На сайте 124213 инструкций общим размером 502.86 Гб , которые состоят из 6279321 страницы
Фото
Руководство пользователя SHARP XL-HF202PHS. Основные функции, характеристики и условия эксплуатации изложены на 2 страницах документа в pdf формате.
Доступно к просмотру 2 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
Special Notes Precautions Controls and indicators (continued) To prevent ? re or shock hazard, do not expose this ? Do not place anything on top of the unit. Remote control appliance to dripping or splashing. No objects ? lled General ? ¦ ¦ The AC power plug is used as a disconnect device and MODEL with liquids, such as vases, shall be placed on the Keep your equipment at least 10 cm (4”) of free space ? shall always remain readily operable. 1 1. Remote Control Transmitter XL-HF202PH(S) ? Hereby, SHARP Electronics declares that this SHARP Hi Fi ? apparatus. ? along the sides, top and back for proper ventilation. ? Do not remove the outer cover, as this may result 2. On/Stand-by Button Do not turn the volume on to full at switch on. Listen to in electric shock. Refer internal service to your lo- 3. Numeric Buttons Component System XL-HF202PH(S)/XL-HF202PH(BK)/XL- music at moderate levels. Excessive sound pressure XL-HF202PH(BK) HF302PH(T) is in compliance with the essential requirements from earphones and headphones can cause hearing 10 cm (4”) 10 cm (4”) 10 cm (4”) ? cal SHARP service facility. 2 18 4. Bass/Treble Button 5. The ventilation should not be impeded by covering the X-Bass Button and other relevant provisions of Directive 1999/5/EC. The loss. declaration of conformity may be consulted at: ventilation openings with items, such as newspapers, 19 6. Tuning Down, Skip Down, Fast Reverse, Time Down Button tablecloths, curtains, etc. XL-HF302PH(T) http://www.sharp.de/doc/XL-HF202PH_XL-HF302PH.pdf Caution: ? No naked A ame sources, such as lighted candles, 3 20 7. Tuner Preset Up Button, iPod Cursor Up ? This product is classi? ed as a CLASS 1 LASER should be placed on the apparatus. 21 8. Volume Down Button HI FI COMPONENT SYSTEM WARNINGS PRODUCT. ? Attention should be drawn to the environmental as- 9. Folder Button When the ON/STAND-BY button is set at STAND-BY ? This product contains a low power laser device. To pects of battery disposal. 22 10. Tuner Preset Down Button, ? ensure continued safety do not remove any cover or 10 cm (4”) 23 iPod Cursor Down position, mains voltage is still present inside the unit. ? This unit should only be used within the range of 5°C 4 When the ON/STAND-BY button is set at STAND-BY attempt to gain access to the inside of the product. Use the unit on a ? rm, level surface free from vibration. - 35°C (41°F - 95°F). 5 24 11. CD Button 12. USB Button Refer all servicing to quali? ed personnel. OPERATION MANUAL position, the unit may be brought into operation by the ? Place the speakers at least 30 cm (12”) away from any ? The apparatus is designed for use in moderate cli- 6 25 13. iPod Button timer mode or remote control. ? CRT TV to avoid colour variations across the TV screen. mates. 26 14. iPod Display Button This unit contains no user serviceable parts. Never 7 ? If the variations persist, move the speakers further away Warning: 15. Disc/USB Display Button remove covers unless quali? ed to do so. This unit 8 27 Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this contains dangerous voltages, always remove mains from the TV. LCD TV is not prone to such variation. The voltage used must be the same as that speci? ed on this 28 16. RDS ASPM Button manual carefully. It will guide you in operating your SHARP product. plug from the socket before any service operation and ? Keep the unit away from direct sunlight, strong mag- unit. Using a higher voltage is dangerous and may result in 9 17. Bluetooth Button 18. Open/Close Button when not in use for a long period. netic ? elds, excessive dust, humidity and electronic / a ? re or other type of accident causing damage. 10 29 19. Memory Button electrical equipment (home computers, facsimiles, etc.) SHARP will not be held responsible for any damage result- which generate electrical noise. ing from such usage. 11 30 20. Clear Button XL-HF202PH(S) Hi Fi Component System consisting of XL-HF202PH(S) (main unit) and CP-HF202H (speaker system). ? Do not expose the unit to moisture, to temperatures 12 31 21. Clock/Timer Button ? higher than 60°C (140°F) or to extremely low tempera- 22. Sleep Button XL-HF202PH(BK) Hi Fi Component System consisting of XL-HF202PH(BK) (main unit) and CP-HF202H (speaker system). Volume control 13 32 23. Repeat Button ? tures. ¦ 33 XL-HF302PH(T) Hi Fi Component System consisting of XL-HF302PH(T) (main unit) and CP-HF302H (speaker system). 14 24. Mute Button ? If the unit does not work properly, unplug and plug it in The sound level at a given volume setting depends on 34 ? 25. Random Button again. Then turn on the unit. speaker ef? ciency, location and various other factors. It is 15 35 26. Tuning Up, Skip Up, Fast Forward, Accessories ? In case of an electrical storm, unplug the unit for safety. advisable to avoid exposure to high volume levels, which 36 Time Up Button ? Hold the AC power plug by the head when removing it occurs while turning the unit on with the volume control 16 37 27. Volume Up Button The following accessories are included. from the wall socket, as pulling the lead can damage setting up high, or while continually listening at high vol- 28. Enter Button internal wires. umes. Excessive sound pressure from earphones and 17 38 29. Demo/Dimmer Button headphones can cause hearing loss. 39 30. Audio/Line (INPUT) Button 31. Tuner Button 32. iPod Play/Pause Button iPad, iPhone, iPod, iPod classic, iPod 33. iPod Menu Button nano,and iPod touch are trademarks of Controls and indicators 34. CD/USB Play/Pause Button 35. CD/USB Stop Button Apple Inc.,registered in the U.S. and other 9 15 36. RDS Display Button countries. Lightning is a trademark of Remote control x 1 “AA” size battery Stand for iPad x 1 NFC tag x 2 1 2 3 4 5 6 7 8 10 11 1312 14 16 37. RDS PTY Button Apple Inc.. (UM/SUM-3, R6, HP-7 or 38. Bluetooth Play / Pause Button similar) x 1 1 2 3 6 39. Bluetooth Pairing Button Display 17 ¦ 18 19 20 21 22 23 24 2526 27 28 29 7 PAIRING 1. USB Indicator iPod Indicators 2. 3. CD Indicator Speaker wires x 2 Speaker wires x 2 FM aerial x 1 Velcro tape Velcro tape 8 4. MP3 Indicator (for XL-HF202PH(S) / (for XL-HF302PH(T)) (hook type) x 2 (loop type) x 3 5. WMA Indicator XL-HF202PH(BK)) 4 5 6. RDM (Random) Indicator 7. MEM (Memory) Indicator The illustration printed in this operation manual are for model XL-HF202PH(S). 8. Repeat Indicator This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher. ¦ Speaker system 9. Play/Pause Indicator ? 10. Tuning FM/Bluetooth status Indicator For device with a lower Android version, refer the operation manual of the device for recommended 11. FM Stereo Mode Indicator ? 9 10 11 12 13 14 15 16 app (application). 1. Dome-Tweeter 12. Stereo Station Indicator 2. Woofer 1 3 13. RDS Indicator The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such 3. Bass ReA ex Duct 14. PTY Indicator marks by SHARP is under license. Other trademarks and trade names are those of their respective owners. Front panel 4. Speaker Terminal 2 4 15. TP Indicator 16. TA Indicator ¦ The N Mark is a trademark or registered trademark of NFC Forum, Inc. In the United States and in other 1. Remote sensor 11. Headphone Socket 17. Muting Indicator countries. 2. Timer indicator 12. Tuner Preset Down, CD/USB, ¦ Speaker grilles are removable 18. X-bass Indicator 3. Disc Tray iPod/iPhone Skip Down Button 19. Title Indicator Special Note 4. Docking Station for iPod or iPhone 13. Tuner Preset Up, CD/USB, Make sure nothing comes into contact 20. Artist Indicator 21. Folder Indicator 5. Pairing Button iPod/iPhone Skip Up Button with the speaker diaphragms when you 22. Album Indicator Supply of this product does not convey a license nor imply any right to distribute content created with this product in 6. Volume Control 14. Disc/USB Stop Button remove the speaker grilles. 23. File Indicator revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating 7. On/Stand-by Button 15. Disc/USB/iPod/iPhone Play or Pause Button 24. Track Indicator streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution 8. FUNCTION Button 16. Disc Tray Open/Close Button 25. Daily Timer Indicator systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact 9. USB Terminal 26. Once Timer Indicator discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for 10. Audio In Socket 27. Disc Indicator Total Indicator 28. such use is required. For details, please visit http://mp3licensing.com 29. Sleep Indicator MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. *TINSEA451AWZZ==*| 13H R MW 1 1 2 3 TINSEA451AWZZ System connections Remote control Bluetooth one touch connection via NFC Bluetooth one touch connection via NFC (continued) Make sure to unplug the AC power lead before making any connections. Battery installation Notes concerning use: Unlike other wireless technology, NFC requires no ¦ Replace the battery if the operating distance is reduced ¦ About NFC technology discovery or pairing. ¦ NFC connection for audio playback Bluetooth operation buttons (remote control only) To select Line In function: Notes: 1 Open the battery cover. ? or if the operation becomes erratic. Purchase an “AA” Simply tap the source device to the NFC tag to instantly Press FUNCTION button (main unit) or AUDIO/LINE (IN- ? No sound is heard from the subwoofer without