be caught in moving parts.
2. ELECTRICAL SAFETY                     g.  If devices are provided for the connection  of
a.  Power tool plugs must match the outlet. Never   dust extraction and collection facilities, ensure
modify the plug  in any way.  Do not  use any   these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
adapter plugs with  earthed (grounded)  power
tools. Unmodified plugs and matching outlets will   4. POWER TOOL USE AND CARE
reduce risk of electric shock.
b.  Avoid  body  contact with  earthed or grounded   a.  Do not force the power tool.  Use the correct
power  tool  for  your  application.  The  correct
surfaces, such as pipes, radiators, ranges and   power tool will do the job better and safer at the rate
refrigerators. There is an increased risk of electric   for which it was designed.
shock if your body is earthed or grounded.
c.  Do not  expose power  tools  to  rain or wet   b.  Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
conditions.  Water  entering a  power tool will   controlled with the switch is  dangerous and must
increase the risk of electric shock.   be repaired.
d.  Do not abuse the cord. Never use the cord for   c.  Disconnect the plug from the power source and/
carrying, pulling or unplugging the power tool.   or the battery pack from the power tool before
Keep cord away from heat, oil,  sharp edges   making any adjustments, changing accessories
or moving  parts. Damaged  or entangled cords   or  storing  power  tools.  Such preventive safety
increase the risk of electric shock.   measures reduce the risk of starting the power tool
e.  When operating a power tool outdoors, use an   accidentally.
extension cord suitable for outdoor use. Use of   d.  Store idle power tools  out  of the reach of
a cord suitable for outdoor use reduces the risk of   children  and  do  not  allow  persons unfamiliar
electric shock.                        with  the power tool  or these instructions  to
f.  If operating a power tool  in a damp location   operate the power tool. Power tools are dangerous
is unavoidable,  use a residual current device   in the hands of untrained users.
(RCD) protected supply. Use of an RCD reduces   e.  Maintain power tools.  Check for misalignment
the risk of electric shock.            or binding  of  moving  parts, breakage of  parts
3. PERSONAL SAFETY                         and  any other  condition  that  may affect the
power tool’s operation. If damaged, have the
a.  Stay alert, watch what you are  doing  and use   power tool repaired before use. Many accidents
common sense when operating a power tool. Do   are caused by poorly maintained power tools.
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A   f.  Keep cutting tools sharp and clean. Properly
maintained  cutting tools with sharp cutting edges
1