Динамик НЧ MOREL Elite Coppersleeve Woofer ECW 638. Инструкция на английском языке

ECW 638
Elite Coppersleeve Woofer,
O 6", O 3" voicecoil, 8?
SPECIFICATIONS
General Data                                               FEATURES
Overall Dimensions       DxH 160mm(6.3")x69mm(2.71")       * Uniflow™ Aluminum diecast chassis
Nominal Power Handling (DIN) P  150W                       * Hybrid™ Neodymium/Ferrite magnet system
Transient Power 10ms         1000W                         * Copper insulated center pole
Sensitivity 2.83V/1M         88dB SPL                      * 3" Large Hexatech™ Aluminum voice coil
Frequency Response           See graph                     * High power handling
Cone Material                Damped Polymer Composite     * High Xmax, Low Qts, Low Fs
Net Weight               Kg  1.2
Electrical Data                                            Unit Dimensions
Nominal Impedance        Z   8?
DC Resistance            Re  5?
Voice Coil Inductance @ 1KHz LBM 0.26mH
Voice Coil and Magnet Parameters
Voice Coil Diameter      DIA  75mm
Voice Coil Height            18mm
HE Magnetic Gap Height   HE  6mm
Max. Linear Excursion    X   ± 6mm
Voice Coil Former            Aluminum
Voice Coil Wire              Hexatech™ Aluminum
Number Of Layers             2
Magnet System Type           Hybrid™ Neodymium/Ferrite
B Flux Density           B   0.8 T
BL Product               BXL 7.45 N.A
T-S Parameters
Suspension Compliance    Cms 0.994 mm/N                    A - Overall diameter           160mm
Mechanical Q Factor      Qms 1.42                          B - Cut out diameter           140mm
Electrical Q Factor      Qes 0.36                          C - Flange thickness               6mm
Total Q Factor           Qts  0.29                         D - Overall height              69mm
Mechanical Resistance    Rms 2.82 Kg/s                     E - Basket depth                63mm
Moving Mass              Mms 16 g                          F - Mounting holes location diameter  152mm
Eq. Cas Air Load (liters)  VAS 19 Lt                       G - 6 Mounting holes, at 60? interval,
Resonant Frequency       Fs  39 Hz                               inner hole diameter     O 4.2mm
Effective Piston Area    SD  119 cm ?
Measured on IEC baffle using Bruel & Kjaer 3144 model microphone.
Morel operate policy of continuous product design improvement, consequently specifications are subject to alteration without prior notice.