Лобзик BLACK&DECKER KS600Е. Инструкция на русском языке

KS600E
KS601E
KS602E
KS603E

English               (Original instructions)                            5
2

Intended use                          3.  Personal safety
Your Black & Decker jigsaw has been designed for sawing   a.  Stay alert, watch what you are doing and use common
wood, plastics and sheet metal. This tool is intended for   sense when operating a power tool. Do not use a power
consumer use only.                      tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
Safety instructions                     operating power tools may result in serious personal injury.
b.  Use personal protective equipment. Always wear eye
General power tool safety warnings      protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
Warning! Read all safety warnings and all   used for appropriate conditions will reduce personal injuries.
@ instructions. Failure to follow the warnings and   c.  Prevent unintentional starting. Ensure the switch is in
instructions listed below may result in electric shock,   the off-position before connecting to power source
fire and/or serious injury.        and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
Save all warnings and instructions for future reference.   energising power tools that have the switch on invites
The term "power tool" in all of the warnings listed below refers   accidents.
to your mains operated (corded) power tool or battery   d.  Remove any adjusting key or wrench before turning
operated (cordless) power tool.         the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
1.  Work area safety                  e.  Do not overreach. Keep proper footing and balance at
a.  Keep work area clean and well lit. Cluttered or dark   all times. This enables better control of the power tool in
areas invite accidents.               unexpected situations.
b.  Do not operate power tools in explosive atmospheres,   f.  Dress properly. Do not wear loose clothing or jewellery.
such as in the presence of flammable liquids, gases   Keep your hair, clothing and gloves away from moving
or dust. Power tools create sparks which may ignite the   parts. Loose clothes, jewellery or long hair can be caught
dust or fumes.                        in moving parts.
c.  Keep children and bystanders away while operating   g.  If devices are provided for the connection of dust
a power tool. Distractions can cause you to lose control.  extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
2.  Electrical safety                   reduce dust-related hazards.
a.  Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs   4.  Power tool use and care
with earthed (grounded) power tools. Unmodified plugs   a.  Do not force the power tool. Use the correct power
and matching outlets will reduce risk of electric shock.  tool for your application. The correct power tool will do
b.  Avoid body contact with earthed or grounded surfaces   the job better and safer at the rate for which it was designed.
such as pipes, radiators, ranges and refrigerators.   b.  Do not use the power tool if the switch does not turn it
There is an increased risk of electric shock if your body is   on and off. Any power tool that cannot be controlled with
earthed or grounded.                  the switch is dangerous and must be repaired.
c.  Do not expose power tools to rain or wet conditions.   c.  Disconnect the plug from the power source and/or the
Water entering a power tool will increase the risk of electric   battery pack from the power tool before making any
shock.                                adjustments, changing accessories, or storing power
d.  Do not abuse the cord. Never use the cord for carrying,   tools. Such preventive safety measures reduce the risk of
pulling or unplugging the power tool. Keep cord away   starting the power tool accidentally.
from heat, oil, sharp edges or moving parts. Damaged   d.  Store idle power tools out of the reach of children and
or entangled cords increase the risk of electric shock.  do not allow persons unfamiliar with the power tool or
e.  When operating a power tool outdoors, use an   these instructions to operate the power tool. Power
extension cord suitable for outdoor use. Use of a cord   tools are dangerous in the hands of untrained users.
suitable for outdoor use reduces the risk of electric shock.  e.  Maintain power tools. Check for misalignment or
f.  If operating a power tool in a damp location is   binding of moving parts, breakage of parts and any
unavoidable, use a residual current device (RCD)   other condition that may affect the power tools
protected supply. Use of an RCD reduces the risk of   operation. If damaged, have the power tool repaired
electric shock.                       before use. Many accidents are caused by poorly
maintained power tools.
5