Микрофон динамический INVOTONE DM300PRO. Инструкция на английском языке

PROFESSIONAL DYNAMIC MICROPHONE
INVOTONE     DM-300  PRO    microphone,  the
structure  and  the  material  is  designed  specially  for
mobile-show, the mesh with a copper-solder structure,
the  body  with  a  zinc-alloy  material  and  a  bright,
smooth  surface  treatment,  experience  of  long  time
using for outdoor.                                       2.  Do not cover any part of the grille with your hand,
covering  the  grille  alters  the  sound  and  distorts
the  polar  pattern  increasing  the  chance  for
Specifications
feedback.
Element: Dynamic
Polar Pattern: Uni-Directional                           Cautions
Frequency: 60Hz~16kHz
1.  If the head of the microphone is covered by hand
Sensitivity: -55dB±3dB(0dB=1V/Pa at 1kHz)
or brought close to the speaker, a howling sound
Output impedance: 300?±30% (at 1kHz)                        may be generated. To prevent this, first decrease
the volume, then place the microphone so that it is
Frequency Response Graph                                    not  pointed  to  the  speaker  and  that  there  is  a
sufficient  distance  between  the  microphone  and
speaker.
2.  It is important to  keep foreign  particles  out  of the
grill  and  the  windscreen  because  they  may  alter
the  frequency  response  of  the  microphone.  The
(dB)
(Hz)                                                  grill  shall  be  periodically  cleaned  using  warm,
Frequency Response Graph                  soapy  water,  rinsed  with  plain  water  and  let  dry
before replacing.
Connecting and disconnecting the                         3.  Due to the high sensitivity of the cartridge, do not
drop it from high or apply strong shock to it.
microphone cable
4.  To  maintain  the  sensitivity  and  quality  of  sound
1.  Insert  the  XLR  connector  into  the  microphone.  If
reproducing,  avoid  exposing  it  to  moisture  and
necessary, rotate the connector to  align the key  on
extreme temperatures.
the  connector  and  the  groove  in  the  microphone.
Push  the  connector  into  the  microphone  until  it
clicks.
2.  To  disconnect  the  cable  and  microphone,  grasp
the  connector  while  depressing  the  tab.  pull  the
connector away from the microphone.
Usage
Stage   Microphone
Monitor
Sound
Loudspeaker                 Source
1.  For the best Gain-before-feedback and isolation
from  undesired  background  noise,  aim  the
microphone, toward the sound resource and away
from undesired sound resource.