Микрофон конденсаторный INVOTONE CM610PRO. Инструкция на английском языке

CONDENSER INSTRUMENT
MICROPHONE
INVOTONE  CM-610  PRO  is  the  latest    Connecting  And  Disconnecting  The  Microphone
condenser microphone for musical instruments.   Cable:
It  adopts  a  back  electret  condenser  capsule   1.  Insert  the  XLR  connector  into  the  microphone.  If
which  ensures  warm  and  rich  sound  at        necessary, rotate the connector to align the key on the
intermediate  frequencies  and  no  plosions  at   connector and the groove in the microphone. Push the
high ones enabling the real nature of the sound   connector into the microphone until it clicks.
to  be  reproduced  clearly.  It  can  be  used  for   2.  To  disconnect  the  cable  and  microphone,  grasp  the
orchestral instruments, pianos, etc.              connector while depressing the tab. Pull the connector
CM-610  PRO  professional  condenser         away from the microphone.
microphone is powered by 9V-52V DC phantom.
Its  standard  XLR  connector  matches  all  kinds  of  audio   Operation:
PHANTOM POWER
equipment.  It's  an  ideal  choice  for  acoustic  projects.  The   VOICE AMPLIFIER,  SUPPLIER
MIXER,
POWER AMPLIFIER
exceptional  design  and  durable  construction  make  it              XLRF        XLRM  XLRF
extremely attractive for the end-users.
Usage:
Specifications:                                         1.  Turn  on  your  amplifier  or  mixing  board  and  set  the
Element: Back Electret Condenser                           volume  control  to  minimum  position,  To  connect  the
Polar Pattern: Uni-directional                             phantom  power  to  the  microphone  turning  on  the
Frequency Response: 30Hz-18kHz                             phantom  switch,  accommodate  the  volume  control
Sensitivity: -38dB±3dB(0dB=1V/Pa at 1kHz)                  from low to  high  so  obtained  effect to your moderate
Output Impedance: 100?±30%(at 1kHz)                        level for protected the sauna from pounding.
Max. Input SPL: 135dB(at 1kHz  ?1% T.H.D)               2.  If the  head  of  the microphone  is covered  by  hand  or
Self Noise: 24dB A                                         brought close to the speaker, a howling sound may be
S/N Ratio: 70dB                                            generated. To prevent this, first decrease the volume,
Phantom Power Requirement: 9V-52V DC phantom               then place the microphone so that it is not pointed to
the  speaker  and  that  there  is  a  sufficient  distance
Frequency Response Graph:                                  between the microphone and speaker.
-20
3.  The sensitivity of cartridge is very fine, Don’t do drop.
-30
-40                                                       Hit it or apply strong shock to it.
-50                                                    4.  To maintain the sensitivity and quality of sound
(dBV/Pa)
-60
20    50  100  200  500  1K  2K   5K      20K
(Hz)                                                    reproducing,  avoid  exposing  it  to  moisture  and
Frequency Response Graph
extreme temperatures.
330      30
300            60
270                90
240            120
210      150
180
Uni-directional
(at 1kHz)