На сайте 124169 инструкций общим размером 502.7 Гб , которые состоят из 6277380 страниц
Руководство пользователя BEYMA TDWL4. Основные функции, характеристики и условия эксплуатации изложены на 2 страницах документа в pdf формате.
Доступно к просмотру 2 страницы. Рекомендуем вам скачать файл инструкции, поскольку онлайн просмотр документа может сильно отличаться от оригинала.
TD WL-4 TD WL-4 Constant Directivity Horn KEY FEATURES • Designed to be used with two WL-4 wave guides • It provides uniform response, on and off-axis with a neutral and natural frequency reproduction • Coverage angles of 90? in the horizontal plane and 20? in the vertical plane • Precise directivity control in the pass band • Cast aluminium construction GENERAL DESCRIPTION This horn has been designed to work specifically with two Beyma WL-4 wave guides providing uniform on and off-axis response. The constant directivity characteristics of this model ensure the ability to cover 90? wide horizontally and 20? wide vertically, at virtually any frequency within its operational range. To ensure freedom of resonance, this flare is constructed of cast aluminium, with flat front finish to facilitate flush mounting. TECHNICAL SPECIFICATIONS DIMENSION DRAWINGS Throat dimensions (WxH) 12 x 208 mm. 0.47 x 8.19 in. Horizontal beamwidth 90? (+22?, -46?) (-6 dB, 1.2 - 16 kHz) Vertical beamwidth 20? (+27? , -15?) (-6 dB, 2 - 16 kHz) Directivity factor (Q) 60 (average 1.2 - 16 kHz) Directivity index (DI) 15.5 dB (+7 dB, -8.1 dB) Cutoff frequency 800 Hz Dimensions (WxHxD) 210x260x147 mm. 8.27x10.2x5.79 in. Cutout dimensions (WxH) 174x247 mm. 6.85x9.72 in. Net weight 1.5 kg. 3.3 lb. Shipping weight 1.8 kg. 3.96 lb. Construction: Cast Aluminum 097
TD WL-4 TD WL-4 Constant Directivity Horn -6 dB BEAMWIDTH * DIRECTIVITY POLAR RESPONSE ** 800 Hz 1,25 kHz 2 kHz 3,1 kHz 5 kHz 8 kHz 10 kHz 12.5 kHz 16 kHz Notes: ** Horizontal response is represented by the pink line. Vertical response is represented by the blue line. *Horizontal beamwidth is represented by the discontinuous line. The polar plots are reproduction of measurements done with single sinusoidal signal tones, at the indicated frequencies. Vertical beamwidth is represented by the heavy line. The microphone was placed 2m. from the horn, and rotation was about the centre of the emitter source. Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain) · Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com · 097