a built- 2 Insert the supplied battery according to the terminal size battery (UM/SUM-3, R6, HP-7 or similar). Near Field Communication (NFC) is a set of standards for Check that: Press the button to play or pause. PUT) button (remote control) repeatedly until Line in is in ampli? er. indicated in the battery compartment. When inserting ? Periodically clean the transmitter on the remote control devices (smartphones/tablets) to establish radio communi- enjoy seamless connectivity between your smart device Your device (smartphone / tablet) has an NFC function. displayed. ? Subwoofer Pre-out (audio signal): 200mV / 10k ohms or removing the battery, push it towards the (–) battery and the sensor on the unit with a soft cloth. cation with each other by touching/tapping them together and the audio system. ? NFC function on your device is turned on. Press the button to skip up. at 70 Hz. terminals. ? Exposing the sensor on the unit to strong light may or bringing them into close proximity. NFC detection area ? Screen lock function of the device is off. Press and hold to fast forward. interfere with operation. Change the lighting or the di- ? Commercially 3 Close the cover. rection of the unit if this occurs. Using NFC in this product simpli? es the pairing method of ¦ ? This unit is not in Eco mode. TV Audio cable Bluetooth connectivity. Press the button to skip down. Right FM (not supplied) available ? Keep the remote control away from moisture, heat, NFC detection area location may vary depending on the 1 Touch your device to the supplied NFC tag. Press and hold to fast reverse. speaker aerial Subwoofer shock and vibrations. device (smartphone / tablet). Refer operation manual of To TV audio (Ampli? er ? This audio system supports NFC-enabled device with the device for detail. Notes: output socket. Built-In) ¦ Test of the remote control Android 4.1, Jelly Bean and higher. To listen to audio via Bluetooth connectivity without NFC For device with a lower Android version, refer the ? To LINE The remote control can be used within the range shown below: ? tag - refer “Pairing with other Bluetooth source devi- input To audio input operation manual of the device for recommended app ces” on page 8. socket socket Caution: Remote sensor (application). To disconnect, simply touch your device to the tag again. Remove the battery if the unit will not be used for a ? ? NFC tag long period of time. This will prevent potential damage due to battery leakage. 0.2 m - 6 m Search / Do not use rechargeable battery (nickel-cadmium bat- Pairing ? (8” - 20’ ) scan tery, etc.). 2 A pop-up window asking whether to proceed with the Installing the battery incorrectly may cause the unit to Switch ‘ON’ Connect Bluetooth connection appears on the device. Select Left ? malfunction. Bluetooth Manual Bluetooth setting. Wall socket (AC 220 speaker ? Batteries (battery pack or batteries installed) shall not ? The ‘connected’ message appears when the connec- - 240 V ~ Red be exposed to excessive heat such as sunshine, ? re tion is complete. 50/60 Hz) or the like. 3 Playback will start automatically. Otherwise, press play (on remote control or source device). Sound will be heard from the speakers of this unit via A Bluetooth audio ? General control source device audio streaming. Your device and NFC tag must be within 10 meters (smartphone / ? from the unit To turn the power on Auto power off function tablet). . ¦ ¦ Press the ON/STAND-BY button to turn the power on or off. The main unit will enter the stand-by mode (when iPad, NFC tag iPod or iPhone is not connected) after 15 minutes of inactiv- (during Bluetooth stand-by mode) Listening to Bluetooth enabled devices Display brightness control ity during: ¦ Press the DEMO/DIMMER button (remote control). iPod: Not docked. NFC tag set up ¦ Bluetooth Audio/Line In: No detection of input signal. Dimmer 1 (Display is dim). CD: In the stop mode or no disc. ¦ Bluetooth wireless technology is a short-range radio Aerial connection Demonstration mode USB: In the stop mode or no media. The NFC tags can be placed anywhere convenient to you. 1 Peel the separator off the velcro tape (loop type) and Dimmer 2 (Display gets dimmer). Bluetooth: In the pause mode on not connected condition. The velcro tapes supplied will help to secure the tags onto stick it on a desired surface. ¦ ¦ technology that enables wireless communication between Supplied FM aerial: The ? rst time the unit is plugged in, it will enter the the desired location. various types of digital devices, such as mobile phone or Connect to the FM 75 OHMS socket and position it where ? Bluetooth stand-by (demonstration) mode. “Bluetooth Dimmer off (Display is bright). Note: computer. It operates within a range of about 10 meters (30 reception is best. Stby” will be displayed. However, if iPod or iPhone is docked, the unit will begin Caution : Separator feet) without the hassle of having to use cables to connect External FM aerial: ? To cancel the Bluetooth stand-by (demonstration) ¦ Volume auto fade-in charging. “Charge Mode” will be displayed. ? Make sure that the NFC tag is placed on a ? at and level Velcro these devices. Use an external FM aerial (75 ohms coaxial cable) for mode, press the DEMO button (remote control) dur- surface. tape (loop This unit supports the following: better reception. Disconnect the supplied FM aerial wire ing power stand-by mode. The unit will enter the low If you turn off and on the main unit with the volume set to ¦ X-Bass control If you choose not to use the velcro tape, do not place before use. power consumption mode. 27 or higher, the volume starts at 16 and fades in to the When the power is ? rst turned on, the unit is in the extra ? the NFC tag near metal surface to avoid connection type) Communication System: Bluetooth Speci? cation version last set level. 2.1 Bluetooth + Enhanced Data Rate (EDR). Note: ? To return to the Bluetooth stand-by (demonstration) bass mode. “X-BASS” indicator appears. To cancel this interference during tagging. Support Pro? le : A2DP (Advanced Audio Distribution Pro? le) mode, press the DEMO button again. Keep the aerial away from the unit or AC power lead to During Bluetooth stand-by condition, NFC function is ac- Volume control mode, press the X-BASS button (remote control). Important: 2 Peel the separator off the velcro tape (hook type) and and AVRCP (Audio/Video Remote Control Pro? le) avoid noise pickup. ? tivated once your device touch the supplied NFC tag. ¦ ? NFC tag has unique ID for each individual set, SHARP stick it to the rear of the NFC tag. Then place the tag If iPod or iPhone is docked, the unit will begin charg- Turn the volume knob towards VOLUME +/– (main unit) ¦ Bass or Treble control provides 2 identical tags for your convenience. onto the desired location. Notes when using unit with a mobile phone Speaker connection ? or press VOL +/– (remote control) to increase or decrease ? This unit cannot be used to talk over the telephone even ¦ ing. the volume. 1 Press the BASS/TREBLE button to select “Bass” or “Treble”. ? SHARP will not be held liable for the damages caused Velcro tape when there is a Bluetooth connection made to a mobile “Charge Mode” will be displayed. Demonstration mode 2 Within 5 seconds, press the VOLUME (+ or –) button to ad- by rewriting the tags. phone. Speaker XL-HF202 XL-HF302 is invalid during charge mode. ¦ Muting just the bass or treble. Keep all small parts away from children as they may Separator (hook type) ? Please refer to the operating manual supplied with the terminal be accidentally swallowed. mobile phone for details on operation of your mobile + terminal red wire wire with red insulation tube ¦ AC power connection To mute the volume, press the button (remote control). phone while transmitting the sound using a Bluetooth Press again to restore the volume. - terminal black wire wire with black insulation tube After all connections have been made correctly, plug the - 5 - - 4 ........ - + 4 - + 5 - 5 - - 4 ........ - + 4 - + 5 connection. ¦ Pairing Bluetooth devices AC power lead into the wall socket. ¦ Direct key power on function Bluetooth devices need to be initially paired ? rst before they Use speakers with an impedance of 4 ohms or more, ¦ Function Rear view of the ? Note: When you press any of the following buttons, the unit turns can exchange data. Once paired, it is not necessary to pair as lower impedance speakers can damage the unit. on. Press the FUNCTION button repeatedly to select desired NFC tag Do not mistake the right and the left channels. The Unplug the AC power lead from the wall socket if the unit them again unless: ? CD, USB, iPod, BLUETOOTH, AUDIO/LINE (INPUT), function. pairing is made with more than 8 devices. Pairing can right speaker is the one on the right side when you will not be in use for a prolonged period of time. ? ? face the unit. TUNER, iPod / , CD/USB / , BLUETOOTH / on the CD FM STEREO FM MONO only be made one device at a time. This unit can be Do not let the bare speaker remote control: Selected function is activated. paired to a maximum of 8 devices. If subsequent device ? USB wires touch each other. ? / button on the main unit: The unit turns on and Bluetooth is paired, the oldest device paired, will be deleted and Do not allow any objects to fall playback of the last function will start (CD, USB, iPod, replaced with the new one. ? Line In Audio In iPod into or to be placed in the bass BLUETOOTH, AUDIO IN, LINE IN, TUNER) Note: this unit is reset. All pairing information is deleted when reA ex ducts. ? unit is reset. Do not stand or sit on the The backup function will protect the memorised function ? Incorrect mode for a few hours should there be a power failure or pairing information is deleted while re-pairing, etc. speakers. You may be injured. ? the AC power lead becomes disconnected. 