Калькулятор CITIZEN SDC-320II. Инструкция на русском языке

DESKTOP
CALCULATOR
SDC-320II
Instruction Manual
Manuel d’instructions
Manual de Instrucciones
Livro de Especificacoes
Anweisungshandbuch
Инструкция по зксплуатции
Instrnkcja Obslugi
?????
Istruzioni all’Uso
Manual
Gebruiksaanwijzing
Peraturan pemakaian
???????? ????
SDC-320II
The  unit complies with  the
requirements of Directive
89 / 336 / EEC as amended
by 93 / 68 / EEC
Printed in China                     HDBMD852127  XXX
??: D852_Cover_HDBMD852127.doc   ??:  ? 1/2 ?
????: 8/27/2007 2:50:00 PM

*  POWER SUPPLY           English
CITIZEN model SDC-320II is a dual-powered (high power solar + back-up
battery) calculator operative under any lighting conditions.
-Auto power-off function-
The calculator switches the power off automatically if there has been no
key entry for about 9 minutes.
-Battery change-
If the back-up battery needs to be changed, open the lower cabinet to
remove the old battery and insert a new battery in the indicated polarity.
After changing battery, please use a metal, elliptical object to press the
RESET pad on printed circuit board.
*  KEY INDEX              English
ON
[  • ] : Power on / Clear Entry / Clear key
CE      C
[00>0] : Right shift key
[M+] : Memory plus key
[M–] : Memory minus key
[+/–] : ±Sign change key
[ M ] : Memory recall / Memory clear key
R
C
[MU] : Mark-up / Mark-down Key
[GT] : Grand total key
[RATE] : Tax rate setting key
] : ? Price with Tax key
STORE
[ TAX+
? To store tax rate when pressing [RATE] and [+TAX] keys
RECALL
] : ? Price without Tax key
[ TAX?
? To recall tax rate when pressing [RATE] and [-TAX] keys
A 0 2 3 F  Decimal place selection switch
– F –   Floating decimal mode
– 0 – 2 – 3 –  Fixed decimal mode
– A –   ADD–mode automatically enters the monetary decimal in
addition and subtraction calculations
5/4
Round-up / Round-off / Round-down switch
The Signs Of The Display Mean The Following:
MEMORY:Memory  TAX:Amount of tax
–MINUS:Minus(or negative)   –TAX:Price excluding tax
ERROR:Overflow-error  +TAX:Price including tax
GT:Grand total   RATE:Tax rate setting
%:Tax rate stored
*  OPERATION EXAMPLES     English
1.Calculation Examples
Before performing each calculation, press the [  ON • ] key two times.
CE     C
Example   Key  operation  Display
A 0 2 3 F  2 x 3 = 6   2 [x] 2 [  ON • ] 3 [=]   GT  6.
CE
7 x 9 = 63   7 [?] [x] 9 [=]  C  GT  63.
300 x 27% = 81   300 [x] 27 [%]   GT  81.
11.2    x 100% = 20%  11.2 [?] 56 [%]   GT  20.
56
300+(300 x 40%)=420 300 [+] 40 [%]   GT  420.
300–(300 x 40%)=180 300 [–] 40 [%]   GT  180.
1400 x 12% = 168   1400 [x] 12 [%]   GT  168.
6 + 4 + 7.5 = 17.5   6 [+] 4 [+] 7.5 [=]   GT  17.5
5 x 3 ? 0.2 = 75   [  ON • ] [  ON • ] 5 [x] 3 [?]
CE     C  CE  C     GT  75.
0.2 [=]
8 ? 4 x 3.7 + 9 =16.4  8 [?] 4 [x] 3.7 [+] 9 [=]   GT  16.4
5  = 625   5 [x] [=] [=] [=]   GT  625.
4
1 / 2 = 0.5   2 [?] [=]   GT  0.5
1
(2  x     3 +  10)   = 0.0625  2 [x] 3 [+] 10 [?] [=]   GT 0.0625
A 0 2 3 F  $14.90+$0.35–$1.45+ 1490 [+] 35 [–] 145      145.
$12.05=$25.85   [+] 1205 [=]   GT  25.85
5/4
2.Memory Calculation
A 0 2 3 F (12 x 4) – (20 ? 2)   [M ] [M ] [  ON • ]   0.
R
R
C
C
= 38        CE  C
5/4         12 [x] 4 [M+] 20 [?] 2 [M–]  MEMORY  10.
[M ]
R
C           MEMORY  38.
R
[M ] [ CE ON • ]   0.
