Профессиональный динамик ВЧ BEYMA SMC60. Инструкция на английском языке

SMC60
SMC60
S M   S e r i e s
TECHNICAL SPECIFICATIONS
Throat diameter                           49 mm. 2 in.
Rated impedance                               8 ohms.
Minimum impedance                   6.9 ohms @ 3.3 kHz
D.C. Resistance                             5.5 ohms.
Power capacity *                   80 w AES above 1 kHz
Program power                        160 w above 1 kHz
Sensitivity **                        109 dB 1 w @ 1m
coupled to TD-460N horn
Frequency range                            0.5 - 18 kHz
Recommended crossover    0.8 kHz or higher (12 dB/oct. min.)
Voice coil diameter                   72.2 mm. 2.84 in.
Magnetic assembly weight                 4.1 kg. 9.02 lb.
Flux density                                    1.55 T
BL factor                                      8.8 N/A
DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter                      156 mm.   6.14 in.
Depth                                  75 mm.   2.95 in.
Mounting              Four M6 threaded holes, 90? apart on
101.6 mm (4 in.) diameter circle.
Mounting hardware is supplied.
Net weight                               4.5 kg.    9.9 lb.
Shipping weight                           5 kg.     11 lb.
MATERIALS
•   Diaphragm: titanium.
•   Voice coil:  edgewound aluminium ribbon.
•   Voice coil former: polyimide.                             Notes:
•   Magnet: ferrite.
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
GENERAL DESCRIPTION                                         **Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
This 2” professional high quality compression driver features a composite diaphragm assembly. The mylar surround provides damping and
avoids typical resonant peaks of metal surrounds. By the other hand, the pure titanium dome exhibits the unique mechanical properties of
this material. The diaphragm is attached to a 3” edgewound aluminium ribbon voice coil, providing exceptional high acoustic pressure over
an extremely wide frequency range. The use of a rim centred diaphragm allows field replacement without soldering.
FREQUENCY RESPONSE AND DISTORTION CURVES                 FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-400N  Note: on axis frequency response measured coupled to TD-460N
horn in anechoic chamber, 1w @ 1m.                        horn in anechoic chamber, 1w @ 1m.
Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·