Настенное крепление NEC Wall Mount PD03W T M P. Инструкция на английском языке

I N S T A L L A T I O N                             I N S T R U C T I O N S
FUSION PORTRAIT MEDIUM TILT MOUNT
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
MTMP1U

MTMP1U                                                                           Installation Instructions
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and  WARNING: Use this mounting system only for its intended
subsidiaries (collectively “Milestone”), intend to make this  use as described in these instructions. Do not use
manual accurate and complete. However, Milestone makes no  attachments not recommended by the manufacturer.
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this  WARNING: Never operate this mounting system if it is
product. The information contained in this document is subject  damaged. Return the mounting system to a service center for
to change without notice or obligation of any kind. Milestone  examination and repair.
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of  WARNING: Do not use this product outdoors.
the information contained in this document.
IMPORTANT ! : The MTMP1U mounts are designed to be
Chief® is a registered trademark of Milestone AV Technologies.  mounted to:
All rights reserved.                                      •  a bare 8" concrete or 8"x8"x16" concrete block wall, or
•  a 2" x 4"  wood stud (16" on-center) wall covered by
drywall with maximum thickness of 5/8":
IMPORTANT SAFETY INSTRUCTIONS!
--SAVE THESE INSTRUCTIONS--
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8” (1.6cm) for
wood studs.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the MTMP1U does not exceed
125 lbs (56.7 kg) when mounted to a single 2" x 4" wood stud;
OR 200 lbs (90.7 kg) when mounted to dual 2" x 4" wood studs
or concrete.
2

Installation Instructions                                                                      MTMP1U
DIMENSIONS
0.34
8.7
7.00
177.8
RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET
1.    MAXIMUM MOUNTING PATTERN IS 18.8" (477.5 mm) WITHOUT REVERSING UPRIGHTS
2.    MAXIMUM MOUNTING PATTERN IS 22.5" (571.5 mm) WITH REVERSING UPRIGHTS
3.    FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK         DIMENSIONS:      INCHES
ENGAGEMENT IS .75" (19 mm)                                                                  [MILLIMETERS]
A                                0.34
8.7
FOR SINGLE STUD
MOUNTING
0.53
13.5
DETAIL A
SCALE 2 : 3
DIMENSIONS:      INCHES
[MILLIMETERS]
3