4 5 6 7 Listening to Bluetooth enabled devices (continued) Listening on Android™ devices Listening to the iPod, iPhone or iPad Listening to the iPod, iPhone or iPad (continued) Indicators: ? If this unit or the source device is turned off before Blue- Introduction : Open Accessory Android device playback Made for: 2 Dock your iPod or iPhone into the unit. Various iPod, iPhone and iPad functions tooth connection is completed, pairing will not be com- ¦ ¦ ¦ Indicator Condition Bluetooth status 1 Press the ON/STAND-BY button to turn the power on. iPhone 5 iPod touch (5th generation) pleted and the pairing information will not be memo- Open Accessory support allows external USB hardware ? iPhone 4S ? iPod touch (4th generation) iPhone (bottom) Blinks In waiting or pairing mode rised. Repeat step 1 onwards to start pairing again. (an Android USB accessory) to interact with an Android- 2 Press the USB button (remote control) or FUNCTION ? iPhone 4 ? iPod touch (3rd generation) iPhone Function Main unit Remote control Operation button repeatedly (main unit) to select USB function. ? ? Lights up Connected To pair with other devices, repeat steps 1 - 5 for each powered device in a special accessory mode. When an 3 Connect the device (Smartphone/Tablet) to the unit. ? iPhone 3GS ? iPod touch (2nd generation) Dock/USB Dock USB ? Android-powered device is in accessory mode, the con- ? iPhone 3G ? iPod touch (1st generation) No indication Unconnected device. This unit can be paired to a maximum of 8 de- nected accessory acts as the USB host (powers the bus “USB Media” will be displayed. ? iPhone ? iPod classic Lightning connector Play iPod CD/USB Press in the pause mode. However, the indication status is not displayed during vices. If subsequent device is paired, the oldest device and enumerates devices) and the Android-powered device ? iPad (4th generation) ? iPod nano (7th generation) Pause Press in the iPod nano (6th generation) iPad mini Bluetooth stand-by mode. paired, will be deleted and replaced with the new one. acts in the USB accessory role. Android USB accessories ? iPad (3rd generation) ? iPod nano (5th generation) playback mode. ? ? Once a device is ousted or deleted from the pairing list, are speci? cally designed to attach to Android-powered iPad 2 iPod nano (4th generation) ? 4 Press the play button (on main unit, remote control or ? iPad ? iPod nano (3rd generation) Lightning Track Press in the Pairing with other Bluetooth source devices the pairing information for the device is also deleted. To devices and adhere to the Open Accessory Protocol, that ? ? iPod nano (2nd generation) connector up/ playback or pause ¦ device). ? listen to the sound from the device again, it needs to be allows them to detect Android-powered devices that support Caution: down mode. If you press re-paired. Perform steps 1 - 5 to pair the device again. accessory mode. Notes: the button in the 1 Press the ON/STAND-BY button to turn the power on. If the source device has an extra bass or equalizer Update your iPod, iPhone and iPad unit to the latest soft- Dock for iPhone pause mode, press 2 Press the FUNCTION button (main unit) repeatedly or Listening to the sound 1 Insert the connector to the device. ? function, set them to off. If these functions are on, ware version before using them. Visit Apple’s homepage to the / button to BLUETOOTH button (remote control) to select Blue- ¦ sound may be distorted. download the latest version. start the desired tooth function. “Bluetooth” appears on the display. Check that: Incoming calls will pause the playback/application. Notes: track. 3 Press and hold the PAIRING button for 3 seconds or The source device Bluetooth functionality is ON. Device ? Once the calls are answered, the conversation can only Charging terminal for iPod, iPhone and iPad: iPod or iPhone playback (Dock) Fast Press and hold more. “Start Pairing” appears on the display. The unit ? ? be heard through the built-in speaker of the cellular ? ¦ forward/ down in the is now in pairing mode and is ready to be paired with ? Pairing of this unit and the source device is completed. (Smartphone/Tablet) Condition DOCK USB 1 Press the ON/STAND-BY button to turn the power on. reverse playback mode. other Bluetooth source device. ? Unit is in connected mode. device. Turn on the device speaker or disconnect the USB function NO YES 2 Press the iPod button on the remote control or FUNCTION Release the 4 Perform pairing procedure on the source device to 1 Press the ON/STAND-BY button to turn the power on. Connector device to start conversation. Other function ¦ iPod, iPhone or iPad playback (USB terminal) button repeatedly on the main unit to select iPod function. button to resume playback. detect this unit. “SHARP XL-HF202” will appear in 2 Press the FUNCTION button to select Bluetooth func- (Bluetooth/CD/Tuner/ YES NO 1 Press the ON/STAND-BY button to turn the power on. 3 Insert iPod or iPhone unit into the dock of main unit. the detected devices list (if available) in the source tion. USB/iPod/Audio/Line in) “Dock Ok” will appear. Display iPod Press to display device. (Refer the source device operating manual for ¦ To disconnect the Android device 2 Press the USB button (remote control) or FUNCTION 4 Press the / (iPod / ) button to start playback. ____ iPod information. details). 3 Start the Bluetooth connection from the Bluetooth 2 Connect the device to the main unit via USB connector. 1 Quit the application (apps). Bluetooth Stand-by YES NO button repeatedly (main unit) to select USB function. Notes: stereo audio source device. 2 Disconnect the device from the USB terminal. ? The message “This accessory is not made to work with 3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” Place the devices to be paired within 1 meter (3 4 Press the BLUETOOTH / button. iPhone” or similar, may appear on the iPhone screen when: will appear. ¦ To disconnect iPod, iPhone or iPad Repeat Press to toggle ? ____ feet) of each other when pairing. Notes: Various functions - battery is low. Simply remove the iPod or iPhone from the docking station repeat mode. Some source devices are unable to display lists of For various Bluetooth operations, refer “NFC con- ¦ - the iPhone is not properly docked (eg. slanting). or iPad connector from USB terminal. It is safe to do so ? ? If this occurs, remove and re-dock the iPhone. detected devices. To pair this unit with the source nection for audio playback” on page 7. The headphone output is switched off during inserting iPod, even during playback. Shuf? e ____ Press to toggle device, refer to the source device operating man- ? If the source device has an extra bass function or Function Remote control Operation ? iPhone and iPad unit. This is an Apple product speci? cation. Track number shufA e mode. ual for details. equalizer function, set them to off to avoid sound Track Press in the playback or 4 Press the / (CD/USB / ) button to start playback. ¦ Navigating the iPod, iPhone or iPad menus Menu iPod Press to view the 5 Select “SHARP XL-HF202” from the source list. If distortion. up/down stop mode. ¦ iPod, iPhone and iPad connection (USB only) Note: ____ iPod menu during Passcode* is required, enter “0000”. Notes: If you press the button 1 Insert the connector to the iPod, iPhone or iPad. Stop button ( ) is invalid during iPod, iPhone or iPad play- 1 Press the MENU button to view the menu on iPod, iPhone iPod function. or iPad unit. Press it again to go back to previous menu. * Passcode may be called PIN Code, Passkey, PIN ? Make the Bluetooth connection again if the source device USB connector in the stop mode, press back. 2 Use the PRESET ( or ) button to select an item on the / button to start the number or Password. is not turned on, or its Bluetooth functionality is off or is in (not supplied) desired track. the menu and then press ENTER button. Enter Press to con? rm the 6 “Pair Complete” and then “Connected” appears on the sleep mode. Fast Press and hold down in iPad Note for iPhone playback: ____ selection. display once the unit is successfully paired with the forward/ the playback mode. ? Sound will only switch from iPhone to the main unit Note: source device. (Pairing information is now memorised To disconnect the Bluetooth device reverse Release the button to after authentication process is completed in approxi- When navigating the iPod, iPhone or iPad menu with re- Cursor Press to select the in the unit.) Some audio source devices may connect ¦ resume playback. mately 10 seconds. mote control, do not operate any of the buttons on the iPod Up/ ____ iPod menu. with the unit automatically after pairing is completed, Perform any of the followings. Connector ? Incoming calls will pause the playback. or iPhone unit. The volume level is adjusted by pressing Down otherwise follow the instructions in the source device – Disconnect the Bluetooth connection on the audio source Notes: ? Once the calls are answered, the conversation can the VOL (+ or –) button on the main unit or the remote operating manual to start connection. device. Refer the operating manual supplied with the If non-compatible device is detected, “Dev No Support” only be heard through the built-in iPhone speaker. control. Adjusting the volume on the iPod, iPhone or iPad Turn on the iPhone speaker or undock the iPhone to 7 