Маска сварщика FUBAG OPTIMA 9-13 Tiger. Инструкция на русском языке

Маска сварщика
Welding helmet
OPTIMA 9-13
эксплуатации  OPTIMA 9-13 Tiger
OPTIMA 9-13 Red
Operator's Manual
по
Инструкция
www.fubag.ru

Operator's  manual
www.fubag.ru
WARNING! BEFORE USING THE WELDING HELMET       READ THE INSTRUCTION
MANUAL CAREFULLY! Operation of the welding helmet is allowed only for trained and
qualified specialists after proper reading of this manual.
The detailed description, safety rules and all required information necessary for proper operation
and maintenance of FUBAG welding helmet are provided below. Keep this instruction manual by the
helmet  and refer to it in case of  any doubts concerning safety operation, maintenance, storage, and
handling of FUBAG welding helmet .
1. Safety perationo
- This Auto-Darkening filter Welding Helmet is not suitable for laser welding & xyacetylene
o
w elding/cutting processes .
-  This kind of filter is not suitable if the arc is flickering or heated. In this case it should be
tested before use.
-  This Auto-Darkening filter Welding Helmet is not suitable for the protection against
explosive devices or corrosive liquids.
-  Standard protective plates should be installed on the inner and outer surfaces of the filter.
Improper  use of the protective plates is risky and leads to nonrepairable damages. To be
activated, the photocell should be subjected to direct sunlight for 20-30 minutes before use.
-  Never place this Helmet and Auto-darkening filter on a hot surface.
-  Never open or tamper with the Auto-Darkening Filter.
-  This Auto-darkening filter welding helmet will not protect against severe impact hazards.
-  This helmet will not protect against explosive devices or corrosive liquids.
-  Should this helmet not darken upon striking an arc, stop welding immediately and contact
your supervisor or your dealer.
-  Don't immerse the filter in water.
-  Don't use any solvents on filters' screen or helmet components.
- Operating temperature : - 5°C ~ + 55°C ( 23°F ~ 131°F ).
°
-  Storing temperature:     - 20°C ~ + 70°C (-40 F ~ 158°F).
-  Protect filter from contacting with liquid and dirt.
-  Clean filters' surfaces regularly; do not use strong cleaning solutions. Always keep sensors
and solar cells clean by  using a clean lint-free tissue/cloth.
-  Regularly replace the cracked/scratched/pitted front cover lens.
-  Never try to open the filter cartridge.
- 1  -

Operator's  manual
www.fubag.ru
2. Technical pecificationss
Viewing Area                                        95 х 36 mm
Size of Cartridge                                 110 х 90 х 9 mm
UV/IR Protection                            Up To Shade DIN16 at all time s
Light State                                           DIN 4
Variable Shade                                       DIN 9-13
Power Supply                             Solar cells, no battery change required
Power On/Off                                      Fully Automatic
Sensitivity                                     Adjustable, External
Switching Time:
- Light to Dark                                    0,000033 sec.
- Dark to Light                                    0,25 - 0,8 sec.
Sensors                                                 2
O
O
Operating Temperature                              -5 С to +55 С
O
O
Storing Temperature                                -20 С to +70 С
Helmet Material                      High-impact resistant plastic / Polyamide (Nylon)
Weight                                                0,5 kg
The manufacturer reserves the right to change the manual's content or function without
preliminary notification of the users .
3. Description
This Auto-Darkening filter Welding Helmet is designed to protect the eyes and face from sparks,
spatter, and harmful radiation under normal welding conditions. Auto-darkening filter automatically
changes from a light state to a dark state when an arc is struck, and it returns to the light state when
welding stops.
Auto-Darkening filter Welding Helmet comes ready for operation . The only thing you need to do
before your welding is to adjust the position of the headband and select the correct shade number
for your application.
-  This model is designed & equipped with a special turnover (up & down) headband mechanism.
When welder turns over the helmet to top of the head, the headband mechanism lowers the helmet's
gravity center. This, in turn, helps the headband to be coincided with the center of a welder's head .
The design of welding helmet greatly reduces  the fatigue of welder's head (& neck) and makes a
welder feel more comfortable while working.
-  At the moment when welding starts , it automatically changes filter screen from clear to dark in only
0,000033 .
- WELDING/GRINDING can be selective.
-  Outside sensitivity adjuster can make the operators feel more comfortable while working .
-  At the moment when welding stops , the filter screen automatically changes from dark to light state
according to your pre-set delay time.
-  The helmet utilizes high performance solar cells as power supply and has lithium batteries as
power back-up. No change of battery is required. The battery life is increased  to a new limit. Under
normal welding conditions, users can expect a longer battery life of more years.
-  Variable shade from DIN9 to DIN13 is adjusted by  the turn of a shade knob (shade variable).
- 2  -