Перфоратор BLACK&DECKER KD1250K. Инструкция на русском языке

A
B                                                                     C
2

D                                                                      E
F
3

ENGLISH      (Original instructions)
Intended use                          f.  If operating a power tool in a damp location is
Your Black & Decker rotary hammer drill has been designed   unavoidable, use a residual current device (RCD)
for drilling in wood, metal, plastics, and masonry as well as   protected supply. Use of an RCD reduces the risk of
for screwdriving and light chiselling applications. This tool is   electric shock.
intended for consumer use only.
3.  Personal safety
Safety instructions                   a.  Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
General power tool safety warnings      power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
Warning! Read all safety warnings and all   while operating power tools may result in serious personal
@     instructions. Failure to follow the warnings and   injury.
instructions listed below may result in electric   b.  Use personal protective equipment. Always wear eye
shock, fire and/or serious injury.  protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
Save all warnings and instructions for future reference.   used for appropriate conditions will reduce personal
The term "power tool" in the warnings refers to your mains   injuries.
operated (corded) power tool or battery operated (cordless)   c.  Prevent unintentional starting. Ensure the switch is in
power tool.                             the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
1.  Work area safety                    Carrying power tools with your finger on the switch or
a.  Keep work area clean and well lit. Cluttered or dark   energising power tools that have the switch on invites
areas invite accidents.               accidents.
b.  Do not operate power tools in explosive atmospheres,   d.  Remove any adjusting key or wrench before turning
such as in the presence of flammable liquids, gases   the power tool on. A wrench or a key left attached to a
or dust. Power tools create sparks which may ignite the   rotating part of the power tool may result in personal injury.
dust or fumes.                      e.  Do not overreach. Keep proper footing and balance at
c.  Keep children and bystanders away while operating a   all times. This enables better control of the power tool in
power tool.  Distractions can cause you to lose control.  unexpected situations.
f.  Dress properly. Do not wear loose clothing or
2.  Electrical safety                   jewellery. Keep your hair, clothing and gloves away
a.  Power tool plugs must match the outlet. Never modify   from moving parts. Loose clothes, jewellery or long hair
the plug in any way. Do not use any adapter plugs   can be caught in moving parts.
with earthed (grounded) power tools. Unmodified plugs   g.  If devices are provided for the connection of dust
and matching outlets will reduce risk of electric shock.  extraction and collection facilities, ensure these are
b.  Avoid body contact with earthed or grounded   connected and properly used. Use of dust collection can
surfaces such as pipes, radiators, ranges and   reduce dust-related hazards.
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.  4.  Power tool use and care
c.  Do not expose power tools to rain or wet conditions.   a.  Do not force the power tool. Use the correct power
Water entering a power tool will increase the risk of   tool for your application. The correct power tool will do
electric shock.                       the job better and safer at the rate for which it was
d.  Do not abuse the cord. Never use the cord for   designed.
carrying, pulling or unplugging the power tool. Keep   b.  Do not use the power tool if the switch does not turn it
cord away from heat, oil, sharp edges or moving   on and off. Any power tool that cannot be controlled with
parts. Damaged or entangled cords increase the risk of   the switch is dangerous and must be repaired.
electric shock.                     c.  Disconnect the plug from the power source and/or the
e.  When operating a power tool outdoors, use an   battery pack from the power tool before making any
extension cord suitable for outdoor use. Use of a cord   adjustments, changing accessories, or storing power
suitable for outdoor use reduces the risk of electric shock.  tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4