Микшерный пульт PIONEER DJM-2000. Инструкция на русском языке

DJ MIXER
TABLE DE MIXAGE
DJ-MISCHPULT
DJM-2000                                  MIXER PER DJ
DJ MENGPANEEL
MESA DE MEZCLAS DJ
DJ микшерный пульт
http://www.prodjnet.com/support/
The Pioneer website listed above provides answers to frequently asked questions, information about
software, and other up-to-date data of assistance to our customers.
Le site Web de Pionner ci-dessus fournit des reponses aux questions souvent posees, des informations
au sujet des logiciels et d’autres donnees mises a jour afin de venir en aide a notre clientele.
Auf der oben angegebenen Pioneer-Website werden unseren Kunden Antworten auf haufig gestellte
Fragen, Informationen uber Software und weitere Unterstutzung mit neuesten Daten angeboten.
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Handleiding
Manual de instrucciones
Инструкции по эксплуатации
DRB1497-B     1

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have fin-
ished reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of
connecting and operating the unit is the same.
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,   CAUTION:     The exclamation point within an equilateral
within an equilateral triangle, is intended to   TO PREVENT THE RISK OF ELECTRIC   triangle is intended to alert the user to the
alert the user to the presence of uninsulated   SHOCK, DO NOT REMOVE COVER (OR   presence of important operating and
“dangerous voltage” within the product’s   BACK). NO USER-SERVICEABLE PARTS   maintenance (servicing) instructions in the
enclosure that may be of sufficient   INSIDE. REFER SERVICING TO QUALIFIED   literature accompanying the appliance.
magnitude to constitute a risk of electric   SERVICE PERSONNEL.
shock to persons.
D3-4-2-1-1_A1_En
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT: THE MOULDED PLUG
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark    or the BSI mark    on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug
must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.
If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of
safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Blue : Neutral    Brown : Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows;
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
D3-4-2-1-2-2*_A1_En
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
K058b_A1_En
2   En
DRB1497-B     2

WARNING                                       If the AC plug of this unit does not match the AC
This equipment is not waterproof. To prevent a fire or   outlet you want to use, the plug must be removed
shock hazard, do not place any container filled with   and appropriate one fitted. Replacement and
liquid near this equipment (such as a vase or flower   mounting of an AC plug on the power supply cord of
pot) or expose it to dripping, splashing, rain or   this unit should be performed only by qualified
moisture.                                     service personnel. If connected to an AC outlet, the
D3-4-2-1-3_A1_En
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
WARNING                                       The equipment should be disconnected by removing
Before plugging in for the first time, read the following   the mains plug from the wall socket when left unused
section carefully.                            for a long period of time (for example, when on
The voltage of the available power supply differs   vacation).
according to country or region. Be sure that the                            D3-4-2-2-1a_A1_En
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear panel.          CAUTION
D3-4-2-1-4*_A1_En
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the power
WARNING                                       cord serves as the main disconnect device for the
To prevent a fire hazard, do not place any naked flame   unit, you will need to unplug it from the AC outlet to
sources (such as a lighted candle) on the equipment.  shut down all power. Therefore, make sure the unit
D3-4-2-1-7a_A1_En
has been installed so that the power cord can be
VENTILATION CAUTION                           easily unplugged from the AC outlet in case of an
When installing this unit, make sure to leave space   accident. To avoid fire hazard, the power cord should
around the unit for ventilation to improve heat radiation   also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
(at least 5 cm at rear, and 3 cm at each side).
on vacation).
WARNING                                                                    D3-4-2-2-2a*_A1_En
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,   POWER-CORD CAUTION
and to protect it from overheating. To prevent fire   Handle the power cord by the plug. Do not pull out the
hazard, the openings should never be blocked or   plug by tugging the cord and never touch the power
covered with items (such as newspapers, table-cloths,   cord when your hands are wet as this could cause a
curtains) or by operating the equipment on thick carpet   short circuit or electric shock. Do not place the unit, a
or a bed.                                    piece of furniture, etc., on the power cord, or pinch the
D3-4-2-1-7b*_A1_En
cord. Never make a knot in the cord or tie it with other
Operating Environment                        cords. The power cords should be routed such that they
Operating environment temperature and humidity:  are not likely to be stepped on. A damaged power cord
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH   can cause a fire or give you an electrical shock. Check
(cooling vents not blocked)                  the power cord once in a while. When you find it
Do not install this unit in a poorly ventilated area, or in   damaged, ask your nearest PIONEER authorized
locations exposed to high humidity or direct sunlight (or   service center or your dealer for a replacement.
strong artificial light)                                                        S002*_A1_En
D3-4-2-1-7c*_A1_En
En   3
2                                                                                                 DRB1497-B     3