Press the play button on main unit, remote control or device. ? will be displayed. start conversation. units give no effect. source device to start Bluetooth connection. – Turn off the Bluetooth stereo audio source device. ? Controls (play/pause/skip up/skip down) will function 2 Place the iPad to the stand for iPad. iPod, iPhone and iPad operations: – Turn off this unit. based on actual Applications (Apps) controls used on iPod and iPhone connection (Dock only) The operations described below depend on the generation Notes: Android devices. iPad ¦ iPod, iPhone and iPad you are using. Note: If a device such as microwave oven, wireless LAN card, Caution: System on operation: ? The volume of this unit may not be controlled as intended Bluetooth device or any other device that uses the depending on the device. Android is a trademark of Google Inc. Unplug all accessories from the iPod or iPhone before When the main unit is powered on, the iPod, iPhone or same 2.4 GHz frequency near the system some sound inserting it into the dock. iPad units will automatically power on when docked or interruption may be heard. Stand for iPad Note: connected to the unit. The transmission distance of the wireless signal be- Auto power on Docking station is for iPod touch (5th generation), iPod System off (stand-by operation): ? ¦ tween the device and the main unit is about 10 m (32 ‘), nano (7th generation) and iPhone 5 connection only. Other When the main unit is turned to stand-by mode, the docked but may vary depending on your operating environment. During Bluetooth Stand-by mode, when music is played from Apple products (iPod, iPhone and iPad) can be connected iPod, iPhone or connected iPad unit will automatically turn to stand-by mode. your device, the unit will automatically power on when the If a steel concrete or metallic wall is between the device 3 Connect the iPod, iPhone or iPad to the unit via USB via USB terminal. and the main unit, the system may not operate at all, Bluetooth connection has been set up between the main unit connector. 1 Open the docking station for iPod and iPhone by pulling up the cover. and your device and they remain connected. because the wireless signal cannot penetrate metal. Note: This function is not applicable during Demonstration mode USB off. Note: USB terminal does not support VIDEO out. 8 9 10 11 Listening to a CD or MP3/WMA disc Listening to a CD or MP3/WMA disc (continued) Listening to USB mass storage device/MP3 player Listening to the radio Various disc functions Repeat play To cancel the programmed play mode: Notes: 4 Within 30 seconds, press the MEMORY button to store During programmed stop mode, press the (CD ) but- ? SHARP will not be held liable for the loss of data while the ¦ ¦ that station in memory. If the “MEM” and preset number Repeat play can play one track, all tracks or a programmed se- ton. The display will show “Memory Clear” and all the pro- USB memory device is connected to the audio system. indicators disappear before the station is memorised, Function Main Remote Operation quence continuously. grammed contents will be cleared. Files compressed in MP3 and/or WMA format can be repeat the operation from step 2. unit control To repeat one track: ? played back when connected to the USB terminal. 5 Repeat steps 1 - 4 to set other stations, or to change Play Press in the stop mode. Select desired track using the Numeric buttons. Adding tracks to the programme: ? This USB memory’s format supports FAT 16 or FAT 32. a preset station. When a new station is stored in the memory, the station previously memorised for that Pause Press in the playback Press the REPEAT button repeatedly until “Repeat One” appears. If a programme has been previously stored, the “MEM” ? SHARP cannot guarantee that all USB memory de- preset channel number will be erased. mode. Press the Press the / (CD/USB / ) button. indicator will be displayed. Press the MEMORY button. vices will work on this audio system. / button to resume To repeat all tracks: Then follow steps 2 - 3 to add tracks. USB cable is not recommended for use in this audio Note: playback from the Press the REPEAT button repeatedly until “Repeat All” appears. Notes: ? system to connect to USB memory device. Use of The backup function protects the memorised stations for a paused point. Press the / (CD/USB / ) button. the USB cable will affect the performance of this au- few hours should there be a power failure or the AC power Stop Press in the playback To repeat desired tracks: ? When the disc compartment is opened, the programme dio system. iPod, iPhone and iPad is not prone to this lead become disconnected. is automatically cancelled. mode. Perform steps 1 - 5 in “Programmed play” section on this page condition. and then press the REPEAT button repeatedly until “Repeat All” ? If you press the ON/STAND-BY button to enter the ¦ To recall a memorised station Track Press in the playback or appears. stand-by mode or change the function from CD to an- ? This USB memory cannot be operated via USB hub. up/down stop mode. To repeat one folder: other, the programmed selections will be cleared. ? The USB terminal in this unit is not intended for a PC Press and hold the PRESET ( or ) button to select the If you press the button While in Folder mode on (MP3/WMA), press REPEAT button ? During the programme operation, random play is not connection. desired station. in the stop mode, press repeatedly until “Repeat Folder” appears. Press the / (CD/ possible. ? External HDD-storage cannot be played back via USB the / button to start USB / ) button. terminal. ¦ To scan the preset stations the desired track. To cancel repeat play: Procedure to playback MP3/WMA disc ? If the data inside the USB memory is large, it may take 1 Press and hold the PRESET ( or ). button until the Fast Press and hold down in Press the REPEAT button repeatedly until “Normal” appears and ¦ with folder mode on longer time for the data to be read. preset number A ashes. The programmed stations will forward/ the playback mode. “ ” disappears. ? This product can play WMA and MP3 ? les. It will au- be tuned in sequentially, for 5 seconds each. reverse Release the button to To play back CD-R/RW. tomatically detect the ? le type being played. If unplay- ¦ Tuning 2 Press the PRESET ( or ) bbutton again when the Disc playback resume playback. 1 Press the CD button on the remote control, and load able ? le is played on this product, “Not Support” is in- 1 Press the ON/STAND-BY button to turn the power on. desired station is located. ¦ an MP3/WMA disc. Press the FOLDER button and dicated and the ? le will be automatically skipped. This disc info will be displayed. Note: 2 Press the TUNER button (remote control) or 1 Press the ON/STAND-BY button to turn the power on. Direct track search will take a few seconds. If abnormal indications appear FUNCTION button (main unit) repeatedly to select FM ¦ To erase entire preset memory ¦ MP3 indicator 2 Press the CD button on the remote control or FUNCTION This product is not compatible with MTP and AAC ? le sys- on the display due to the unspeci? ed ? le, turn off the Stereo or FM Mono. 1 Press the ON/STAND-BY button to turn the power on. button repeatedly on the main unit to select CD function. Use the Numeric buttons (remote control) to select the Caution: WMA indicator TOTAL indicator tems from USB mass storage device or MP3 player. unit and then turn it on again. 3 ? Manual tuning: 2 Press the FUNCTION button (main unit) repeatedly 3 Press the OPEN/CLOSE button to open the disc compart- desired track while playing the selected disc. After performing repeat play, be sure to press the (CD/ ? This product relates to USB mass storage devices Press the TUNING ( or ) button repeatedly to tune or TUNER button (remote control) to select Tuner The Numeric buttons allow you to select up to number 9. ment. ? When selecting number 10 or higher, use the “10+” button. USB ) button. Otherwise, the disc will play continuously. ¦ To play back USB/MP3 player with folder and MP3 players. It may however face some irregu- in to the desired station. function. 4 Place the disc in the disc compartment, label side front. ? mode on / off larities due to various unforeseen reasons from some ? Auto tuning: 3 In Tuner function, press and hold the CLEAR button A. For example, to choose 13 5 Press the OPEN/CLOSE button to close the disc tray. 1 Press the “10+” button once. ¦ Programmed play (CD) Total number of folder Total number of ? les 1 Press the USB button (remote control) or FUNCTION devices. Should this happen, turn off the unit and then Press and hold the TUNING ( or ) button. Scanning will (remote control) until “Tuner Clear” appears. 6 Press the / (CD/USB / ) button to start playback. button (main unit) repeatedly to select USB function. turn it on again. start automatically and the tuner will stop at the ? rst receiv- 2 Press the “1” button. 1 While in the stop mode, press the MEMORY button on the 2 Press the PRESET ( or ) button to select desired Connect the USB memory device that has MP3/WMA ? During CD function, MP3 player will not be charging. able broadcast station. To stop playback: 3 Press the “3” button. Selected track number remote control to enter the programming save mode. playback folder. (Folder mode on) format ? les on the unit. When the USB memory is con- The following functions are the same as CD operations: Notes: Press the (CD/USB ) button. 