Кроссовер BEYMA FD2XC1. Инструкция на английском языке

FD2XA / FD2XC1 / FD2XC2
FILTERS
KEY FEATURES
•   2 way filters
•   12 dB/oct. attenuation slope
•   Additional high frequency attenuation
•   High power components
•   Specially designed for the use with Beyma coaxials
GENERAL DESCRIPTION
These 2 way passive filters have been specifically designed to be used with the XA and XC Beyma coaxials, in order to achieve
an optimum performance of these drivers. Please, see attached filter selection guide to find the suitable filter model for each
coaxial model.
These filters offer the possibility of an additional attenuation of the high frequency unit. Anyway, this attenuation is only optional,
optimum performance of the coaxial is achieved without using it. However, if you wish to use it you can activate it by simply
removing the aluminium bridge labeled as «AT» on the back surface of the board (please see attached picture).
TECHNICAL SPECIFICATIONS                                       ADDITIONAL HF ATTENUATION
Type                                                      2 way
Crossover frequency*                          1.8 / 2 / 2.2  kHz
Power capacity                                           600 w
Low / High frequency impedance               8 / 16 ohms.
Attenuation slope                                 12 dB/oct.
H.F. attenuation                                   0, -1.5 dB
*Note: crossover frequency depends on model (FD2XA / FD2CX2 / FD2XC1).
FILTER SELECTION GUIDE
FILTER SELECTION GUIDE
FD2XA                    Use with 15XA38Nd & 12XA30Nd
FD2XC1                        Use with 12XC30 & 8XC20
FD2XC2                                Use with 10XC25
TRANSFERENCE FUNCTIONS
Note: FD2XA transference function.   Note: FD2XC1 transference function.  Note: FD2XC2 transference function.
Poligono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·
0562203