Архитектурная подсветка INVOLIGHT LED ARCH400T. Инструкция на английском языке

Outdoor DMX LED magiflood
Our outdoor DMX LED magiflood offers many possibilities to achieve the effects which you want. It is for DJs, bands, nightclubs and
other performers who want a complete LED wash light system. Please read the manual before operation.
A. SPECIFICATION:
1.Size: 32.5*22.5*14cm
2.Weight: 4.6kg
3.Power input: AC 110V/240V ,60HZ/50HZ
4.Power consumption: 60W
5.LEDS: 18*tri-3W LEDS;
6.Beam angle:40degree
7. IP rate: IP65
8.Very powerful static colors effects
9.Perfect color mixing & wall wash effects for the buildings
10.Built-in programs, auto run, DMX mode, M/S, static colors
11.DMX channels: 1CH, 3CH, 5CH, 6CH
12.Safety eye available
13.extension cables is seperate sale
14.inner box:38*19.5*28cm
master carton:40*40*30cm
2 pcs/ctn
B.OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running mode, DMX mode,
Slave mode, static color mode.
“SETUP” is to set the relative specification for current mode.
“UP” is to add the value of current specification.
“DOWN” is to decrease the value of current specification.
Built-in programs-- running one of 10 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Static color mode-- to have static color effects from this function.
1?built-in program
1? Press the  “MODE”,enter the menu to choose the program“Pr.??”?
2? Press the  “UP”or  “DOWN”,choose the effect program Pr.01~Pr.10?
When the LED display showes Pr.01,press the  “SETUP”,enter the static color edit,press the
“UP”or  “DOWN”to choose the 7 kinds of static color (1.-r  ;2.-rg;3.-g;4.-gb;5.-b;6.-rb;
7.rgb),when it showes 7.rgb,press the  “SETUP”to adjust the brightness for the red?green?
blue through the  “UP”or  “DOWN”.press the  “SETUP”again to set up the strobe for the color

“FSxx”, press the  “UP”or  “DOWN”  to adjust the speed for the strobe FS00~FS99?
When the LED display showes Pr.02- Pr.10,first time to press the “SETUP”,itwill showes“SP.XX”,
then  you  can  set  up  the  speed  for  the  program  through  pressing  “ UP ” or
“DOWN”,SP01~SP100(FL);second time to press the  “SETUP”,it will showes“FSxx”, then you
can adjust the strobe speed through pressing the  “UP”or  “DOWN”,FS00~FS99?
2?auto running
Press  the  “MODE”,enter  the  auto  running“AUTO”,the  fixture  will  run  the  built-in  programe  by  itself
Pr.02~Pr.10,there are totally 9 built-in programs.the user can set up the running speed,the strobe speed
under the built in program. Pr.02~Pr.10then it will run accordign to the program which has been setted
up.
3?DMX mode
1? Press the  “MODE”,enter the DMX mode“d.???”?
2? Press the  “UP”or  “DOWN”,set up the DMX address d.001—d.512?
3? Press the  “SETUP”,enter the menu to set up the the DMX working mode X-ch?
4? Press the  “UP”or  “DOWN”,set up the DMX mode,there are 1-ch,3-ch,4-ch,6-ch four kinds of
working mode .
DMX working mode 1:1-ch
CH1
NO     DMX
FUNCTION
.     value
1      0         No use
2     1-22         red

3    23-45        green
4    46-68        blue
5    69-91        Cyan
6    92-114       yellow
7   115-137      orange
8   138-160        pink
9   161-183       purple
10   184-206     Dark blue
11   207-229    Pale green
12   230-252       white
13   253-255    Warm white
DMX working mode 2:3-ch
CHANNEL            VALUE                         FUNCTION
CH1                0-255                          RED
CH2                0-255                         GREEN
CH3               0-255                          BLUE
DMX working mode 3:4-ch
CHANNEL            VALUE                          FUNCTION
CH1                0-255                      MASTER DIMMER
CH2                0-255                          RED