2 Press the or button to select the desired track. FOLDER nected to the main unit, the device information will be ? Page ? When radio interference occurs, auto scan tuning may B. For example, to choose 130 indicator displayed. Caution: 1 Press the “10+” button twice. Direct track search ...................................................... 12 stop automatically at that point. Do not place two discs in one-disc-tray. To playback with folder mode on, follow step 2 below. ? Auto scan tuning will skip weak signal stations. ? 2 Press the “1” button. To playback with folder mode off, skip to step 3 below. Repeat play .................................................................. 13 To stop the auto tuning, press the TUNING ( or ) Do not play discs of special shapes (heart, octagon, ? ? 3 Press the “3” button. 2 Press the FOLDER button, and press the PRESET ( or Random play ................................................................ 12 button again. Using the Radio Data System (RDS) etc). It may cause malfunctions. Selected track number FOLDER number First track number in Do not push the disc tray while it is moving. 4 Press the “0” button. 3 Press the MEMORY button to save the track number. the folder ) button to select desired playback folder. To start play- Programmed play (MP3/WMA) ................................... 13 ? When an RDS (Radio Data System) station is tuned in, ? back, go to step 4. To change the playback folder, press the frequency will be displayed ? rst, and then the RDS in- RDS is a broadcasting service which a growing If the power fails wait until the power is restored. Notes: 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be ? 3 Select desired ? le to be played back by pressing the the PRESET ( or ) button to select another folder. Note: dicator will light up. Finally, the station name will appear. number of FM stations provide. These FM stations If TV or radio interference occurs during CD operation, A track number higher than the number of tracks on programmed. If you want to check the programmed tracks, ? ? or button. 3 Select desired ? le to be played back by pressing the Full auto tuning can be achieved for RDS stations send additional signals along with their regular pro- move the unit away from the TV or radio. the disc cannot be selected. press the MEMORY button repeatedly. To clear the pro- If USB memory device is not connected, “USB No Media” ? Be sure to place 8 cm (3”) disc in the middle of the During random play, direct search is not possible. grammed tracks, press the CLEAR button. 4 Press the / (CD/USB / ) button. Playback will start or button. will be shown on the display. “ASPM”, see page 16. gramme signals. They send their station names, and ? ? and ? le name will be displayed. disc tray. 5 Press the / (CD/USB / ) button to start playback. 4 Press the / (CD/USB / ) button. Playback will start Notes: To receive an FM stereo transmission: information about the type of programme such as Due to the structure of the disc information, it takes Title, Artist and Album name are displayed if they and the ? le name will be displayed. Press the TUNER button to select stereo mode. “ST” sport, music, etc. ? ¦ Random play ? This unit only supports “MPEG-1 Audio Layer-3” for- ? longer to read an MP3/WMA disc than a normal CD ¦ Programmed play (MP3/WMA) are recorded on the disc. ? Title, Artist and Album name are displayed if they ? indicator will be displayed. “ ” and “ ” will appear When tuned to an RDS station, “RDS” and the station (approximately 20 to 90 seconds). To random play all tracks: ? In case of playback with the folder mode on, press are recorded in the USB memory device. mat. (Sampling Frequency is 32, 44.1, 48kHz) when an FM broadcast is in stereo. name will be displayed. Note for CD or MP3/WMA disc: Press RANDOM button on the remote control until “Random” 1 While in the stop mode, press the MEMORY button to the PRESET ( or ) button, and the folder can ? Display content can be changed by pressing the ? Playback order for MP3 ? les may differ depending on ? If the FM reception is weak, press the TUNER button “TP” (Traf? c Programme) will appear on the display when the writing software used during ? le download. enter the programming save mode. Rewritable multi-session discs with un? nished writing, appears. Press the / (CD/USB / ) button. be selected even though it is in playback/pause CD/USB DISPLAY button. Bitrate which is supported by MP3 is 32~320 kbps, to extinguish the “ST” indicator. The reception changes the received broadcast carries traf? c information, and “TA” ? 2 Press the PRESET ( or ) button on the remote con- ? to monaural, and the sound becomes clearer. (Traf? c Announcement) will appear whilst a traf? c informa- can still be played. To cancel random play: trol to select the desired folder. mode. It will continue playback/pause mode in the Note: WMA is 64~160 kbps. Press the RANDOM button again. “RDM” indicator will dis- 1st track of the selected folder. To pause playback: ? Files without MP3/WMA format cannot be played back. tion is on air.“ appear. Display content can be changed by pressing the Press the / (CD/USB / ) button. Playlists are not supported on this unit. ¦ Memorising a station “PTYI” (Dynamic PTY Indicator) will appear whilst the Dy- ? ? namic PTY station is received. CD/USB DISPLAY button. ? This unit can display Folder Name or File Name up to You can store 40 FM stations in memory and recall them Then press the or button (remote control) to se- File name display Folder display ¦ To remove USB memory device 32 characters. at the push of a button. (Preset tuning) Total number of folders read is 999 including folder lect the desired tracks. 1 Press the (CD/USB ) button to stop playback. ? with non-playable ? le. However, the display shows 1 Perform steps 2 - 3 in “Tuning”. Counter display Title display only folder with MP3/WMA ? les. 2 Press the MEMORY button. Notes: 2 Disconnect USB memory device from the USB terminal. If you press the button during random play, you Album display Artist display ? The display playback time may not be displayed cor- ? rectly when playing back a variable bitrate ? le. can move to the track selected next by the random operation. However, the button does not allow you 3 Press the MEMORY button to save the folder and track Note: ? WMA meta tag also supports title, artist and album to move to the previous track. The beginning of the number. If “Not Support” is displayed, it means “Copyright protected name which are recorded in WMA ? les. Copyright pro- 3 Within 30 seconds, press the PRESET ( or ) button track being played will be located. 4 Repeat steps 2 – 3 for other folder/tracks. Up to 32 tected WMA ? les cannot be played back. to select the preset channel number. Store the stations In random play, the unit will select and play tracks auto- tracks can be programmed. WMA ? le” or “Not supported playback ? le” is selected. in memory, in order, starting with preset channel 1. ? matically. (You cannot select the order of the tracks.) 5 Press the / (CD/USB / ) button to start playback. 12 13 14 15 2013-08-06 08:56:22 XL-HF202-302_OM_SUK_EN_A1.indd 1 2013-08-06 08:56:22 XL-HF202-302_OM_SUK_EN_A1.indd 1
Using the Radio Data System (RDS) (continued) Using the Radio Data System (RDS) (continued) Setting the clock (Remote control Timer and sleep operation (Remote Timer and sleep operation (Remote control only) (continued) Notes: 4 While the selected programme type is A ashing Descriptions of the PTY (Programme Type) codes, TP only) control only) 12 When the preset time is reached, playback will start. The Information provided by RDS Sleep operation ¦ If the same station is broadcasting on different frequen- (within 6 seconds), press the RDS PTY button (Traf? c Programme) and TA (Traf? c Announcement) volume will increase gradually until it reaches the preset ¦ ? cies, the strongest frequency will be stored in memory. again. NEWS POP M SOCIAL FOLK M Timer playback: volume. The timer indicator will blink during timer play- The radio, disc, iPod, USB, Audio In and Line In can all be You can control the RDS by using the buttons on ? Any station which has the same frequency as the one The unit turns on and plays the desired source (CD, TUN- back. turned off automatically. the remote control only. stored in memory will not be stored. AFFAIRS ROCK M RELIGION DOCUMENT ER, USB, iPod, AUDIO IN, LINE IN) at a preset time. 13 When the timer end time is reached, the system will 1 Play back the desired sound source. ? If 40 stations have already been stored in memory, the INFO EASY M PHONE IN TEST enter the power stand-by mode automatically. Each time the RDS DISPLAY button is pressed, the scan will be aborted. If you want to redo the ASPM SPORT LIGHT M TRAVEL ALARM This unit has 2 types of timer: ONCE TIMER and DAILY Once timer: 2 Press the SLEEP button. display will switch as follows: operation, erase the preset memory. After the selected programme type has been lit for 2 sec- TIMER. 