Лампы INVOLIGHT UVPRO400. Инструкция на английском языке

I   Technical Specifications:                                                1. Unplug the fixture completely from the electrical outlet and wait for
Item Code:    UV  PRO400                                                    15 minutes for cooling.
Name:          PROJECTION     LIGHT                                       2. Unscrew the fixing screws of the cover of the unit.
Voltage:       AC  24V,  50Hz
Bulb:          240V  400W  E40  MERCURIC     BULB                         3. Taking the lamp out of the unit body gently.
Fuse:          250V/5A                                                    4. Place the new lamp into the unit and then fixing the cover.
Weight:        8.0kg                                                      IV Caution:
Size:         L440  x W295  x H170mm                                      1. In order to reach a maximum of safety, the following points
should be carefully read and observed.
II   Operational Instructions:
2. Ambient temperature should not exceed 40?.
1.    Unpack the carton to check if there is any damaged or missing
parts when you receive the unit, call the local dealer if anything     3. Disconnect from the power supply before opening or replacement
is found not in a normal condition.                                       of  the  lamp  and  fuse.  Please  be  sure  the  lamp  is  cool  before
2.    Open the cover and install the lamp. Keep the lamp untouched              replacement!
by bare finger and disconnect the unit from power while                4. To avoid electrical shock, do not touch any live parts when the
re-lamping.                                                               unit is activated.
3.   Use  a  clamp  to  hang  the  unit  onto  the  truss  fasten  tight.  Tie  the  5. Call professionals for maintenance, no spare parts are included
unit steadily onto the truss by winding a chain through the                with  the  unit.  Always  completely  disconnect  the  fixture  from
bracket of the unit.                                                       electric and allow to cool for 15 minutes when Replacing the
4.   Use for indoor only.                                                       lamp or fuse
5.   Place the unit where there is efficient ventilation, away from any      6. These   units   are  for   commercial   use   and   contain   no
flammable and explosive objects.                                           user-serviceable parts inside. Servicing must be conducted by
6.   Check that the rated power corresponds to the main supply.                 qualified service person.
7. The lamp shall be changed if it has become damaged or thermally
III    Re-lamping:
deformed.

8. Please be sure to mount luminaries only as shown on the picture
below, means hanging on the bracket; Additionally, you can use a
stable base for the fixing of the luminaries.
9. Please ask an approved electrician because of special national
requirements for Electrical installation. No operation without
proof by skilled electrician in public area!
10. No naked flame sources, such as lighted candle, should be placed
on the apparatus,.
11. The use of apparatus should be in moderate climate.
12.The apparatus should not be exposed to dripping or splashing and
that  no  objects  filled  with  liquids,  such  as  vases,  shall  be  placed
on the apparatus.
V Installation:
SAFE CLAMP SRL- 530C
FROM YI N  YU
St eel wi r e  3mm or
t he equi val ent chai n
SCREWM10X20