Микроскоп OLYMPUS IX71. Инструкция на английском языке

INSTRUCTIONS
IX71/IX51
INVERTED RESEARCH MICROSCOPE/
INVERTED BASIC MICROSCOPE
This instruction manual is for the Olympus Inverted Microscopes Models IX71 and IX51. To
ensure the safety, obtain optimum performance and to familiarize yourself fully with the use
of the microscope, we recommend that you study this manual thoroughly before operating
the microscope. Retain this instruction manual in an easily accessible place near the work
desk for future reference.                                                          A X 7 3 1 9

IX71/IX51
CONTENTS
Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to
assemble the microscope yourself, please read Chapter 9, “ASSEMBLY” (pages 55 to 65) carefully. For the modules
provided with instruction manuals, also read the assembly procedures in their instruction manuals.
IMPORTANT  — Be sure to read this section for safe use of the equipment. —         1-4
1     MODULE NOMENCLATURE                                                            5
2     CONTROLS                                                                    6-11
3     TRANSMITTED LIGHT BRIGHTFIELD OBSERVATION PROCEDURE                       12, 13
4     USING THE CONTROLS                                                         14-31
4-1  Power Supply Unit and Microscope Frame......................................................................................... 14-16
1   Turning Power On, Adjusting the Brightness  2   Light Path Selection
3   Magnification Change (IX71 Only)  4   Frame Clamping Plate
5   Option Button (IX71 Only)
4-2  Focusing Block............................................................................................................................................................................. 16, 17
1   Rotation Direction of the Coarse/Fine Adjustment Knobs
2   Adjusting the Coarse Adjustment Knob Tension
3   Detaching the Fine Adjustment Knob  4   Pre-focusing Lever
4-3  Stage........................................................................................................................................................................................................... 18, 19
1   Placing the Specimen         2   Moving the Specimen
3   Connecting the Grounding Wire  4   Adjusting the X-Axis/Y-Axis Knob Rotation Tension
4-4  Observation Tube ....................................................................................................................................................................  20-22
1   Adjusting the Interpupillary Distance  2   Adjusting the Diopter
3   Using the Eye Shades         4   Using Eyepiece Micrometer Disks
5   Selecting the Light Path of Observation Tube (U-TR30H-2 Only)
6   Using the CT Turret (U-BI90CT Only)  7   Adjusting the Tilt (U-TBI90 Only)
4-5  Illumination Column IX2-ILL100...........................................................................................................................  22-24
1   Tilting the Illumination Column  2   Mounting the Filters
3   Using the Field Iris Diaphragm
4   Adjusting the Condenser Height Adjustment Knob Tension
5   Mounting the Manipulator
4-6  Illumination Column IX2-ILL30.............................................................................................................................  25, 26
1   Using the Aperture Iris Diaphragm  2   Removing the Condenser Lens
3   Mounting the Filters         4   Using the Filters
4-7  Condenser .......................................................................................................................................................................................... 27-29
1   Centering the Condenser      2   Using the Aperture Iris Diaphragm
3   Flipping Up the Condenser Holder
4-8  Objectives..........................................................................................................................................................................................  30, 31
1   Oil-Proof Cap (UIS Series only)  2   Adjusting the Correction Collar
3   Using Immersion Objectives

5     OTHER OBSERVATION METHODS                                                 32-43
5-1  Phase Contrast Observation (Using the IX2-ILL100 Column) .................................  32-35
5-2  Phase Contrast Observation (Using the IX2-ILL30 Column)....................................  36, 37
5-3  Differential Interference Contrast Observation (Using the IX2-ILL100 Column) ....  38-42
5-4  Simplified Polarized Light Observation (Using the IX2-ILL100 Column).............. 43
5-5  Reflected Light Fluorescence Observation (See Separate Manual) ........................ 43
6     PHOTOMICROGRAPHY AND TV OBSERVATION                                       44-48
6-1  Photomicrography ..................................................................................................................................................................  44-46
6-2  TV Observation ............................................................................................................................................................................  47, 48
7     TROUBLESHOOTING GUIDE                                                     49-51
8     SPECIFICATIONS                                                            52-54
9     ASSEMBLY — See this section for the replacement of the light bulb. — 55-65
PROPER SELECTION OF THE POWER SUPPLY CORD ...................................................................  66, 67
10   LAMP HOUSING INSPECTION SHEET                                                 68
This device complies with the requirements of directive 98/79/EC concerning in vitro diag-
nostic medical devices. CE marking means the conformity to the directive.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.