3 Within 5 seconds, press the Numeric button to set the ? If no station have been stored in memory, “END” will onds, “SEARCH” will appear, and the search operation will EDUCATE CLASSICS LEISURE NONE The timer will be cancelled. time. (1 minute ~ 99 minutes) appear for about 4 seconds. start. Once timer (“ ” indicator): Daily timer: 4 “SLEEP” will appear. If the RDS signals are very weak, station names may DRAMA OTHER M JAZZ TP ? Notes: Once timer play works for one time only at a preset time. The timer operates at the same time every selected 5 The unit will enter the power stand-by mode not be stored in memory. CULTURE WEATHER COUNTRY TA day. Cancel the daily timer when it is not in use. Station name (PS) Programme type (PTY) ? The same station name can be stored in different ? If the display has stopped A ashing, start again from SCIENCE FINANCE NATION M Daily timer (“DAILY” indicator): automatically after the preset time has elapsed. The step 2. If the unit ? nds a desired programme type, the channels. Daily timer play works at the same preset time every day Notes: volume will be turned down 1 minute before the sleep In a certain area or during certain time periods, the corresponding channel number will lit for about 8 sec- VARIED CHILDREN OLDIES operation ? nishes. ? onds, and then the station name will remain lit. that we set. For example, set the timer as a wake-up call ? When performing timer playback using another unit station names may be different. every morning. connected to the USB terminal or AUDIO IN jack, se- To con? rm the remaining sleep time: ? If you want to listen to the same programme type of 1 While “SLEEP” is indicated, press the SLEEP button. another station, press the RDS PTY button while the Using the once timer and daily timer in combination: lect “USB” or “AUDIO IN” or “LINE IN” in step 5. This Notes for RDS operation channel number or station name is A ashing. The unit In this example, the clock is set for the 24-hour (0:00) display. Frequency Radio text (RT) ¦ will look for the next station. 1 Press the ON/STAND-BY button to turn the power on. For example, use the once timer to listen to a radio pro- unit will turn on or enter the power stand-by mode au- To cancel the sleep operation: Press the ON/STAND-BY button while “SLEEP” is tomatically. However, the connected unit will not turn If any of the following events occur, it does not mean If no station can be found, “NOT FOUND” will appear 2 Press the CLOCK/TIMER button. gramme, and use the daily timer to wake up. When tuning in to a station other than an RDS station or to that the unit is faulty: ? for 4 seconds. 1 Set the daily and once timer (pages 18 - 19). on or off. indicated. To cancel the sleep operation without setting the an RDS station which sends weak signal, the display will “PS”, “No PS” and a station name appear alternately, 3 Within 10 seconds, press the ENTER button. To adjust ? To stop the timer playback, follow step “Cancelling unit to the stand-by mode, proceed as follows. the day, press the While “SLEEP” is indicated, press the SLEEP button. or button and then press the 1 change in the following order: ? and the unit does not operate properly. If you select the traf? c programme: ENTER button. 1 minute or more the timer setting” of this page. 2 Within 5 seconds, press the “0” button twice until If you select the traf? c programme (TP) in step 3, “TP” If a particular station is not broadcasting properly or a 4 Press the or button to select 24-hour or 12-hour ? will appear. Daily timer Once timer Checking the timer setting: “SLEEP 00” appears. No PS No PTY station is conducting tests, the RDS reception function (This does not mean that you can listen to the traf? c infor- display and then press the ENTER button. 1 Turn the power on. Press and hold the CLOCK/TIMER may not work properly. mation at that time.) The 24-hour display will appear. Start Stop Start Stop When you receive an RDS station whose signal is too button. To use timer and sleep operation together ? When the traf? c information is broadcast, “TA” will appear. (0:00 - 23:59) ¦ FM 98.80 MHz No RT weak, information like the station name may not be 2 Within 10 seconds, press the or button to select displayed. The 12-hour display will appear. ¦ Timer playback “Once” or “Daily”, and press the ENTER button. Sleep and timer playback: “No PS”, “No PTY” or “No RT” will A ash for about 5 (AM 12:00 - PM 11:59) 3 Within 10 seconds, press the or button to select For example, you can fall asleep listening to the radio and seconds, and then the frequency will be displayed. The 12-hour display will appear. Before setting timer: “Timer Call”, and press the ENTER button. wake up to CD the next morning. ? Using the Auto Station Programme ¦ Notes for radio text: (AM 0:00 - PM 11:59) Check that the clock is set to the correct time. If it is Cancelling the timer setting: 1 Set the sleep time (see above, steps 1 - 5). Memory (ASPM) The ? rst 14 characters of the radio text will appear for 4 ? ? 5 To adjust the hour, press the or button and then not set, you cannot use the timer function. 1 Turn the power on. Press and hold the CLOCK/TIMER 2 While the sleep timer is set, set the timer playback While in the ASPM operation mode, the tuner will auto- seconds and then they will scroll across the display. press the ENTER button. Press the or button once ? For timer playback: Plug in USB or load discs or dock button. (steps 2 - 9, page 17). If you tune in to an RDS station which is not broadcast- matically search for new RDS stations. Up to 40 stations ? ing any radio text, “No RT” will be displayed when you to advance the time by 1 hour. Hold it down to advance iPod to be played. 2 Within 10 seconds, press the or button to select can be stored. switch to the radio text position. continuously. “Once” or “Daily”, and press the ENTER button. Sleep timer Timer playback End time 1 Press the TUNER button (remote control) or FUNC- While radio text data is received or when the text con- 6 To adjust the minutes, press the or button and 3 Within 10 seconds, press the or button to select setting setting TION button (main unit) repeatedly to select TUNER ? tents change, “RT” will be displayed. then press the ENTER button. Press the or button 1 Press the ON/STAND-BY button to turn the power on. “Timer Off”, and press the ENTER button. Timer will be function. once to advance the time by 1 minute. Hold it down to 2 Press and hold the CLOCK/TIMER button. cancelled (the setting will not be cancelled). 1-99 minutes Desired time 2 Press and hold the RDS ASPM button. ¦ To recall stations in memory advance the time by 5 minutes interval. 3 Within 10 seconds, press the or button to select Reusing the memorised timer setting: 1 After “ASPM” has A ashed for about 4 seconds, To con? rm the time display: “Once” or “Daily”, and press the ENTER button. Sleep operation will Timer playback start scanning will start (87.50 - 108.00 MHz). To specify programmed types (news, sports, traf? c Press the CLOCK/TIMER button. The time display will ap- 4 Within 10 seconds, press the or button to select The timer setting will be memorised once it is entered. To automatically stop time programme, etc..) and select stations (PTY search): pear for about 5 seconds. “Timer Set”, and press the ENTER button. reuse the same setting, perform the following operations. Turn the power on. Press and hold the CLOCK/TIMER 1 1 Press the TUNER button (remote control) or FUNCTION Note: 5 To select the timer playback source (CD, TUNER, button. button (main unit) repeatedly to select TUNER function. When power supply is restored after unit is plugged in again USB, iPod, AUDIO IN, LINE IN), press the or 2 Within 10 seconds, press the or button to select button. Press the ENTER button. 2 Press the RDS PTY button. or after a power failure, reset the clock. “Once” or “Daily”, and press the ENTER button. 2 When an RDS station is found, “RDS” will appear When you select the tuner, select a station by pressing for a short time and the station will be stored in To readjust the clock: the or button, and then press the ENTER but- 3 Within 10 seconds, press the or button to select memory. Perform “Setting the clock” from step 1. If the “Clock” does ton. If a station has not been programmed, “No Preset” “Timer On” , and press the ENTER button. not appear in step 2, step 4 (for selecting the 24-hour or 12- will be displayed and timer setting will be cancelled. 4 Press the ON/STAND-BY button to enter the power hour display) will be skipped. 6 To adjust the day, press the or button and then stand-by mode. “SELECT” and “PTY TI” will appear alternately for about To change the 24-hour or 12-hour display: press the ENTER button. 6 seconds. 3 After scanning, the number of stations stored in 3 Within 6 seconds, press the TUNING ( or ) button to 1 Clear all the programmed contents. [Refer to “Factory 7 Press the ENTER button to adjust the hour. Press the reset, clearing all memory” on page 22 for details.] memory will be displayed for 4 seconds, and then select the programme type. or button and then press the ENTER button. “END” will appear for 4 seconds. 2 Perform “Setting the clock” from step 1 onwards. 8 To adjust the minutes, press the or button and then press the ENTER button. 9 Set the time to ? nish as in steps 7 and 8 above. 10 Adjust the volume using the VOLUME control, and then Each time the button is pressed, the programme type will press the ENTER button. To stop the ASPM operation before it is complete: appear. If the button is held down for more than 0.5 sec- 11 Press the ON/STAND-BY button to enter the power Press the RDS ASPM button while it is scanning for stations. onds, the programme type will appear continuously. stand-by mode. “TIMER” indicator lights up. The stations which are already stored in memory will be kept there. 16 17 18 19 Enhancing your system Troubleshooting chart Troubleshooting chart (continued) Troubleshooting chart (continued) Speci? cations Speci? cations (continued) The connection lead is not included. Purchase a commer- If something is wrong with this product, check the following ¦ Open Accessory ¦ USB ¦ Factory reset, clearing all memory As part of our policy of continuous improvement, SHARP CD player Tuner cially available lead as shown below. before calling your authorised SHARP dealer or service reserves the right to make design and speci? cation chang- ¦ ¦ centre. 