Дрель-шуруповерт MAKITA BTD133Z. Инструкция на русском языке

GB  Cordless Impact Driver             INSTRUCTION MANUAL
S  Batteridriven slagskruvdragare     BRUKSANVISNING
N  Batteridrevet slagskrutrekker      BRUKSANVISNING
FIN  Akkukayttoinen iskuvaannin        KAYTTOOHJE
LV  Bezvada triecienskruvgriezis      LIETOSANAS INSTRUKCIJA
LT  Belaidis smuginis suktuvas        NAUDOJIMO INSTRUKCIJA
EE  Juhtmeta lookkruvikeeraja          KASUTUSJUHEND
RUS  Аккумуляторный ударный шуруповерт  РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
BTD133
BTD145
1

1
1
2                          1
3
1               009204   2               009208   3               009209
1
S  H
2
S  H
S  H
3   S  H
1
A                   B
1                  S  H         5
4
4               011216   5               009211  6                011217
S  H
1
1       2
7               011220   8               004521  9                011406
1
1     2   3
2
3
10              011407  11               011186   12              009222
2

ENGLISH (Original instructions)
Explanation of general view
1-1. Red part            6-1. Changed in three steps   9-2. Sleeve
1-2. Button              6-2. Hard                10-1. Bit
1-3. Battery cartridge   6-3. Medium              10-2. Bit-piece
2-1. Switch trigger      6-4. Soft                10-3. Sleeve
3-1. Lamp                6-5. Hammering force button   11-1. Groove
4-1. Light button        7-1. LED indicator       11-2. Hook
5-1. Reversing switch lever   9-1. Bit            11-3. Screw
SPECIFICATIONS
Model                   BTD133                BTD145
Machine screw      4 mm - 8 mm           4 mm - 8 mm
Capacities    Standard bolt     5 mm - 14 mm          5 mm - 14 mm
High tensile bolt   5 mm - 12 mm         5 mm - 12 mm
Hammer mode (Hard)   0 - 2,400             0 - 2,600
-1
No load speed (min )   Hammer mode (Medium)   0 - 1,800   0 - 2,000
Hammer mode (Soft)   0 - 1,100             0 - 1,300
Hammer mode (Hard)   0 - 3,200             0 - 3,400
Impacts per minute   Hammer mode (Medium)   0 - 2,600    0 - 2,800
Hammer mode (Soft)   0 - 1,100             0 - 1,300
With one-touch bit holder 139 mm   With one-touch bit holder 139 mm
Overall length
Without one-touch bit holder 140 mm  Without one-touch bit holder 140 mm
Net weight (with battery cartridge)   1.4 kg           1.3 kg
Rated voltage             D.C.14.4 V            D.C18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE033-1   Model BTD133
Intended use
The tool is intended for screw driving in wood, metal and   Work mode : impact tightening of fasteners of the
plastic.                                 maximum capacity of the tool
ENG905-1   Vibration emission (a h) : 13.0 m/s 2
Noise                                    Uncertainty (K) : 2.0 m/s 2
The typical A-weighted noise level determined according
to EN60745:                              Model BTD145
Model BTD133                          Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Sound pressure level (L pA) : 92 dB(A)   Vibration emission (a h) : 12.0 m/s 2
Sound power level (L WA) : 103 dB(A)   Uncertainty (K) : 2.0 m/s 2
Uncertainty (K) : 3 dB(A)                                        ENG901-1
•   The declared vibration emission value has been
Model BTD145                          measured in accordance with the standard  test
Sound pressure level (L pA) : 93 dB(A)   method and may be used for comparing one tool
Sound power level (L WA) : 104 dB(A)   with another.
Uncertainty (K) : 3 dB(A)          •   The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Wear ear protection
WARNING:
ENG900-1   •   The vibration emission during actual use of  the
Vibration                                power tool  can  differ from the declared emission
The vibration  total value  (tri-axial vector  sum)   value depending on the ways in which the tool is
determined according to EN60745:         used.
3