Усилитель мощности PIONEER GM-7200M. Инструкция на русском языке

MONO POWER AMPLIFIER                                                  ENGLISH
AMPLIFICATEUR DE PUISSANCE MONO                                       ESPANOL
DEUTSCH
Owner’s Manual                                                             FRANCAIS
GM-7200M                                                   ITALIANO
Mode d’emploi                          eieeaaa
NEDERLANDS

Contents                             Before Using This Product
Before Using This Product  ...................... 1
If you want to dispose this
In case of trouble  .............................................. 2
About This Product  .......................................... 2  product, do not mix it with
CAUTION ........................................................ 2  general household waste. There
WARNING ........................................................ 2  is a separate collection system
for used electronic products in
accordance with legislation that
Setting the Unit  .......................................... 3
requires proper treatment,
Power Indicator  ................................................ 3  recovery and recycling.
LPF (Low-Pass-Filter) Cut Off Frequency
Control ........................................................ 3
Gain Control ...................................................... 3  Private households in the 25 member states
Bass Boost Control  ............................................3  of the EU, in Switzerland and Norway may
BFC (Beat Frequency Control) Switch  ............ 4  return their used electronic products free of
charge to designated collection facilities or to
a retailer (if you purchase a similar new one).
Connecting the Unit  .................................. 5
For countries not mentioned above, please
Connection Diagram  ........................................ 6  contact your local authorities for the correct
Connecting the Power Terminal ........................ 7  method of disposal.
Connecting the Speaker Terminals  .................. 8  By doing so you will ensure that your
Using the Speaker Input  .................................... 8  disposed product undergoes the necessary
Connecting the Speaker Wires  .......................... 9
treatment, recovery and recycling and thus
prevent potential negative effects on the
Installation ................................................ 10  environment and human health.
Example of installation on the floor mat
or on the chassis  ...................................... 10
Specifications .......................................... 11
1

Thank you for purchasing this PIONEER  WARNING
product. Before attempting operation, be
sure to read this manual.         • Always use the special red battery and ground  ENGLISH
wire [RD-223], which is sold separately. Connect
the battery wire directly to the car battery positive
In case of trouble                     terminal (+) and the ground wire to the car body.
• Do not touch the amplifier with wet hands.
When the unit does not operate properly,  Otherwise you may get an electric shock. Also,
contact your dealer or the nearest autho-
do not touch the amplifier when it is wet.
rized PIONEER Service Station.
• For traffic safety and to maintain safe driving
conditions, keep the volume low enough so that  ESPANOL
About This Product                     you can still hear normal traffic sound.
• Check the connections of the power supply and
This product is an amplifier for the sub-  subwoofer if the fuse of the separately sold bat-
woofer. If both L (left) and R (right) chan-  tery wire or the amplifier fuse blows. Detect the
nels are connected to the RCA input of  cause and solve the problem, then replace the
fuse with another one of the same size and rating.
this product, output is mixed because this
product is a mono amplifier.      • To prevent malfunction of the amplifier and sub-
woofer, the protective circuit will cut the power  DEUTSCH
supply to the amplifier (sound will stop) when an
CAUTION                            abnormal condition occurs. In such a case, switch
the power to the system OFF and check the
Never replace the fuse with one of greater  connection of the power supply and subwoofer.
value or rating than the original fuse. Use  Detect the cause and solve the problem.
of an improper fuse could result in over-  • Contact the dealer if you cannot detect the cause.
heating and smoke and could cause dam-  • To prevent an electric shock or short-circuit
age to the product and injury including  during connection and installation, be sure to   FRANCAIS
burns.                              disconnect the negative (–) terminal of the battery
beforehand.
• Confirm that no parts are behind the panel when
drilling a hole for installation of the amplifier. Be
sure to protect all cables and important equipment
such as fuel lines, brake lines and the electrical
wiring from damage.
• DO NOT allow amplifier to come into contact
with liquids due to, for example, the location  ITALIANO
where the amplifier is installed. Electrical shock
could result. Also, amplifier and speaker damage,
smoke, and overheating could result from contact
with liquids. In addition, the amplifier surface
and the surface of any attached speakers could
become hot to the touch and minor burns could
result.                             NEDERLANDS
2  eieeaaa