1 Press the ON/STAND-BY button to turn the power on. Symptom Possible cause Symptom Possible cause es for product improvement without prior notice. The per- Type Single disc multi-play compact disc Frequency range FM: 87.5 - 108 MHz General No sound is The device is not playing. Device cannot be Is there any MP3/WMA ? le 2 Press FUNCTION button (main unit) repeatedly or formance speci? cation ? gures indicated are nominal val- player ¦ ? ? ? ? AUDIO/LINE (INPUT) button (remote control) to enter ues of production units. There may be some deviations Preset 40 (FM station) produced. ? The device is not properly detected. available? connected to the unit. Is the device properly Audio In mode. from these values in individual units. Signal readout Non-contact, 3-beam Symptom Possible cause The AC power lead of the ? 3 Press button (main unit) once. semiconductor laser pickup ? connected? ¦ Speaker (XL-HF202PH) A power failure occurred. unit is not plugged in. Is it an MTP device? 4 Press and hold button (main unit) until “RESET” appears. General D/A converter Multi bit D/A converter ? The clock is not set to ? ? ¦ the correct time. Reset the clock. (Refer Device will not The device is not making Does the device contain Frequency 20 - 20,000 Hz page 18) ? charge. ? full contact with the USB ? AAC ? le only? Power source AC 220 - 240 V ~ 50/60 Hz response Type 2-way type speaker system When a button is Set the unit to the power terminal. 2.5 cm (1”) Dome-Tweeter ? ? ? Playback does not ? Is it a copyright protected Power Power on: 52 W Dynamic range 90 dB (1 kHz) 12 cm (4-3/4”) woofer pressed, the unit does stand-by mode and then start. WMA ? le? not respond. turn it back on. iPod, iPhone or iPad Is it a false MP3 ? le? consumption Power stand-by: 0.4 W (*) Maximum input 100 W If the unit still ¦ ? Caution: Dimensions Width: 215 mm (8 - 1/2”) ¦ USB (MP3 / WMA) power Portable audio ? malfunctions, reset it. ? Wrong time display. ? Is Variable Bitrate ? le This operation will erase all data stored in memory includ- Height: 96 mm (3 - 4/5”) Rated input power 50 W player, etc. (Refer page 22) Symptom Possible cause ? Wrong ? le name being played back? ing clock, timer settings and tuner preset. Depth: 335 mm (13 - 1/5”) USB host Complies with USB 1.1 (Full No sound is heard. The volume level set to ? No sound is ? The iPod, iPhone or iPad is display. ? Is the File Name written interface ? Speed)/2.0 Mass Storage Impedance 4 ohms ? ? in Chinese or Japanese Weight 2.6 kg (5.7 lbs.) “Min”. produced. not playing. Class. Dimensions Width: 148 mm (5-13/16”) The headphones are not The iPod, iPhone or iPad is characters? ¦ Before transporting the unit Frequency band 2.400GHz - 2.480GHz Height: 262 mm (10-5/16”) ? ? ? Support Bulk only and CBI Audio cable (not supplied) connected. not properly connected to Compatible A2DP (Advanced Audio Distribution protocol. Depth: 203.5 mm (8”) The speaker wires are not the unit. Remove all devices connected to the unit. Then, set the ? Tuner unit to the power stand-by mode. Carrying the unit with Bluetooth Pro? le Pro? le), AVRCP (Audio/Video Support ? le MPEG 1 Layer 3 Weight 2.5 kg (5.4 lbs.)/each connected. ? Is the AC power lead of the ¦ Remote Control Pro? le) ? Listening to the playback sounds of ? The unit is too for from the unit plugged in? other devices left connected or discs left inside might dam- Bluetooth 2.1 +EDR ? WMA (Non DRM) ¦ Bluetooth stereo audio Symptom Possible cause age the unit. Bitrate support MP3 (32 ~ 320 kbps) Speaker (XL-HF302PH) portable audio player, etc. source device. ? iPod, iPhone or iPad ? The iPod, iPhone or iPad is ( * ) This power consumption value is obtained when the demon- ? WMA (64 ~ 160 kbps) ¦ The unit is not paired with will not charge. not making full contact with ? The radio makes ? The unit placed near a TV ? 1 Use a connection lead to connect the portable audio ? the Bluetooth stereo audio the connector. unusual noises or computer. Care of discs stration mode is cancelled in the power stand-by mode. Re- Other ? Maximum total number of MP3/ Type 2-way type speaker system player, etc. to the AUDIO IN socket. source device. ? Using iPod (3rd continuously. ? The FM aerial is not ¦ fer to page 4 to cancel the demonstration mode. WMA ? les is 65025. 2.5 cm (1”) Dome-Tweeter 2 Press the ON/STAND-BY button to turn the power on. generation). placed properly. Move the Discs are fairly resistant to damage. However mistracking Ampli? er ? Maximum total number of 13 cm (5-1/8”) woofer aerial away from the AC 3 Press the AUDIO/LINE (INPUT) button (remote con- Remote control ? The iPod or iPhone is not power lead if it is located can occur due to accumulation of dirt on the surface. ¦ folders is 999 INCLUSIVE of Maximum input 100 W supported. Refer to page trol) or FUNCTION button repeatedly (main unit) to ¦ nearby. ? Do not mark on the non-label side of the disc from which root directory. power select AUDIO IN function. 10 for compatible models. signals are read. Output power MPO: 100 W (50 W + 50 W) ? The ID3TAG information Rated input power 50 W 4 Play the connected equipment. If volume level of the Symptom Possible cause ? “This accessory is ? The iPhone battery is low. Condensation ? Keep your discs away from direct sunlight, heat, and (10% T.H.D.) supported are TITLE, ARTIST Impedance 4 ohms RMS: 100 W (50 W + 50 W) connected device is too high, sound distortion may ? The remote control ? The AC power lead of the not made to work Please charge the iPhone. ¦ excessive moisture. (10% T.H.D.) and ALBUM only. occur. Should this happen, adjust the volume of the does not operate. unit is not plugged in. with iPhone” or “This ? iPhone is not properly Sudden temperature changes, storage or operation in an ? Always hold the discs by the edges. Fingerprints, dirt, RMS: 66 W (33 W + 33 W) ? Supports ID3TAG version 1 and Dimensions Width: 160 mm (6-5/16”) connected device. ? The battery polarity is accessory is not docked. extremely humid environment may cause condensation or water on the CDs can cause noise or mistracking. (1% T.H.D.) version 2. Height: 280 mm (11-1/16”) wrong. supported by iPhone” Note: The batteriy is dead. appears on iPhone inside the cabinet (CD pickup, etc.) or on the transmitter Clean it with a soft, dry cloth, wiping straight out from the Output terminals Speakers: 4 ohms File system ? Support USB devices with Depth: 289 mm (11-3/8”) To prevent noise interference, place the unit away from ? The distance or angle is screen. on the remote control. Condensation can cause the unit to centre, along the radius. support Microsoft Windows/DOS/FAT Weight 4.2 kg (9.3 lbs.)/each ? malfunction. If this happens, leave the power on with no 20Hz - 20kHz the television. incorrect. disc in the unit until normal playback is possible (about 1 Subwoofer Pre-out (audio signal): 12/FAT 16/ FAT 32. The remote control sensor 2 kbyte block length for sector. ? hour). Wipe off any condensation on the transmitter with a 200 mV/10 k ohms at 70 Hz ? Headphones receives strong light. CD player Headphones: 16 - 50 ohms ¦ ¦ soft cloth before operating the unit. (recommended: 32 ohms) Do not set the volume on to maximum at switch on. NFC / Bluetooth ? ¦ Symptom Possible cause If problem occurs Input terminals Audio In (audio signal): Excessive sound pressure from earphones and head- ¦ 500 mV/47 k ohms phones can cause hearing loss. Symptom Possible cause ? Playback does not ? The disc is loaded upside When this product is subject to strong external interfer- Line in (Analogue input): start. down. Before plugging in or unplugging the headphone, re- ence (mechanical shock, excessive static electricity, ab- ? No sound is heard. The unit is too far from the Playback stops in The disc does not satisfy Maintenance 500 mV/47 k ohms duce the volume. ? ? Bluetooth stereo audio ? the middle or is not ? the standards. normal supply voltage due to lightning, etc.) or if it is oper- Be sure your headphone has a 3.5 mm (1/8”) diameter ated incorrectly, it may malfunction. ? source device. performed properly. ? The disc is distorted or plug and impedance between 16 and 50 ohms. The The unit is not paired with scratched. If such a problem occurs, do the following: Cleaning the cabinet recommended impedance is 32 ohms. ? the Bluetooth stereo audio The unit is located near 1 Set the unit to the stand-by mode and turn the power ¦ Plugging in the headphone disconnects the speakers au- ? Playback sounds are ? Periodically wipe the cabinet with a soft cloth and a diluted ? source device. skipped, or stopped in excessive vibrations. on again. tomatically. Bluetooth sound The unit is too near to the middle of a track. Very dirty disc has been 2 If the unit is not restored in the previous operation, unplug soap solution, then with a dry cloth. ? ? ? is interrupted or a device that generates used. and plug in the unit again, and then turn the power on. Caution: distorted. electromagnetic radiation. ? Condensation has formed Note: Do not use chemicals for cleaning (petrol, paint thin- There is an obstacle inside the unit. ? ? If neither operation above restores the unit, clear all the ner, etc.). It may damage the cabinet. between the unit and the Bluetooth stereo audio memory by resetting it. ? Do not apply oil to the inside of the unit. It may cause source device. malfunctions. Cleaning the CD pickup lens ¦ Poor performance during CD playback (skipping or jumping) can be caused by a dirty or contaminated CD laser pick up lens. If this happens then the use of a commercially available CD lens cleaning disc may restore normal operation. Contact your supplier or local CD software dealer to obtain CD lens cleaning discs. Ensure all included instructions/ documentation are carefully followed. 