Минирояль KURZWEIL Mark X-Pro MG(WH). Инструкция на английском языке

Getting Started Guide
©2009 All rights reserved. Kurzweil ® is a product line of Young Chang Co., Ltd. Young Chang®, Kurzweil ®, V. A. S. T. ®, PC3®, X-Pro,
KDFX®, Pitcher®, and LaserVerb®, KSP8 ™, K2661™, K2600™, K2500™, and K2000™ are trademarks of Young Chang Co., Ltd. All other
products and brand names are trademarks or registered trademarks of their respective companies. Product features and speci?cations are
subject to change without notice.
You may legally print up to two (2) copies of this document for personal use. Commercial use of any copies of this document
is prohibited. Young Chang Co. retains ownership of all intellectual property represented by this document.
910516 – April 2009

The lightning flash with the arrowhead symbol,
CAUTION                              within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
RISK OF ELECTRIC SHOCK                 "dangerous voltage" within the product's
enclosure that may  be of sufficient magnitude
DO NOT OPEN                        to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  The exclamation point within an equilateral
DO NOT REMOVE THE COVER      triangle is intended to alert the  user to the
NO USER SERVICEABLE PARTS INSIDE  presence of important operating and
maintenance (servicing) instructions in the
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL  literature accompanying the product.
IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING:  When  using  electric  products,  basic  precautions  should  7.  The product should be located so that its location or position does
always be followed, including the following:              not interfere with its proper ventilation.
1.  Read all of the Safety and Installation Instructions and Explanation  8.  The product should be located away from heat sources such as
of Graphic Symbols before using the product.          radiators, heat registers, or other products that produce heat.
2.  This product must be grounded. If it should malfunction or break  9.  The product should be connected to a power supply only of the type
down,  grounding  provides  a  path  of  least  resistance  for  electric  described in the operating instructions or as marked on the product.
current to reduce the risk of electric shock. This product is equipped  10. This product may be equipped with a polarized line plug (one blade
with  a  power  supply  cord  having  an  equipment-grounding  wider than the other). This is a safety feature. If you are unable to
conductor and a grounding plug. The plug must be plugged into an  insert the plug into the outlet, contact an electrician to replace your
appropriate  outlet  which  is  properly  installed  and  grounded  in  obsolete outlet. Do not defeat the safety purpose of the plug.
accordance with all local codes and ordinances.
11. The power supply cord of the product should be unplugged from the
DANGER:  Improper  connection  of  the  equipment-grounding  outlet when left unused for a long period of time. When unplugging
conductor can result in a risk of electric shock. Do not modify the  the power supply cord, do not pull on the cord, but grasp it by the
plug provided with the product - if it will not ?t the outlet, have a  plug.
proper  outlet  installed  by  a  quali?ed  electrician.  Do  not  use  an
adaptor  which  defeats  the  function  of  the  equipment-grounding  12. Care should be taken so that objects do not fall and liquids are not
conductor. If you are in doubt as to whether the product is properly  spilled into the enclosure through openings.
grounded, check with a quali?ed serviceman or electrician.  13. The  product  should  be  serviced  by  quali?ed  service  personnel
when:
3.  WARNING:  This  product  is  equipped  with  an  AC  input  voltage
selector. The voltage selector has been factory set for the mains  A.  The power supply cord or the plug has been damaged;
supply voltage in the country where this unit was sold. Changing  B.  Objects have fallen, or liquid has been spilled into the product;
the voltage selector may require the use of a different power supply  C.  The product has been exposed to rain;
cord or attachment plug, or both. To reduce the risk of ?re or electric
shock, refer servicing to quali?ed maintenance personnel.  D.  The  product  does  not  appear  to  be  operating  normally  or
exhibits a marked change in performance;
4.  Do not use this product near water - for example, near a bathtub,
washbowl, kitchen sink, in a wet basement, or near a swimming  E.  The product has been dropped, or the enclosure damaged.
pool, or the like.                                14. Do not attempt to service the product beyond that described in the
5.  This  product  should  only  be  used  with  a  stand  or  cart  that  is  user  maintenance  instructions.  All  other  servicing  should  be
recommended by the manufacturer.                      referred to quali?ed service personnel.
6.  This product, either alone or in combination with an ampli?er and  15. WARNING: Do not place objects on the product’s power supply
speakers  or  headphones,  may  be  capable  of  producing  sound  cord, or place the product in a position where anyone could trip
levels that could cause permanent hearing loss. Do not operate for  over, walk on, or roll anything over cords of any type. Do not allow
a long period of time at a high volume level or at a level that is  the  product  to  rest  on  or  be  installed  over  cords  of  any  type.
uncomfortable. If you experience any hearing loss or ringing in the  Improper  installations  of  this  type  create  the  possibility  of  a  ?re
ears, you should consult an audiologist.              hazard and/or personal injury.
RADIO AND TELEVISION INTERFERENCE
WARNING: Changes or modi?cations to this instrument not expressly  • Reorient or relocate the receiving antenna.
approved  by Young  Chang  could  void  your  authority  to  operate  the  • Increase the separation between the instrument and the receiver.
instrument.
• Connect the instrument into an outlet on a circuit other than the one
IMPORTANT: When connecting this product to accessories and/or other  to which the receiver is connected.
equipment use only high quality shielded cables.
• If necessary consult your dealer or an experienced radio/television
NOTE: This instrument has been tested and found to comply with the  technician for additional suggestions.
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These  limits  are  designed  to  provide  reasonable  protection  against  NOTICE
harmful  interference  in  a  residential  installation.  This  instrument  This  apparatus  does  not  exceed  the  Class  B  limits  for  radio  noise
generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  emissions  from  digital  apparatus  set  out  in  the  Radio  Interference
installed  and  used  in  accordance  with  the  instructions,  may  cause  Regulations of the Canadian Department of Communications.
harmful  interference  to  radio  communications.  However,  there  is  no
guarantee that interference will not occur in a particular installation. If  AVIS
this instrument does cause harmful interference to radio or television  Le  present  appareil  numerique  n’emet  pas  de  bruits  radioelectriques
reception, which can be determined by turning the instrument off and on,  depassant  les  limites  applicables  aux  appareils  numeriques  de  la
the user is encouraged to try to correct the interference by one or more  class B prescrites dans le Reglement sur le brouillage radioelectrique
of the following measures:                            edicte par le ministere des Communications du Canada.
SAVE THESE INSTRUCTIONS
ii

Important Safety Instructions
1)   Read these instructions
2)   Keep these instructions.
3)   Heed all warnings.
4)   Follow all instructions.
5)   Do not use this apparatus near water.
6)   Clean only with dry cloth.
7)   Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
8)   Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
tus (including ampli?ers) that produce heat.
9)   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not ?t into your outlet, consult an electrician for replacement of the obso-
lete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories speci?ed by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table speci?ed by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type (CR2032).
15) Refer all servicing to quali?ed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
Warning- To reduce the risk of ?re or electric shock, do not expose this apparatus to rain or mois-
ture. Do not expose this equipment to dripping or splashing and ensure that no objects ?lled with
liquids, such as vases, are placed on the equipment.
To completely disconnect this equipment from the AC Mains, disconnect the power supply cord
plug from the AC receptacle.
iii