C
C
3.Constant Calculation
A 0 2 3 F  2 + 3 = 5   2 [+] 3 [=]   5.
4 + 3 = 7   4 [=]        7.
3 x 4 = 12   3 [x] 4 [=]   12.
3 x 6 = 18   6 [=]        18.
4.Overflow Error Clear
123456789012 x 10000  1234567890123 [00>0]     123'456'789'012.
= 1'234.56789012 x 10 12  [x] 10000 [=]     ERROR 1’234.56789012
[  ON • ] [  ON • ]      0.
CE     C  CE  C
5.Price Mark-Up & Down Calculation
A 0 2 3 F  200+(P x 20%)=P   2000 [?] 20 [MU]   2'500.00
2000    [MU]          500.00
5/4  P=    -   1  20%  =2'500.00
2500–2000 = 500.00
200–(P x 20%)=P   2000 [?] 20 [+/–] [MU]   1'666.67
2000
P=  =1'666.67
1+   20%
18000    -    15000  x100%   18000 [–] 15000 [MU]   20.00
15000
= 20.00%
6.GT-Memory
Pressing [GT] twice before you operate GT function.
A 0 2 3 F  20 + 10 = 30   [GT] [GT] 20 [+] 10 [=]  GT  30.
45 – 25 = 20   45 [–] 25 [=]   GT  20.
50 x 3 = 150   50 [x] 3 [=]   GT  150.
total = 200   [GT]    GT  200.
200 x 15% = 30   [x] 15 [%]   GT  30.
200 + (200 x 15%) =  [GT]   GT  230.
230       [GT]           230.
[  ON • ]       0.
CE     C
All calculation results are automatically accumulated in GT.
7.Tax Calculation
100+TAX(3%)    3 [RATE] [+TAX]   %
= 103                      +TAX  3.
100 [+TAX]        103.
Tax sum = 3   [+TAX]       TAX
3.
3 = Tax sum              103 = Tax inclusive value
206–TAX(3%)    [  ON • ] [RATE] [–TAX]   %
= 200       CE  C          –TAX    3.
206 [–TAX]        200.
Tax sum = 6   [–TAX]       TAX
6.
6 = Tax sum              200 = Tax exclusive value

*  ALIMENTATION           Francais
CITIZEN  modele SDC-320II a double alimentation (energie solaire
haute+pile de soutien d’alimentation) qui peut operer sous n’importe
conditions de lumiere.
-Arret d’alimentation automatique -
L’alimentation de cette calculatrice se coupe automatiquement si laissee
allumee et non utilisee pendant environ 9 minutes.
-Remplacement de pile-
Lorsque il faut remplacer la pile,enleve les vis de l’etui bas et remplacer la
pile usee et inserer une nouvelle pile selon  la polarite indiquee.  Apres
avoir change la batterie, utilisez un objet elliptique en metal, pour appuyer
sur le coussinet de REAJUSTEMENT sur le panneau du circuit imprime.
*  SIGNIFICATION DES TOUCHES   Francais
ON
[  • ] : Bouton de Mise en marche / d’annulation / Touche d’annulation de l’Entree
CE      C
[00>0] : Touche de correction
[M+] : Touche de memoire plus
[M–] : Touche de memoire moins
R
[ M ] : Rappeler la memoire / Effacer la memoire
C
[+/–] : ± Touche de changement de Signe
[MU] : Touche de hausse / baisse du Prix
[GT] : Touche de Total General
[RATE] : Touche de Reglage du Taux de la Taxe
STORE
] : ?Touche de Prix avec la Taxe ?Sauvegarder le taux de la taxe en
appuyant sur [RATE] (TAUX) et [+TAX] (TAXE)
[ TAX+
RECALL
] : ?Touche de Prix sans la Taxe ?Rappeler le taux de la taxe en
[ TAX?
appuyant sur les touches [RATE] (TAUX) et [–TAX] (TAXE)
A 0 2 3 F  Bouton de selection d’emplacement de la Decimale
– F –   Mode de Decimale Flottante
– 0 – 2 – 3 –  Mode de Decimale Fixe
– A –   Le mode ADD entre automatiquement la decimale
monetaire en mode de calculs d’addition et de
soustraction
5/4
Bouton d’Arrondi superieur / Arrondi / Arrondi inferieur
Les signes de l’Affichage signifient ce qui suit:
MEMORY:Memoire  TAX:Montant de la taxe
–MINUS:Moins(ou negatif)   –TAX:Prix excluant la taxe
GT:Total General   +TAX:Prix incluant la taxe
ERROR:Erreur-Debordement  %:Taux de la taxe stockee
RATE:Reglage du taux de la taxe
*  EXEMPLES D’OPERATIONS   Francais
1.Exemples de calculs
ON
Avant d’effectuer chaque calcul, pressez la touche [  • ] 2 fois.