20 21 22 23 For U.K. and Ireland customers For Australia and New Zealand customers Information on Proper Disposal For Australia and New Zealand customers For U.K. and Ireland customers A.Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin! Used electrical and electronic equipment must be treated separately and in accordance with SHARP WARRANTY legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. FOR LOCATION ENQUIRIES WITHIN Consumer Electronic Products Attention: Your Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. AUSTRALIA product is marked In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. with this symbol. It REGARDING YOUR LOCAL Congratulations on Your Purchase! means that used *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of electrical and This Sharp product is warranted against faults in material and manufacture for the electronic products these separately beforehand according to local requirements. SHARP APPROVED SERVICE CENTRE period as stated in the table below. should not be mixed By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment VISIT OUR WEBSITE AT If service is required during the warranty period, please contact your nearest Sharp NOTES FOR USERS IN THE U.K. AND IRELAND with general and human health which could otherwise arise due to inappropriate waste handling. Approved Service Centre. These repairs would be carried out at no charge to the The mains lead of this product is tted with a non-rewireable Ensure that neither the brown nor the blue wire is connected to household waste. 2. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct There is a separate www.sharp.net.au This warranty does not extend to defects or injuries caused by or resulting from causes (moulded) plug incorporating a13A fuse. Should the fuse need to the earth terminal in your three pin plug. collection system for method of disposal. owner, subject to the conditions specified herein. be replaced, a BSI or ASTA approved BS 1362 fuse marked or For Switzerland: Used electrical or electronic equipment can be returned free of charge to the Before replacing the plug cover, make sure that: these products. and of the same rating as above, which is also indicated on not attributable to faulty parts or the manufacture of the product, including but not the pin face of the plug must be used. If the new d plug contains a fuse, its value is the same as dealer, even if you don't purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch. that removed from the cut-off plug. OR CALL SHARP CUSTOMER CARE limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of Always re t the fuse cover after replacing the fuse. Never use The cord grip is clamped over the sheath of the mains lead B.Information on Disposal for Business Users the plug without the fuse cover tted. and not simply over the lead wires. maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, 1. In the European Union 1300 135 022 software, or any alterations made to the product which are not authorised by Sharp. In the unlikely event of the socket outlet in your home not being IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELEC- If the product is used for business purposes and you want to discard it: compatible with the plug supplied, cut-off the mains plug and t Please contact your SHARP dealer who will inform you about the take-back of the product. You TRICIAN. Please retain your sales documentation, as this should be produced to validate a an appropriate type. SERVICE INFORMATION might be charged for the costs arising from take-back and recycling. Small products (and small (LOCAL CALL COST6 APPLY WITHIN AUSTRALIA) warranty claim. This warranty is in addition to and in no way limits, varies or excludes DANGER: In the unlikely event of your equipment requiring repair, please amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of any implied rights and remedies under any relevant legislation in the country of sale. The fuse from the cut-off plug should be removed and the cut-off contact the dealer or supplier from whom it was purchased. Where plug destroyed immediately and disposed of in a safe manner. this is not possible, please visit our web-site: your used products. SHARP CORPORATION OF AUSTRALIA PTY LTD This warranty does not cover transportation to and from the Sharp Approved Service Under no circumstances should the cut-off plug be inserted else- www.sharp.co.uk/support 2. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct Centre. Goods presented for repair may be replaced by refurbished goods of the same where into a 13A socket outlet as a serious electric shock may Customers without internet access may telephone 0845 method of disposal. 880 0512 during of ce hours (or (01) 676 0648 if telephoning occur. type rather than being repaired. Refurbished parts may be used to repair the goods. To t an appropriate plug to the mains lead, follow the instruc- from lreland). The repair of your goods may result in the loss of user generated data, please ensure tions below: Please note; all calls will be charged at local rate. Information on Battery Disposal SHARP that you have saved this data elsewhere prior to repair. IMPORTANT: Certain replacement parts and accessories may be obtained from The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household The wires in the mains lead are coloured in accordance with the our main parts distributor. Australian customers: Our goods come with guarantees that cannot be excluded following code: WILLOW VALE ELECTRONICS LTD. waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in under the Australian Consumer Law. You are entitled to a replacement or refund Blue : Neutral 0121 766 5414 accordance with legislation. Please contact your local authority for details on the collection and recycling : Live Brown FOR LOCATION ENQUIRIES WITHIN for a major failure and for compensation for any other reasonably foreseeable As the colours of the wires in the mains lead of this product may In the unlikely event of this equipment requiring repair during the schemes. For Switzerland: The used battery is to be returned to the selling point. loss or damage. You are also entitled to have the goods repaired or replaced not correspond with the coloured markings identifying the termi- guarantee period, you will need to provide proof of the date of For other non-EU countries: Please contact your local authority for correct method of disposal of the used purchase to the repairing company. nals in your plug, proceed as follows: NEW ZEALAND if the goods fail to be of acceptable quality and the failure does not amount The wire which is coloured blue must be connected to the plug Please keep your invoice or receipt, which is supplied at the battery. to a major failure. The criteria of a major failure is defined in the Australian terminal which is marked N or coloured black. Consumer Law. Should you require any assistance with a major failure please The wire which is coloured brown must be connected to the time of purchase. REGARDING YOUR LOCAL contact Sharp Customer Care. plug terminal which is marked L or coloured red. SHARP APPROVED SERVICE CENTRE WARRANTY PERIODS VISIT OUR WEBSITE AT Home Theatre Projector 12 months (excluding lamps and air filters) NEW ZEALAND LIMITED 12 months Audio/Home Theatre 59 Hugo Johnston Drive www.sharp.net.nz Microwave Oven 12 months SHARPCORPORATION OF 12 months Steam Oven Refrigerator 24 months Penrose, Auckland CONTACT YOUR SELLING DEALER/RETAILER DVD/Blu-ray 12 months AUSTRALIA PTY. LIMITED OR CALL Air Conditioner 60 months Huntingwood NSW 2148 Portable Air Conditioner 12 months SHARPCORPORATION OF SHARP CUSTOMER SERVICES LCD Television 12 months ABN40003039 405 TELEPHONE: 09 573 0111 Air Purifier 12 months 1Huntingwood Drive 24 months Vacuum Cleaner FACSIMILE: 09 573 0113 SPform 040 (JUNE 2012) SHARP CORPORATION OF NEW ZEALAND LIMITED IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand SPform019(AUGUST 2011) 24 25 26 27 TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace- ment, of this product subject to the conditions listed below:- 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. 2. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the course of a business, trade or profession. 3. T Service Facility within one year from the date this product was purchased. Proof of purchase must be provided. 4. The guarantee does not cover carriage costs, audio tapes, compact discs, iPod, iPhone, iPad, USB devices or batteries. 5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased. Where this is not possible, please contact the Sharp Customer Information Centre on the telephone number given below. 6. No person has any authority to vary the terms or conditions of this guarantee. 7. This guarantee is offered as an additional to your statutory rights, and does not affect these rights in any way. If you have any dif operating this product, or would like information on other Sharp products, please telephone the Sharp Customer Information Centre on the number given below. Sharp Customer Information Centre - Telephone 0845 880 0512 (or (01) 676 0648 if telephoning from Ireland) Customer support website address - www.sharp.co.uk/support 28 2013-08-06 08:56:26 XL-HF202-302_OM_SUK_EN_A1.indd 2 2013-08-06 08:56:26 XL-HF202-302_OM_SUK_EN_A1.indd 2