Мотоцикл BMW R1150RT ABS (2001). Инструкция на английском языке

Maintenance BMW Integral ABS
R 1150 RT
BMW Motorrad
After Sales

Published by:      © BMW Motorrad
After Sales
UX-VS-2
All rights reserved. Not to be reprinted, translated or duplicated either wholly or in part without prior written
permission.
Errors and omissions excepted; subject to technical amendment.
Produced in Germany 01/01

BMW Motorrad
Maintenance schedule
R 1100 S EVO / R 1150 R / R 1150 RT
BMW Inspection   miles)  BMW Service  (6,000 miles)  BMW Inspection  every 20,000 km   (12,000 miles)  Annual Service
Customer                             Registration No.
Order No.                            Mechanic’s signature                      at 1 ,000 km   (600  10,000 km   BMW
Read the fault code memory with the BMW MoDiTeC
[Integral ABS] perform bleed test with BMW MoDiTeC
Change oil while at regular operating temperature and replace the oil filter element
If the motorcycle is ridden only for short distances or outside temperatures are below 0 °C: at the
latest every 3,000 km (1,800 miles)* )
Change oil in gearbox while at operating temperature                                              every
)
every 2 years* at the latest
2years
Change oil in rear wheel drive while at operating temperature
if necessary, clean inductive sensor on rear wheel                                                every
every 40,000 km (24,000 miles) or at the latest every 2 years* )                          40,000
2years
Replace fuel filter * )
Normally every 40,000 km (24,000 miles), if fuel is of poor quality every 20,000 km (12,000 miles)  40,000
Check the battery fluid level, if necessary top up with distilled water
Clean and grease battery poles if necessary
Replace intake air filter element
In very dirty and dusty operating conditions, replace every 10,000 km (6,000 miles) or even more
frequently if necessary * )
Replace Poly-V belt * )
Replace the Poly-V belt every 60,000 km (36,000 miles); do not adjust it                  60,000
Check brake fluid level at front and rear
Check operation of brake system and freedom from leaks; repair/replace items if necessary* )
Examine brake pads and discs for wear, replace as necessary* )
[Without ABS] change brake fluid every twelve months
[Integral ABS] change bake fluid in wheel circuit every 12 months
[Integral ABS] change brake fluid in control circuit every 2 years* )                             every
2years
[Integral ABS] perform bleed test with BMW MoDiTeC
Check clutch fluid level
Change the clutch fluid*  )
every 2 years at the latest                                                                       every
2years
Check tightness of rear wheel studs
Check rear wheel bearing play by tilting wheel
Check swinging arm bearings (freedom from play), adjust if necessary * )
Grease the side stand pivot
Check function of side stand contact switch
Check condition of spark plugs
Replace spark plugs
Tighten cylinder head nuts
Check/adjust valve clearances
Check that the throttle cable moves freely and is free of kinks and chaffing, replace if necessary * )
Check throttle-cable play
check synchronisation, repair leaks if necessary * )
Final inspection with road safety and functional check:
–  Condition of tyres and wheels, tyre pressures
–  Lights and signalling equipment, telltale and warning lights, instruments,
–  clutch, gearshift mechanism, hand brake and foot brake, steering,
–  if necessary, test drive
* )  Charged as an additional item
Order No. 01 71 0 029 614                   UX-VS-2, 12.2000                              Printed in Germany