LED PAR INVOLIGHT LEDPAR74. Инструкция на английском языке

DMX LED Par, 7*4-in-1 RGBW
User Manual
Our indoor par light offers many possibilities to achieve very nice laser effects which you want. It is specially
designed for the stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION
1.  Voltage: AC 100V-240V, 50Hz/60Hz
2.  Power consumption: 56W
3.  Current: 0.65A@110V, 0.28A@240V
4.  Fuse: 1A/125V@110V, 1A/250V@240V
5.  LED: 7* 4-in-1 8W led
6.  Beam angle: 28 degree
7.  Working environment: -10?~40?
8.  DMX channels: 4, 6, 8CH
9.  DMX linking: 3-pin
10.  Operation mode: DMX mode, slave mode, built-in programs, auto running, sound active, static color
11.  Lumen:    R      420lux@2m
G      515lux@2m
B      525lux@2m
W      455lux@2m
RGBW      1795lux@2m
12.  Power linking: 10pcs@110V, 24pcs@240V
B. OPERATION
This series of product has rich effect programs, easier operation, there are four working modes:
· Built-in programs
·Auto running mode
·DMX mode
·Slave mode
·Sound active mode
·Static color

1. Built-in Programs Mode
1) Press the “MODE”, enter built-in programs mode menu “  ”.
2) Press the “UP” or DOWN”, select the effect programs “  —   ”.
3) When the LED display show “    ”, press the “SETUP” can enter into static color editing environment, press
the “UP” or “DOWN” can select the static colors (1.rgb, 2.—r, 3.-rg, 4.—g, 5.-gb, 6.—b, 7.-bu, 8.—u, 9-rb, 10.ru.1
1.ug, 12.on, -OFF), and then press the “SETUP” can set the preset static color strobe “  ”, through the “UP” or
“DOWN” can adjust the strobe speed    ~    . when the LED display show “    —       ”, the first time
press the “SETUP”, will display “  ”, now through the “UP” or “DOWN” can set the programs operation speed
~     ; the second time press the “SETUP”, will show “  ”, now through the “UP” or “DOWN” can set the
programs strobe speed   ~   .
2. Auto Running Mode
Press the “MODE”, enter auto running mode menu “AUTO”.
?  In this mode, will operating the program segment which in built-in programs, the speed as same as the setting
operation speed in built-in programs mode.
3. DMX Mode
1) Press the “MODE”, enter DMX mode menu “    ”.
2) Press the “UP” or “DOWN”, set the DMX address value   ~   .
3) Press the “SETUP”, enter DMX working mode menu X-ch.
4) Press the “UP” or “DOWN”, set the DMX working modes:   ,     ,
DMX mode 1:
CH1      CH2      CH3       CH4
R       G         B        W
0-255   0-255     0-255    0-255
DMX mode 2:
CH1      CH2      CH3       CH4      CH5       CH6
R       G         B        W      Dimmer    Strobe
0-255   0-255     0-255    0-255     0-255    0-255
DMX mode 2:
CH1      CH2      CH3     CH4      CH5              CH6                 CH7          CH8
Master     R        G        B       W             Program              SPEED        Strobe
CH2—CH6          0
Pr.02       1-26
Pr.03       27-53
Pr.04       54-80
0-255     0-255   0-255    0-255   0-255       Pr.05      81-107        0-255        0-255
Pr.06      108-134
Pr.07      135-161

Pr.08      162-188
Pr.09      189-215
Pr.10      216-242
Sound Mode    243-255     Sensitivity
4. Master/slave Mode
Press the “MODE”, enter slave mode “    ”.
?  If in this mode, the fixture working mode will all follow the host changing.
5. Sound-Active Mode
1) Press the “MODE”, enter sound active mode “Soud”.
2) Press the “SETUP”, enter to set the sound active sensitivity.
3) Press the “UP” or DOWN”, the user can set the sound active sensitivity “  ~  ”, the maximum value is
31.
6. Static Color Mode
1) Press the “MODE”, enter static color mode “  ”.
2) Press the “SETUP” can select the static colors:   ,   ,      ,
3) Press the “UP” or “DOWN”, the user can adjust the monochrome brightness value, the maximum value is 255,
will achieve the color dimming effect.