Генератор дыма, снега, мыльных пузырей, конфетти INVOLIGHT FM2000 DMX. Инструкция на английском языке

FM2000 DMX
POWER FOG MACHINE
USER MANUAL
Please read over this manual before operation the machine

Function:                                                                         Avoid explode:
FM2000 DMX fog machine is widely used, and the spraying smoke is strong and makes unique living   Don’t add tinder liquid such as oil, gas, perfume and etc. in fog machine.
spot atmosphere, and has  ospraying air-loggedp  technique.                          Pay more attention to all notices sign and operation instructions on all machines.
Information
Please use the high quality fog liquid recommended by distributors. Bad quality fog liquid may
Heat-up Time: 10 minutes                                                             get blast or spray oil.
Time and ration control                                                              Often check whether there has enough fog liquid.
Smog oil capacity: 6L                       SCREEN                                   Get out all fog liquid before transport or post.
Spraying Distance: 15m                                                               Don’t eat fog liquid otherwise to see the doctor immediately. Use clean water to wash skin and
Weight: 16.5KG                                                                       eyes once fog liquid touches them.
Output: 30000cu.ff/min                FUNCTION       »    ?                        Remove package and check:
Voltage: AC110V, 220-250V 50/60Hz                                                    1.  Open carton to check whether all necessary spare parts include accord the specification list.
Powder: 3000W                                                                           Please contact distributor if there is something missed.
TIMER  VILUME  MANUAL
Circuitry controller operation                                                                                                       2.  Check the appearance of machine and power line to see whether they have some obvious
1eConnect  the  manual  controller  with the                                            damage. Please contact distributor once you find something and stop to use fog machine.
fogger, heat up the fogger, the screen display: “warming up”                        Installation:
2eWhen finishing heating up, screen displays” ready to fazer”                        1.  Take away all pack material especially the spray mouth.
3ePress “manual” button, fogger spray our fog once. Press the button continuously; fog will be out   2.  Set in the horizontal direction and open the cover of liquid can.
without stop. When screen displays ”Volume 100%”, the output is the largest!        3.  Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality
4ePress “volume”, fog will be out continuously, screen displays ”volume…. %” to show the output.   fog liquid will damage fog machine.
Output can be changed by “»” or “?”, other buttons can stop spray fog.              4.  Plug the plug of remote console in the socket of the back of machine.
5ePress ”function”, screen display ”man vol out…%”, the output can be changed       Operation:
Press ”function” twice, screen display ”interval set…s”, the interval time can be changed.       1.   Connect the power line to the power socket with earth line. Turn the switch at “On” and the
6ePress ”function” three times, screen displays “duration set …s”, the duration time for continuously   machine heat. The red LED of line console will light once the machine finish heat.
output can be changed                                                               2.   Press red key, the machine will spray fog (Press it as long as you need).
Attention:                                                                           3.   3.The red LED of remote console light  or not  means the machine can spray fog or  heat
Press “Timer”, screen displays interval…s”, screen displays the interval time.         itself.
Please obey all notices about operation. Safe and repair to avoid getting an electric shock and keep   4.   Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to
b
the excellent effect.                                                                 people directly and the lean angle should less than 15 .
Keep clean                                                                     5.   Often check whether there has enough fog liquid in machine. The operation will make big
Use in door.                                                                       damage to the machine if there has no fog liquid.
The power must same as located.                                                6.   If the fog is small, plum has  noise  or there has  no fog,  please power off and check fog
Put in the horizontal direction and don’t incline and place upside down.           liquid, fuse, the connector of remote console and power plug. If the problem could not be
Power off or pull out plug after use.                                              solved after check these parts, please stop check and send it back to distributor for repair.
No waterproof, if there are some humidity, water or fog liquid in it, please switch off power and       Repair:
contact distributor as soon as possible.                                               Please clean the fog machine timely to avoid the damage of spare parts and decrease the repair
There  are  no  spare  parts  with  machine.  If  you  need  to  repair  it,  please  contact  distributor  or   charge.
professional repair works.                                                             Don’t make the fog machine be dirty. Screw the cover of liquid can after add fog liquid.
Avoid fire                                                                                After about 40 hours continually use, please use 80% distilled water and 20% vinegar to clean
Only for adults operate. Equip it over the touch of children and pay more attention during operation.   the dirty in refractory pipe.
Don’t spray it to people directly and far away fire.                                Disassemble the spray mouth and use vinegar to clean it to keep expedite before heat.
The temperature of smoke is very high so that keep the space between machine and other material           Reequip the spray mouth after cool and add fog liquid for next use.
things more than 100cm.                                                              Others:
Put the machine at a drafty place and don’t cover the cool holes to keep the best cool effect. Keep the           Clean timely to extend the lifespan of machine.
space between the smoke machine and around things more than 20cm and between smoke machine           Use dry cloths to clean machine and keep dry while store.
and tinder more than 20cm. And without easily burnt things within 300cm