Уничтожитель бумаг FELLOWES Powershred M-8C. Инструкция на русском языке

POWERSHRED M-8C                             POWERSHRED M-8C
®
®
Please read these instructions before use.
Do not discard: keep for future reference.
Quality Office Products Since 1917

9
9
9
ENGLISH
Model M-8C
E
A.                             9              F.
G.
B.                                                      KEY
C.                                                     A. Shredder head  E  Disconnect power switch  G. Control switch and LEDs
B. Safety Lock      1. OFF                1. Auto-On (green)
I  2. ON               2. OFF
F.  See safety instructions        3. Reverse
D.                                                                                              4. Overheat (red)
C. Window
D. Bin
15
9                               9
CAPABILITIES
Will shred:  Paper, credit cards, staples and paper clips  Maximum:
Will not shred:  Continuous forms, CD/DVDs, adhesive labels, transparencies, newspaper,   Sheets per pass ............................................................................................................. 8*
cardboard, laminates, X-rays or plastic other than noted above  Cards per pass ............................................................................................................... 1*
Paper shred size:                                        Paper entry width .................................................................................................. 230mm
* A4 (70g), paper at 220-240V, 50/60 Hz, 1.6Amps; heavier paper, humidity or other than
Cross-Cut .................................................................................................... 4mm x 50mm
rated voltage may reduce capacity. Maximum recommended daily usage rates: 60 sheets;
5 cards.      8 sheets per pass.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•  Operation, maintenance, and service requirements are covered in the instruction   •  This shredder has a Disconnect Power Switch (E) that must be in the ON ( )
manual. Read the entire instruction manual before operating shredders.  position to operate shredder. In case of emergency, move switch to OFF (O)
•  Keep away from children and pets. Keep hands away from paper entry. Always set   position. This action will stop shredder immediately.
to off or unplug when not in use.              •  Avoid touching exposed cutting blades under shredder head.
•  Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from   •  Shredder must be plugged into a properly grounded wall outlet or socket of the
shredder openings. If object enters top opening, switch to Reverse (    ) to   voltage and amperage designated on the label. The grounded outlet or socket
back out object.                                 must be installed near the equipment and easily accessible. Energy converters,
15                                                    transformers, or extension cords should not be used with this product.
•  Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.  •  FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
15         •  Do not use if damaged or defective. Do not disassemble shredder.   •  For indoor use only.
Do not place near or over heat source or water.  •  Unplug shredder before cleaning or servicing.
15
15

9
9
9
9     BASIC SHREDDING OPERATION
9
9
PAPER/CARD
1            2            3            4
Continuous operation:
Up to 5 minutes maximum
NOTE: Shredder runs briefly    Plug in and put    9 Set to Auto-On (   )  Feed paper/card   When finished shredding
after each pass to clear entry.   disconnect power    straight into paper   set to OFF ( )
Continuous operation beyond   switch in ON (I) position  entry and release
9
5 minutes will trigger a
30-minute cool down period.
15      Safety Lock prevents accidental operation.      To set, wait for shredding to stop, push black button down and slide towards front of shredder.
To unlock push black button down and slide toward back of shredder. For greater safety, always unplug shredder after use.
PRODUCT MAINTENANCE
OILING SHREDDER  9              9  FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
All cross-cut shredders require oil for peak
9              9                          1            2            3
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
stop running. To avoid these problems, we
recommend you oil your shredder each time   Set to Off ( )  * Apply oil   Set to Reverse (    )
you empty your waste bin.                        across entry   for 2-3 seconds
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
15
Overheat Indicator:  When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature
and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery
time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.
PAPER JAM
1            2            3            4           5            6
15
Set to Reverse    Alternate slowly back and forth  Set to Off ( )    Gently pull uncut   Set to Auto-On (   )
(    ) for 2-3                         and unplug  paper from paper   and resume shredding
seconds                                           entry. Plug in.
LIMITED PRODUCT WARRANTY
Limited Warranty:  Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of  incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
defects in material and workmanship and provides service and support for 2 years from the date of  sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
purchase by the original consumer.  Fellowes warrants the cutting blades of the machine to be free  OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE
from defects in material and workmanship for 3 years from the date of purchase by the original  WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential
consumer. If any part is found to be defective during the warranty period, your sole and exclusive  or incidental damages attributable to this product. This warranty gives you specific legal rights.
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This  The duration, terms, and conditions of this warranty are valid worldwide, except where different
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage  limitations, restrictions, or conditions may be required by local law. For more details or to obtain
standards, shredder operation using an improper power supply (other than listed on the label), or  service under this warranty, please contact us or your dealer.
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.  The
benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the shredder.