Видеорегистратор HYUNDAI H-DVR09HD. Инструкция на русском языке

H-DVR09HD
АВТОМОБИЛЬНЫЙ
CAR VIDEO RECORDER                             ВИДЕОРЕГИСТРАТОР
Instruction manual                Руководство по эксплуатации

Instruction Manual                                                                                                        Instruction Manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
Utilization of the product
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Important safeguards                Controllers
•   Read carefully through the manual to   Front panel
familiarize yourself with this unit.
•   Keep this manual handy as a reference   1  2   3
for operating procedures and precautions. Do
not allow persons who have not read through
this manual to use this unit.
•   Connect this unit only to the vehicle lighter
jack of your car with +12-24 V DC power. If the
voltage is too high, it may cause damage to
this unit.
•   Careful handling of the unit can prolong
its operation life.
•   Due to variety of car lighter jack sizes
depending of vehicle type, ensure that this unit
is properly contacted in the lighter socket.
•   The DC adapter and car lighter socket
should be used only with original accessories
included. The Manufacturer is not responsible
for possible damage of this unit cause by
using other accessories than provided by
Manufacturer.                       1. LED light
•   Should this product fail to operate   2. Display
properly, contact your local dealer.  3. Camera
2                                                                                                                                                  3

Instruction Manual                                Instruction Manual
Right panel                         Power and charging
To charge the battery of this unit connect
4    5   6    7
its USB port to the PC with the supplied USB
cable; or connect it to a car lighter socket
with the supplied car adapter. The power icon
on the upper right corner of the display
indicates the remaining battery power.
4.    button                          Rotary display
5. MODE button                        To improve the display angle for viewing it,
6.    button                        you can rotate the display in one plane relative to
7. HDMI output                      the hinge axis 180  leftwards and 90  rightwards.
Left panel                          Get ready for record
•  Before you start recording, insert a MicroSD
8    9   10   11             memory card into the memory card slot of this
unit until a click. Insert the card with correct side.
•  Press    button to switch the unit on.
“FULL HD” will be shown in the left upper
corner of the display showing that the unit is
ready for recording.
MicroSD capacity supported: up to 32
8.    button                        Gb. For correct and satisfactory operation,
9.    button                        licensed MicroSD memory cards of famous
10.    button                       brands should be used with this unit. Avoid
11. USB port                        using memory cards of unknown brands.
Not indicated: RESET hole button (bottom),   Recording
Memory card slot (back side)          •  When the unit is turned on, press
button to start recording video. The unit will
save video files automatically after each 2, 5
Operations                        or 10 minutes. When the memory card is filled,
old files will be deleted and the new files will
Mounting                          be recorded instead. Press    button to stop
•  Insert the fixing pins on the top of the   and to continue recording.
stand into the bracket holding holes in the   •  Press    or    button to zoom in or
bottom of the unit and move the unit backward   out.
until a click to fix it tightly to the bracket.  •  Press repeatedly    button to select a
•  Press the suction cup to a surface in the   flash mode.
car, then push the pressure valve down. Make   •  You can record video while charging the
sure the stand is fixed properly to the surface.  unit. Connect this unit to a car lighter socket to
•  You can adjust the angle of the stand by   start charging it. The unit will be turned on and
loosening the upper and lower washers and   start video recording at the same time when
bending the assembly knots.         your car engine is started. It would save video
•  To unmount the stand, lift the pressure   files automatically and be switched off after the
valve, then lift the plastic ear on the suction cap.  car is stopped.
2                                                                          3