Усилитель мощности PIONEER GM-6300F. Инструкция на русском языке

BRIDGEABLE FOUR-CHANNEL POWER AMPLIFIER                               ENGLISH
AMPLIFICATEUR DE PUISSANCE PONTABLE A
QUATRE VOIES                                                          ESPANOL
DEUTSCH
Owner’s Manual                                                             FRANCAIS
GM-6300F                                                  ITALIANO
Mode d’emploi                          eieeaaa
NEDERLANDS

Contents                             Before Using This Product
Before Using This Product  ...................... 1  Thank you for purchasing this PIONEER
Visit our website ................................................ 1  product. Before attempting operation, be
In case of trouble  .............................................. 2  sure to read this manual.
CAUTION.......................................................... 2
CAUTION.......................................................... 2
WARNING ........................................................ 2  If you want to dispose this
product, do not mix it with
general household waste. There
Setting the Unit  .......................................... 3
is a separate collection system
Power Indicator  ................................................ 3  for used electronic products in
Input Select Switch ............................................ 3  accordance with legislation that
Gain Control ...................................................... 4  requires proper treatment,
BFC (Beat Frequency Control) Switch  ............ 4  recovery and recycling.
LPF (Low-Pass Filter)/HPF (High-Pass
Filter) Select Switch  .................................. 4
Private households in the 25 member
Connecting the Unit  .................................. 5  states of the EU, in Switzerland and
Norway may return their used electronic
Connection Diagram  ........................................ 6  products free of charge to designated col-
Connecting the Power Terminal ........................ 7  lection facilities or to a retailer (if you pur-
Connecting the Speaker Output Terminals  ...... 8  chase a similar new one).
Using the Speaker Input  .................................... 8  For countries not mentioned above, please
Connecting the Speakers and Input Wires  ........ 9  contact your local authorities for the cor-
rect method of disposal.
Installation ................................................ 11  By doing so you will ensure that your dis-
Example of installation on the floor mat   posed product undergoes the necessary
or on the chassis  ...................................... 11  treatment, recovery and recycling and thus
prevent potential negative effects on the
Specifications .......................................... 12  environment and human health.
Visit our website
Visit us at the following site:
• Register your product. We will keep the
details of your purchase on file to help
you refer to this information in the event
of an insurance claim such as loss or
theft.
• We offer the latest information about
Pioneer Corporation on our website.
1

In case of trouble                      If you have any questions or concerns,
please contact your local authorized
When the unit does not operate properly,  Pioneer dealer or call Pioneer customer  ENGLISH
contact your dealer or the nearest autho-  service.
rized PIONEER Service Station.
WARNING
CAUTION
• Always use the special red battery and ground
Never replace the fuse with one of greater  wire [RD-223], which is sold separately. Connect
value or rating than the original fuse. Use  the battery wire directly to the car battery positive  ESPANOL
of an improper fuse could result in over-  terminal (+) and the ground wire to the car body.
heating and smoke and could cause dam-  • Do not touch the amplifier with wet hands.
age to the product and injury including  Otherwise you may get an electric shock. Also,
do not touch the amplifier when it is wet.
burns.
• For traffic safety and to maintain safe driving
conditions, keep the volume low enough so that
CAUTION                            you can still hear normal traffic sound.
• Check the connections of the power supply and
Diagram A - Proper  Diagram B - Improper  speakers if the fuse of the separately sold battery  DEUTSCH
wire or the amplifier fuse blows. Detect the cause
and solve the problem, then replace the fuse with
8 ?              4 ?
+   -           + Speaker -        another one of the same size and rating.
Speaker                          • To prevent malfunction of the amplifier and
speakers, the protective circuit will cut the power
8 ?              4 ?              supply to the amplifier (sound will stop) when an
+   -           +   -              abnormal condition occurs. In such a case, switch
Speaker          Speaker
the power to the system OFF and check the   FRANCAIS
connection of the power supply and speakers.
L+       R-      L+      R-
Detect the cause and solve the problem.
Pioneer         Pioneer
Amplifier       Amplifier        • Contact the dealer if you cannot detect the cause.
• To prevent an electric shock or short-circuit
4 ? Bridged Mode  2 ? Bridged Mode
during connection and installation, be sure to
disconnect the negative (–) terminal of the battery
Do NOT install or use your Pioneer ampli-  beforehand.
fier by wiring speakers rated at 4 ? (or  • Confirm that no parts are behind the panel when  ITALIANO
lower) in parallel to achieve a 2 ? (or  drilling a hole for installation of the amplifier. Be
lower) bridged mode (Diagram B).    sure to protect all cables and important equipment
Amplifier damage, smoke, and overheat-  such as fuel lines, brake lines and the electrical
ing could result from improper bridging.  wiring from damage.
The amplifier surface could also become  • DO NOT allow amplifier to come into contact
with liquids due to, for example, the location
hot to the touch and minor burns could  where the amplifier is installed. Electrical shock
result.                             could result. Also, amplifier and speaker damage,
To properly install or use a bridged mode  smoke, and overheating could result from contact  NEDERLANDS
for a two-channel amplifier and achieve a  with liquids. In addition, the amplifier surface
4 ? load, wire two 8 ? speakers in paral-  and the surface of any attached speakers could
lel with Left + and Right – (Diagram A) or  become hot to the touch and minor burns could
use a single 4 ? speaker. For a four-chan-  result.
nel amplifier, follow the speaker output
connection diagram for bridging as shown
on the back of your amplifier, and wire
two 8 ? speakers in parallel to achieve a 4                            eieeaaa
? load or use a single 4 ? speaker per
channel.
2