Аккумуляторный перфоратор MAKITA SDS-Plus BHR202RFE. Инструкция на русском языке

ENGLISH
INSTRUCTION MANUAL
Cordless Combination Hammer
BHR202
008828
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

ENGLISH
SPECIFICATIONS
Model                               BHR202
Concrete                    20 mm
Capacities          Steel                     13 mm
Wood                       26  mm
-1
No load speed (min )                    0 - 1,100
Blows per minute                       0 - 4,000
Overall length                        358 mm
Net weight                            3.2 kg
Rated voltage                         D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END004-2
Work area safety
Symbols                               1.   Keep work area clean and well lit. Cluttered or
The following show the symbols used for the equipment.   dark areas invite accidents.
Be sure that you understand their meaning before use.   2.   Do not operate power tools  in explosive
?  Read instruction manual.      atmospheres, such as  in the presence of
flammable liquids, gases or dust. Power tools
?  Only for EU countries         create sparks which may ignite the dust or fumes.
Do not dispose of electric  equipment   3.   Keep children and bystanders away  while
together with household waste material!   operating a power tool. Distractions can cause
In observance of  European Directive   you to lose control.
2002/96/EC on  waste electric and   Electrical Safety
electronic  equipment  and  its  4.   Power tool plugs must match the outlet. Never
implementation in accordance with   modify the plug in any  way. Do not use any
national law, electric  equipment that   adapter plugs with earthed (grounded) power
have reached the end of their life must   tools. Unmodified plugs and matching outlets will
be collected separately and returned to   reduce risk of electric shock.
an   environmentally  compatible  5.   Avoid body contact with earthed or grounded
recycling facility.            surfaces such as pipes, radiators, ranges and
ENE043-1   refrigerators.  There is an increased risk of
Intended use                             electric shock if your body is earthed or grounded.
The tool  is intended for hammer  drilling and drilling in   6.   Do not expose  power tools to rain or  wet
brick, concrete and stone as well as for chiselling work.   conditions. Water  entering a  power tool  will
It  is also  suitable  for drilling without impact in wood,   increase the risk of electric shock.
metal, ceramic and plastic.           7.   Do not abuse the cord. Never use the cord for
GEA006-2   carrying, pulling or unplugging the power tool.
General Power Tool Safety                Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or  entangled  cords
Warnings                                 increase the risk of electric shock.
WARNING Read all safety  warnings and all   8.   When operating a power tool outdoors, use an
instructions. Failure  to  follow the warnings and   extension cord suitable for outdoor use. Use of
instructions may result in  electric shock,  fire and/or   a cord suitable for outdoor use reduces the risk of
serious injury.                          electric shock.
9.   If operating a power tool in a damp location is
Save all warnings and                    unavoidable, use a ground fault circuit
instructions for future reference.       interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
The  term "power  tool" in  the warnings refers  to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
2

Personal Safety                          dangerous in the hands of untrained users.
10.  Stay alert, watch what you are doing and use   21.  Maintain power tools. Check for misalignment
common sense when operating a power tool.   or binding of moving parts, breakage of parts
Do not use a power tool while you are tired or   and any  other condition that  may  affect the
under the  influence of drugs, alcohol or   power tool's operation. If damaged, have the
medication.  A  moment of inattention while   power tool repaired before use. Many accidents
operating power tools may result  in  serious   are caused by poorly maintained power tools.
personal injury.                  22.  Keep cutting tools  sharp and clean. Properly
11.  Use personal protective equipment.  Always   maintained cutting tools with sharp cutting edges
wear eye protection. Protective equipment such   are less likely to bind and are easier to control.
as dust mask, non-skid safety shoes, hard hat, or   23.  Use the power tool, accessories and tool bits
hearing protection used for appropriate conditions   etc. in  accordance  with these instructions,
will reduce personal injuries.       taking  into account the  working  conditions
12.  Prevent unintentional starting. Ensure the   and the work to be performed. Use of the power
switch is in the off-position before connecting   tool for operations different from  those  intended
to power source and/or battery pack, picking   could result in a hazardous situation.
up or carrying the tool. . Carrying  power tools   Battery tool use and care
with your finger on the switch or energising power   24.  Recharge  only with  the charger  specified  by
tools that have the switch on invites accidents.   the manufacturer. A charger that is suitable for
13.  Remove any adjusting key or  wrench before   one type of battery pack may create a risk of fire
turning the power tool on. A wrench or a key left   when used with another battery pack.
attached to a rotating part of the power tool may   25.  Use power tools only  with specifically
result in personal injury.           designated battery  packs. Use of any other
14.  Do not overreach. Keep proper footing and   battery packs may create a risk of injury and fire.
balance at all times. This enables better control   26.  When battery pack is not in use, keep it away
of the power tool in unexpected situations.   from other metal objects,  like paper clips,
15.  Dress properly. Do not wear loose clothing or   coins, keys, nails, screws or other small metal
jewellery. Keep your hair, clothing, and gloves   objects, that can make a connection from one
away from moving parts. Loose clothes,   terminal to another. Shorting the battery
jewellery or long hair  can  be  caught in moving   terminals together may cause burns or a fire.
parts.                            27.  Under abusive  conditions, liquid may be
16.  If devices are provided for the connection of   ejected from the battery; avoid  contact.  If
dust extraction and collection facilities,   contact accidentally occurs, flush with water. If
ensure these are connected and properly used.   liquid contacts eyes, additionally seek medical
Use  of dust collection can reduce  dust-related   help. Liquid ejected from the battery may cause
hazards.                             irritation or burns.
Power tool use and care              SERVICE
17.  Do not force the power tool. Use the correct   28.  Have your power tool serviced by a qualified
power tool for  your application. The  correct   repair person using only identical replacement
power tool will do the job better and safer at the   parts. This will ensure that the safety of the power
rate for which it was designed.      tool is maintained.
18.  Do not use the power tool if the switch does   29.  Follow  instruction  for  lubricating  and
not turn it on and off. Any power tool that cannot   changing accessories.
be controlled  with the switch  is dangerous  and   30.  Keep handles dry, clean and free from oil and
must be repaired.                    grease.
19.  Disconnect the plug from the power source                      GEB007-2
and/or the battery  pack  from the  power tool
before making any adjustments, changing   SPECIFIC SAFETY RULES
accessories, or  storing power  tools. Such   DO NOT let comfort or familiarity  with product
preventive safety measures reduce  the risk of   (gained from repeated use) replace strict adherence
starting the power tool accidentally.   to rotary hammer safety rules. If  you use this tool
20.  Store idle power tools out of the  reach of   unsafely or incorrectly,  you can suffer serious
children and do not allow persons unfamiliar   personal injury.
with the power  tool or these instructions to   1.   Wear ear  protectors. Exposure  to noise  can
operate the power  tool.  Power tools are   cause hearing loss.
3