CE  C
Exemple   Touche d’Operation  Affichage
A 0 2 3 F  2 x 3 = 6   2 [x] 2 [  ON • ] 3 [=]   GT  6.
CE
7 x 9 = 63   7 [?] [x] 9 [=]  C  GT  63.
300 x 27% = 81   300 [x] 27 [%]   GT  81.
11.2   x 100% = 20%  11.2 [?] 56 [%]   GT  20.
56
300+(300 x 40%)=420 300 [+] 40 [%]   GT  420.
300–(300 x 40%)=180 300 [–] 40 [%]   GT  180.
1400 x 12% = 168   1400 [x] 12 [%]   GT  168.
6 + 4 + 7.5 = 17.5   6 [+] 4 [+] 7.5 [=]   GT  17.5
5 x 3 ? 0.2 = 75   [  ON • ][  ON • ] 5 [x] 3 [?]
CE     C  CE     C  GT  75.
0.2 [=]
8 ? 4 x 3.7 + 9 =16.4  8 [?] 4 [x] 3.7 [+] 9 [=]   GT  16.4
4
5  = 625   5 [x] [=] [=] [=]   GT  625.
1 / 2 = 0.5   2 [?] [=]   GT  0.5
1
(2  x     3 +  10)   = 0.0625  2 [x] 3 [+] 10 [?] [=]   GT 0.0625
A 0 2 3 F  $14.90+$0.35–$1.45+ 1490 [+] 35 [–] 145   145.
$12.05=$25.85   [+] 1205 [=]   GT  25.85
5/4
2.Calcul avec memoire
A 0 2 3 F  (12 x 4) – (20 ? 2)   [M ] [M ] [  ON • ]
R
R
= 38    C  C  CE  C       0.
5/4         12 [x] 4 [M+] 20 [?] 2 [M–]  MEMORY  10.
R
[M ]         MEMORY  38.
C
[M ] [ CE ON • ]   0.
R
C
C
3.Constant Calcul
A 0 2 3 F  2 + 3 = 5   2 [+] 3 [=]   5.
4 + 3 = 7   4 [=]        7.
3 x 4 = 12   3 [x] 4 [=]   12.
3 x 6 = 18   6 [=]        18.
4.Correction et depassement-erreur
123456789012 x 10000  1234567890123 [00>0]  123'456'789'012.
= 1'234.56789012 x 10 12  [x] 10000 [=]     ERROR 1’234.56789012
[  ON • ] [  ON • ]      0.
CE     C  CE  C
5.Calcul de la hausse et de la baisse du prix
A 0 2 3 F  200+(P x 20%)=P   2000 [?] 20 [MU]   2'500.00
2000    [MU]          500.00
5/4  P=    -   1  20%  =2'500.00
2500–2000 = 500.00
1'666.67
200–(P x 20%)=P   2000 [?] 20 [+/–] [MU]
2000
P=  =1'666.67
20%
1+
18000    -    15000  x100%   18000 [–] 15000 [MU]   20.00
15000
= 20.00%
6.Memoire TG
Pressez [GT] (Total General) deux fois avant d’utiliser la fonction TG.
A 0 2 3 F  20 + 10 = 30   [GT] [GT] 20 [+] 10 [=]  GT  30.
45 – 25 = 20   45 [–] 25 [=]   GT  20.
50 x 3 = 150   50 [x] 3 [=]   GT  150.
total = 200   [GT]    GT  200.
200 x 15% = 30   [x] 15 [%]   GT  30.
200 + (200 x 15%) =  [GT]   GT  230.
230       [GT]           230.
ON
[  • ]           0.
CE     C
Tous les resultats des calculs sont ajoutes automatiquement au Total General.
7.Calcul de l’impot
100+TAX(3%)    3 [RATE] [+TAX]   %
= 103                           3.
100 [+TAX]   +TAX  103.
Le montant de la taxe = 3   [+TAX]   TAX
3.
3 = Le montant de la taxe          103 = Valeur avec avec taxe
206–TAX(3%)    [  ON • ] [RATE] [–TAX]  %
= 200          CE     C    –TAX    3.
206 [–TAX]      200.
Le montant de la taxe = 6   [–TAX]   TAX
6.
6 = Le montant de la taxe          200 = Valeur hors taxe
File name: D852_French  vision : 04/02/12