Уничтожитель бумаг FELLOWES Powershred P-35C. Инструкция на русском языке

POWERSHRED P-35C
®
Please read these instructions before use.
Do not discard: keep for future reference.
Quality Of?ce Products Since 1917

ENGLISH
Model P-35C
A.                                      F.
B.                                      G.
C.                                      H.
I.
KEY
A. Shredder head    F.  Disconnect power switch  I. Control Switch
B. Sheet capacity icon      1. OFF     R   1. Reverse
D.                                                 C. See safety instructions below      2. ON    0   2. Off
D. Bin              G. Handle          I   3. Auto-On
E.                                                 E. Safety Lock      H. Paper/Card entry
To set lock slide
button down
SET UP
Disconnect power switch must be in ON (–) position to operate shredder.
For safety reasons, shredder will operate only if the shredder head is in
correct position and used with supplied basket.
CAPABILITIES
Will shred:   Paper, credit cards, staples, and small paperclips  Maximum:
Will not shred:  Unopened junk mail, continuous forms, adhesive labels, transparencies,   Sheets per pass ............................................................................................................. 5*
newspaper, CD/DVDs, cardboard, large paper clips, laminates, file folders, X-rays or plastic   Cards per pass .................................................................................................................1
other than noted above                                   Paper width ............................................................................................8.75 in. (222mm)
Paper shred size:                                        * 8.5 in. x11 in., 20lb., (75g) paper at 120V/60 Hz, 1.6Amps;  heavier paper, humidity or
Cross-Cut .................................................................5/32 in. x 1-9/16 in. (4mm x 40mm)  other than rated voltage may reduce capacity. Recommended daily usage rates: 20 sheets;
25 cards;       5 sheets per pass.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•  Keep away from children and pets. Keep hands away from paper entry.    •  This shredder has a Disconnect Power Switch (F) that must be in the ON (–)
Always set to off or unplug when not in use.     position to operate shredder. In case of emergency, move switch to OFF (O)
•  Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder   position. This action will stop shredder immediately.
openings. If object enters top opening, switch to Reverse (R) to back out object.  •  Avoid touching exposed cutting blades under shredder head.
•  Never use aerosol products, petroleum based lubricants or other flammable   •  Shredder must be plugged into a properly grounded wall outlet or socket of the
products on or near shredder. Do not use canned air on shredder.  voltage and amperage designated on the label. The grounded outlet or socket
•  Do not use if damaged or defective. Do not disassemble shredder.   must be installed near the equipment and easily accessible. Energy converters,
Do not place near or over heat source or water.  transformers, or extension cords should not be used with this product.
•  Operation, maintenance, and service requirements are covered in the instruction   •  FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
manual. Read the entire instruction manual before operating shredders.  •  For indoor use only.
•  Unplug shredder before cleaning or servicing.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
15     harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

BASIC SHREDDING OPERATION
PAPER/CARD
1              2              3               4              5              6
Continuous operation:                                                        or
2-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond   Plug in and put    Press Auto-On (I)  Check paper amount  Feed paper straight into   Feed into center of   When finished
2-minutes will trigger    disconnect power                       paper entry and release  entry and release  shredding set
20-minute cool down period.  switch in ON (–) position                                          to OFF (O)
BASIC PRODUCT MAINTENANCE
OILING SHREDDER                       FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
All cross-cut shredders require oil for peak performance.   1  2    3
If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty   Set to Off (0)  *Apply oil across entry  Set to Reverse (R)
your waste bin.                                                     for 2-3 seconds
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
PAPER JAM
1            2            3           4
Set to Reverse (R)   Set to Off (O)    Gently pull uncut   Set to Reverse (R)
for 2-3 seconds  and unplug  paper from paper
entry. Plug in.
LIMITED PRODUCT WARRANTY
Limited Warranty:  Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of  incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
defects in material and workmanship and provides service and support for 1 year from the date of  sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
purchase by the original consumer.  Fellowes warrants the cutting blades of the machine to be free  OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
from defects in material and workmanship for 3 years from the date of purchase by the original  WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential
consumer. If any part is found to be defective during the warranty period, your sole and exclusive  or incidental damages attributable to this product. This warranty gives you specific legal rights.
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This  The duration, terms, and conditions of this warranty are valid worldwide, except where different
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage  limitations, restrictions, or conditions may be required by local law. For more details or to obtain
standards, shredder operation using an improper power supply (other than listed on the label), or  service under this warranty, please contact us or your dealer.
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs