Портативный акустический комплект EUROSOUND BagAmp. Инструкция на русском языке

BagAmp
PORTABLE
SOUND
SYSTEM
USER MANUAL

FEATURES
Your BagAmp is a self-contained portable ampli?er system designed to be
an easy to carry solution for voice or music ampli?cation in small to medium
size settings.
General Design
BagAmp is a long thin column made from a rugged composite material that
contains a preampli?er, a power ampli?er, and loudspeakers in this one unit.
The preampli?er has two identical input channels that accept instrument
level (using a 1/4-inch phone plug), microphone, or line levels (using an XLR
plug), and provide signal level control, as well as phantom power for using
condenser microphones. The power ampli?er directly powers the eight (8)
75mm diameter AudioPiston ?at face loudspeakers.
Front panel controls are arranged as two vertical groups, one for each of
the two input channels, plus a master volume control, power indicator, and
mute button and indicator. Each channel has a Gain control, reverb control,
and EQ control. If a 1/4-inch phone plug is connected to the channel input the
system has a natural sensitivity appropriate for guitar or other instrument
pickup signal levels. If an XLR plug is connected, then the -10dB “pad” button
can be used to reduce the signal level of that input to avoid distortion or to
simply lower the level to best match the other channel being used. The
“Phantom” power button switches on and off 48VDC phantom power to both
channels. The “Master” volume knob adjusts the overall loudness of the
system. And, the “Mute” button shuts off the signal to both the internal power
ampli?er and to the rear panel line output.
• 250W RMS class D ampli?er provides high ef?ciency
and cool operation
• Eight 3” line array high-excursion piston speakers
• 2 XLR-1/4” combo inputs with independent control and
10dB attenuator switch
• Selectable 48V phantom power for condenser   microphones
material
• Constructed of durable, lightweight polymer composite
• Balanced XLR output with independent level control
connects to optional powered subwoofer (sold separately)
• Separate EQ control on each channel
• DSP Reverb with Level controls for each channel
• Main level control with mute switch
• Tripod speaker stand and nylon carrying bag included
for easy setup and transport
2

IMPORTANT SAFETY INSTRUCTIONS
Your Bag-Amp is made of a very durable polymer composite material. However, extra care should be
taken to  protect the ?nish and speakers. These simple tips will help reduce wear and tear on your
Bag-Amp.
1. Read all instructions before using.
2. Avoid direct contact with the speaker. Care should be taken to avoid damage to speakers.
3. Do not use or store around  excessive moisture.
4. At very high volume this product may be capable of producing sound levels that could cause hearing
damage. Do not operate at uncomfortable levels for prolonged periods. If hearing  loss  or ringing in ears
in experienced, consult  a physician.
5.  The Bag-Amp should  be positioned so that proper  ventilation  is maintained.
6. Keep away  from heat  sources such as radiators, heat vents, and other  devices (including ampli?ers)
that produce heat.
7. The Bag-Amp should be connected to a power supply  described in the operating instructions or as
marked.   Replace fuse with correct type, size, and rating.
8. The power supply cord should:  (1) be undamaged, (2) never share an outlet or extension cord with
other  devices so that the outlet has exceeded the maximum rating, and (3) never be left plugged into the
outlet when not being used for a long period of time.
9.  This product should be serviced by quali?ed  service personnel if:
•  The power supply  cord or the plug has been damaged.
•  One of the speakers has been damaged.
• There  has  been excessive exposure to rain.
• The Bag-Amp does not appear to operate normally or exhibits a change in performance.
• The unit  has  been dropped, or the enclosure damaged.
• Do not attempt to service  the product  beyond  what is described in these instructions. All other repairs
should be referred to quali?ed service personnel.
• Clean only with damp cloth.
• Use only with the supplied stand.
• Units designed with Class-I construction (like the Bag-Amp) must be connected to an outlet with a
grounded connection.
3