Звуковая карта M-AUDIO Fast Track USB. Инструкция на английском языке

FAST TRACK USB
USER GUIDESER GUIDE
U
English

English
Introduction
Thank you for choosing the M-Audio Fast Track USB. Fast Track USB is your compact, professional audio solution for any Windows or
Macintosh computer.* It uses the convenience of USB connectivity, so there’s no need to disassemble your computer and no bulky external
power supplies. Fast Track USB gives you all you need for a complete, professional-quality recording setup on the go. With an XLR microphone
input and a TRS line/instrument input, stereo RCA outputs and headphone outputs, the Fast Track USB gives you full 24-bit digital audio,
supporting popular 44.1kHz and 48kHz sampling rates. With its lightweight form factor and compact design, you can carry it with you
anywhere.
Please take the time to read this brief Users’ Guide. It will explain how to install the Fast Track USB on your computer, and tell you how to
get the best performance out of your Fast Track USB audio interface.
* must meet minimum system requirements
What’s in the Box?
The following items are included with your Fast Track USB:
<  Fast Track USB audio interface
<  M-Audio Driver CD (includes driver installation software)
<  One (1) standard USB cable
<  Users’ Guide and warranty card
<  Session music creation software for Windows
Fast Track USB Features
<  Single USB 1.1 connection for input and output
<  ASIO 2, WDM and Core Audio drivers included
<  Balanced XLR mic-level input
<  Convenient front panel headphone output
<  Balanced 1/4” TRS line/instrument input
<  Signal and Peak LED input meters
<  Line/instrument level switch for TRS input
<  Sleek, slim plastic case with blue power LED
<  Two line-level RCA outputs
<  Completely USB powered (no power supply needed)
<  High-quality mic preamp providing 50dB of gain
<  One year warranty
M-Audio Fast Track USB     »     User Guide                      English     »     1

System Requirements
Windows
Minimum:                                 Recommended:
<  Pentium II 350 MHz                    <  Pentium III 500 MHz or faster
<  64 MB RAM                             <  128 MB RAM or more
<  Windows XP                            <  Available USB 1.1 port
<  CD-ROM drive                          <  Windows XP
<  Available USB 1.1 port
Macintosh
Minimum:                                Recommended:
<   G3,  G4,  iMac,  iBook  or  PowerBook  with  native  USB   <   G3,  G4,  iMac,  iBook  or  Powerbook  with  native  USB
support                                support (USB hubs are not supported)
<  64 MB RAM                            <  128 MB RAM
<  CD-ROM drive                         <  Mac OS X “Jaguar” version 10.2.8 or later
<   Mac OS X version 10.2.8 “Jaguar” or later, or Mac OS X
version 10.3.4 “Panther” or later
M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.
Front Panel Controls
1   .Input Level – Adjusts the gain level for the rear-panel XLR input (14).
2.  Peak LED – Indicates presence of peak input level from XLR input. Lights when input signal approaches –3dB before overload.
3.  Signal LED – Indicates presence of input signal from XLR input. Lights when input signal level approaches –40dB.
4.   Input/Playback Mix Control – Controls the ratio of input signal to playback signal from your DAW. (When you record, you
should mute the track you’re recording.  Otherwise, you’ll hear the analog input signal AND latency delayed recorded signal.)
5.  Mono Switch – When pressed, this switch sums the input signals to mono for direct monitoring.
2     »     English                            M-Audio Fast Track USB     »     User Guide